• 제목/요약/키워드: burial test

검색결과 44건 처리시간 0.023초

비스코스 레이온과 리오셀의 생분해성 (Biodegradability of Viscose Rayon and Lyocell Fibers)

  • 윤창상;박정희;강연경;임승순
    • 한국의류학회지
    • /
    • 제29권3_4호
    • /
    • pp.470-477
    • /
    • 2005
  • This study was carried out to evaluate the biodegradability of viscose rayon and lyocell fibers, employing soil burial test, activated sludge test and enzymatic hydrolysis. Using X-ray analysis, crystallinity and morphology change was investigated. External changes after degradation were also observed by SEM and digital photographs. Vscose rayon fibers exhibited higher biodegadation than lyocell fibers, indicating that lower crystallinity favored the biodegradation. Among the biodegradability of lyocell fibers there was a tendency that fibers with lower crystallinity and higher moisture regain had higher values. When external changes after degradation being observed, it was shown that there were microorganisms growing on the surfaces of samples accompanying lading and weakening. From these results it was concluded that biodegradability of the specimens was most closely correlated to the moisture regain and crystallinity of fibers which reflects hydrophilicity and internal structure.

환경 조건에 따른 셀룰로스계 섬유의 생분해성 - 토양 수분율을 중심으로 - (Effect of Environmental Conditions on the Biodegradation of Cellulose Fibers - Effect of Humidity in Soil -)

  • 강연경;박정희
    • 한국의류학회지
    • /
    • 제29권7호
    • /
    • pp.1027-1036
    • /
    • 2005
  • Based on the correlation analysis result of preceding research, the biodegradabilities of cellulose fibers were closely related to the moisture regain of the samples, which reflects the hydrophilicity and internal structure of the fibers. In addition to this factor, it was expected that the biodegradation conditions influence the biodegradability of fibers. In this study, widely used cellulose fibers including cotton, rayon, and acetate were used. The biodegradabilities of cellulose fibers were measured by soilburial test, and then the degradation behaviors based on each condition were compared. Moreover, the effects of degradation conditions such as humidity of the soil were investigated. Changes in the internal structure of samples were also observed by X-ray analysis according to the soil burial time. It was shown that humidity of soil facilitated the degradation of cotton, rayon, and acetate fibers, showing higher degradation rate with higher humidity in soil. This effect was shown to be much greater in the fibers of high moisture regain such as cotton and rayon. In respect of microstructure change, crystallinities and their crystal size of fibers decreased remarkably in the soil of higher humidity. It was revealed that degradation of crystalline area was more dependent on the soil humidity than that of amorphous area.

Ion Pump Design for Improved Pumping Speed at Low Pressure

  • Paolini, Chiara;Audi, Mauro;Denning, Mark
    • Applied Science and Convergence Technology
    • /
    • 제25권6호
    • /
    • pp.108-115
    • /
    • 2016
  • Even if ion pumps are widely and mostly used in ultra-high vacuum (UHV) conditions, virtually every existing ion pump has its maximum pumping speed around 1E-6 mbar (1E-4 Pa). Discharge intensity in the ion pump Penning cell is defined as the current divided by pressure (I/P). This quantity reflects the rate of cathode bombardment by ions, which underlies all of the various pumping mechanisms that occur in ion pumps (chemisorption on sputtered material, ion burial, etc.), and therefore is an indication of pumping speed. A study has been performed to evaluate the influence of magnetic fields and cell dimensions on the ion pump discharge intensity and consequently on the pumping speed at different pressures. As a result, a combination of parameters has been developed in order to design and build an ion pump with the pumping speed peak shifted towards lower pressures. Experimental results with several different test set-ups are presented and a prototype of a new 200 l/s ion pump with the maximum pumping speed in the 1E-8 mbar (1E-6 Pa) is described. A model of the system has also been developed to provide a framework for understanding the experimental observations.

Analysis of underground post-tensioned precast concrete box utility tunnel under normal fault displacement

  • Wu, Xiangguo;Nie, Chenhang;Qiu, Faqiang;Zhang, Xuesen;Hong, Li;Lee, Jong-Sub;Kang, Thomas H.K.
    • Computers and Concrete
    • /
    • 제29권2호
    • /
    • pp.69-79
    • /
    • 2022
  • For long underground box utility tunnels, post-tensioned precast concrete is often used. Between precast tunnel segments, sealed waterproof flexible joints are often specified. Fault displacement can lead to excessive deformation of the joints, which can lead to reduction in waterproofing due to diminished contact pressure between the sealant strip and the tunnel segment. This paper authenticates utilization of a finite element model for a prefabricated tunnel fault-crossing founded on ABAQUS software. In addition, material parameter selection, contact setting and boundary condition are reviewed. Analyzed under normal fault action are: the influence of fault displacement; buried depth; soil friction coefficient, and angle of crossing at the fault plane. In addition, distribution characteristics of the utility tunnel structure for vertical and longitudinal/horizontal relative displacement at segmented interface for the top and bottom slab are analyzed. It is found that the effect of increase in fault displacement on the splice joint deformation is significant, whereas the effects of changes in burial depth, pipe-soil friction coefficient and fault-crossing angle on the overall tunnel and joint deformations were not so significant.

