• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1556-1557
• /
• 2007

LCD BLU에 광원의 수명을 측정하고, 고장모드를 분석하기 위해서는 광원을 구성하고 있는 각각의 성분 중에서 광원 자체를 구성하고 있는 R/G/B 광원에 대한 Burn-in test 및 고장모드를 분석하였다. LCD BLU에 있어서 R/G/B LED광원의 역할은 BLU 자체의 수명과 성능에 가장 큰 영향을 미친다. 서로 각각 사용조건하에서의 수명과 성능의 차이에 따라서 BLU 자체의 수명이 결정된다. 이를 평가가기 위해 LED device에 대한 가속수명테스트를 위한 Burn-in test를 실시하였으며, 발생한 고장모드를 분석하였다. 분석결과 누설전류 증가로 인한 불량이 주로 발생하였다. 누설전류 증가를 평가하기 위해 Photo emission microscope(PHEMOS-1000, MoDooTEK Inc.)을 이용하여 저전류에서의 LED chip의 누설전류에 의한 발광을 관찰함으로 인해, LED chip의 신뢰성 및 평가 기준이 됨을 알 수 있다.

• Nuclear Engineering and Technology
• /
• 제38권6호
• /
• pp.535-550
• /
• 2006

The objectives of this paper are twofold to summarize the new findings and confirmed results from the Phebus FPT-1 experimental data and to report useful information to MELCOR users regarding the better use of MELCOR. For the core damage behavior, the early stage of a melt progression was predicted well; however, the late phase models, concerned with fuel dissolution, oxide cladding failure, fuel slumping, rubble debris heat up, effects of burn-up fuel, and so on, still showed limitations in MELCOR. For the fission product behavior, the comparison showed unexpected phenomena, various limitations, unresolved issues, and even absence of models. The issues summarized in this study have revealed the main areas where our endeavors need to be intensified in order to improve our understanding of severe accident phenomena. From the analysis of the Phebus FPT-1 test results, not only new core damage features, such as foaming or core expansion, but also possible new fission product release patterns due to effects from a high burn-up fuel have raised alternative challenging phenomena that should be solved in the next severe accident research phase.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.32-42
• /
• 1998

Lean burn gasoline engine is recognized as a promising way to meet better fuel economy. Lean burn engine is classified into port injection and direct injection(DI), DI is more active technique for improving fuel economy with ultra-lean operation, Nowadays, port injected lean burn engine has been produced by many Japan maker. Also, DI engine is also possible for production owing to improvement in control technique of spray, flow air fuel ratio. DI engine uses either homogeneous stoichiometric mixture or stratified mixture by controlling injection timing to be early or late respectively. HM(homogeneous mixture) is worse than SM(stratified mixture) in view of ultra-lean operation in partical load and Nox reducion by using EGR control. But, HM has advanteges in cold starting and emission reduction during transient operation, This paper describes experimental variables and bench test results of HM GDI engine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.1005-1008
• /
• 1999

HMC has developed the lean burn system with alpha 4-valve into domestic market in the end of 1997. In a viewpoint of saving energy and prevention of global warming (CO2 reduction), the lean burn system has recently attracted a considerable attentions in gasoline engines. There has been, however, difficulty in extending LML(Lean Misfire Limit) enough to meet the emission regulations and satisfaction of driveability. In this paper some descriptions will be given upon the new technology of lean bum engine which will be installed in Accent, especially the improvement of the combustion, the development of engine management system such as intake system and wide range air fuel control strategy, and the result of vehicle test.

• Natural Product Sciences
• /
• 제27권1호
• /
• pp.1-9
• /
• 2021

Methicillin-resistant Staphylococcus aureus (MRSA) infection often complicates burn wounds. Mupirocin is the antibiotic of choice for superficial MRSA infection, and its resistance is on the rise due to its frequent and widespread use. This study aimed to develop and evaluate Curcuma xanthorriza extract (CXE)-containing gel as a topical agent against MRSA-infected second-degree burn wound in rats. CXE was obtained using maceration with 96% ethanol. Xanthorrhizol level, antibacterial, and antioxidant activity were evaluated using a standardized method. In vivo, the wound's healing and bacterial load were evaluated every three days, whereas the histopathology of the wound was examined on day 12 of treatment. One-Way ANOVA and Kruskal-Wallis test were used to analyze the data. In this study, 27.0% and 7.10% of the obtained CXE were xanthorrhizol and curcumin, respectively. Additionally, an IC50 of 64.27 ppm was shown in antioxidant activity measurement, and MIC against MRSA was 5 mg/ml. Treatment with CXE-containing gels showed a significant reduction in bacterial load and proliferation of connective tissue in a dose-dependent manner. In conclusion, CXE-containing gel showed a greater reduction of bacterial load and more advanced wound healing phase than mupirocin.

• 대한불안의학회지
• /
• 제8권2호
• /
• pp.93-98
• /
• 2012

Objective : Cortisol, a product of hypothalamus-pituitary-adrenal axis (HPA axis), is one of our defensive mechanisms in response to stress. The level of cortisol in the saliva is a major biomarker of the stress response by HPA axis and shows diurnal variation. We measured salivary cortisol level and its diurnal variation to compare the pattern of changes by degree of burn and Clinician-Administered PTSD Scale (CAPS) score. Methods : We measured the salivary cortisol levels of 37 subjects hospitalized in the burn center at our facility from March to June 2012. Salivary cortisol levels were measured at 6 : 00 AM and at 7 : 00 PM. All subjects were tested for CAPS to evaluate the severity of posttraumatic stress disorder and the Hamilton Depression Rating Scale to evaluate and to control the coexisting depression. Results : Factorial ANOVA test revealed that there was a statistically significant difference in terms of the effect of the interaction between the degree of burn and the patient's CAPS score. Unlike the mild burn group, in the severe burn group, the patients who had a low CAPS score didn't show a normal diurnal variation and the patients who had a high CAPS score showed the normal diurnal variation. After a few months follow up, we found a greater degree of psychiatric complications in severe burn patients that had a lower cortisol stress response. Conclusion : We suppose that the disappearance of the stress response changes in salivary cortisol seen in the severe burn group may be caused by an impaired stress response. Through followed observation of the subjects, this disruption of cortisol response may cause psychiatric problems afterwards.

• 한국항공우주학회지
• /
• 제44권3호
• /
• pp.274-280
• /
• 2016

2015년 발사예정인 우주기반기술 검증용 큐브위성 STEP Cube Lab.의 주요 탑재체인 열선절단방식 힌지구동형 구속분리장치는 높은 체결력 및 저충격 구현의 장점으로 초소형위성 전개구조물의 구속/분리에 적용이 용이하며, 기존 나일론선 절단방식의 낮은 체결력 및 복수구조물 적용에 따른 시스템 복잡화의 단점을 극복가능하다. 본 논문에서는 인증모델 검증시험이 완료된 구속분리장치의 궤도검증 임무수행을 목적으로 체결력 검증 및 전개 확인 신호 획득이 가능한 비행모델을 설계/제작하였으며, 탑재체 레벨에서의 발사 및 궤도환경 검증시험을 수행하여 설계 유효성을 입증하였다.

• 한국토양비료학회지
• /
• 제44권3호
• /
• pp.380-386
• /
• 2011

시설재배 부추의 잎끝마름증상 발생에 영향을 미치는 인자를 구명하기 위하여 포항지역 부추 재배지 토양 132 개소의 토양특성을 분석하였고 통계적 방법으로 관련인자를 조사한 결과, pH는 7.0, 유기물함량 $41g\;kg^{-1}$로 적정 범위에 비해 높은 편이었으며 점토함량이 많은 식질토양인 Alfisols에서 pH, 치환성 양이온, 전기전도도, 질산태 질소함량이 높았고 잎끝마름증 발생비율이 높았으며 pH와 치환성 칼슘함량과 매우 높은 연관성을 나타내었다. pH가 높고 암모니아태 질소함량이 높을수록 암모니아 가스의 생성이 증가하였으며, 질산태질소와 토양유기물은 암모니아 가스 생성에 직접적인 영향은 없으나 토양의 pH 변화에 따라 질산태질소의 암모니아태 질소로 환원 및 유기태질소의 무기화에 따른 암모니아태 질소의 농도변화에 영향을 미치는 것으로 나타났다. 부추의 잎끝마름증은 토양 pH 변화에 따른 무기태질소의 환원에 따른 암모니아 가스생성에 따른 것으로 사료된다.

• 터널과지하공간
• /
• 제4권3호
• /
• pp.237-249
• /
• 1994

A new type of cut method, called SK-cut, was developed in order to overcome the shortcomings of the conventional V-cut and Burn-cut blasting methods. Total 190 times of test blasts were performed for the evaluation of the efficiency of new blasting method. V-cut, Burn cut and SK-cut were compared by applying them to the excavation of main gallery and construction tunnel of underground oil storage cavern. Test results showed that excavation efficiency of the new method was increased by 5.9~9.8% and that specific charge was reduced to 71~92%.

• 대한치과기공학회지
• /
• 제23권1호
• /
• pp.115-121
• /
• 2001

This study was investigated on effect of implant system about investment condition and burn out temperature. Posterior bridges were fabricated by using plastic sleeve and gold sylinder. The results were as follows; In plastic sleeve test and fitting cast copings. the phosphate bonded investment showed better gypsum bonded investment. The pure special liquid showed better margin fitness compared with mixed liquid (special liquid + distilled water). In gold cylinder test. the good burn out temperature of Ceramic PFG and Crown Gold was evaluated $0^{\circ}C$ to $820^{\circ}C$ and was decreased on $780^{\circ}C$ for 30 minutes. $0^{\circ}C$ to $750^{\circ}C$ and was decreased on $650^{\circ}C$ for 30 minutes.