동합금 행정박물에 적용 가능한 표면강화처리제 비교 연구 (Comparative Study on Applicable Consolidants for Archival Objects of Copper Alloy)

  • 박창수;조현경;조남철;강대일
    • 보존과학회지
    • /
    • 제28권1호
    • /
    • pp.53-62
    • /
    • 2012
  • 행정박물이란 공공기관의 업무수행과 관련된 유형적 증거물로, 독특하고 유일하며 특정 사건, 시간, 또는 인물을 표현하는 정보적인 가치를 지니고 있다. 근대문화유산으로써의 가치를 지니고 있는 행정박물은 그 중요성에 비해 체계적으로 분류 관리 보존하는 지침은 마련되지 않았다. 이 중 금속제 행정박물의 경우 보존처리 및 연구사례가 적고 복합적인 행정적 가치를 지니고 있어 일반화된 발굴유물의 보존처리 과정을 적용하기 어렵다. 그러므로 본 연구에서는 강화처리에 초점을 두어 동합금 행정박물의 표면강화처리에 알맞은 재료와 적용방법을 실험을 통해 찾아보고자 하였다. 현재 사용하고 있는 Wax 3종과 발굴유물에 사용하는 아크릴계 수지를 선정하여 종류와 코팅방법에 따른 특성을 비교 분석하였다. 표면관찰, 박막 두께, 접착력, 접촉각 및 표면에너지, 황변실험 등 일련의 분석을 통해 코팅 특성을 비교한 결과, 아크릴계 수지를 행정박물에 사용해도 무방하나 기존에 사용하던 Wax B를 Dip-coating 한 후 가열처리하여 강화처리하는 것이 가장 우수한 강화효과를 얻을 수 있음을 확인하였다.

단일입자재현법(單一粒子再現法)을 활용한 고고유물의 진위판별 연구 (Authentication Test of Archaeological Materials using Single Grain Regenerative Dose Method)

  • 김명진;윤민영;홍덕균
    • 보존과학회지
    • /
    • 제23권
    • /
    • pp.73-80
    • /
    • 2008
  • 이 연구에서는 고고학 유물의 진위여부를 판단하기 위하여 미세시료채취법을 적용하여 시료를 채취한 후 화학적으로 분리된 세립 석영 입자의 고고선량을 산출하였다. 진위판별 연구에 앞서 미세시료채취법의 타당성은 백제무령왕릉 출토 전(塼)에서 산출된 고고선량 값들로부터 입증되었다. 이를 바탕으로 고구려 시대에 제작되었다고 주장되는 4점의 고고학 유물에 미세시료채취법을 적용하여 극소량의 시료를 채취한 후 단일입자재현법으로 고고선량을 산출하였다. 모든 유물에 대하여 고고선량 값은 0.2Gy 이하로 매우 낮았으며 단일시료재현법으로 산출된 값과 비교한 결과 매우 신뢰도가 높음을 알 수 있었다. 그러므로 유물의 고고학적 상황과 국내에서 고고선량은 평균적으로 1,000년 당 약 3.5Gy 내외의 값을 가진다는 점으로 미루어 판단하건데, 이 유물들은 고구려 시대에 제작된 유물이 아닐 가능성이 매우 높았다.

  • PDF

3D-GPR탐사를 이용한 도로하부 지반상태에 대한 연구 (A Sudy on the Underground Condition of Road Using 3D-GPR Exploration)

  • 이승호;장일호
    • 한국지반환경공학회 논문집
    • /
    • 제20권2호
    • /
    • pp.49-58
    • /
    • 2019
  • 3D-GPR탐사를 활용하여 도로하부 지반 상태 분석에 관한 연구를 수행하였다. 현장조건과 유사한 테스트베드를 조성하여 각 심도별 공동과 지중매설물에 대한 탐지 분석을 수행하였다. 이를 통해 지반의 유전율을 역산하여 파악하였고, 공동에 대한 탐지심도를 정확한 계산을 통해 확인할 수 있었다. 3D-GPR탐사를 통해 도로하부의 공동에 대한 신호파형을 확인하였고, 분석사의 경험적이고 주관적인 기존분석에 비하여 정량적인 분석방법 및 분석인자를 제시할 수 있었다. 도로하부의 지중침하에서도 3D-GPR탐사를 통해 침하분포 및 심도를 파악할 수 있었고, 지반보강 후 탐사해석단면을 통해 지반상태 변화를 확인하였다.

반복재하에 의한 고막껍질-풍화잔류토 혼합토의 변형 특성 (Characteristics of Shell-Residual Soil Mixture Deformation by Cyclic Loading)

  • 장용채;서지웅;이승은
    • 한국지반공학회논문집
    • /
    • 제25권8호
    • /
    • pp.47-55
    • /
    • 2009
  • 본 연구는 해양부산물로 발생되는 고막껍질을 재활용하기 위하여 매립이나 성토재료로 활용되고 있는 황토에 혼합 적용함으로써 친환경적인 건설재료의 대체재료로 활용성을 연구하는데 그 목적이 있다. 이를 위해 황토를 조립재료인 고막껍질과 혼합하여 반복삼축시험을 통하여 역학적인 특성을 알아보았다. 고막껍질-황토 혼합토의 혼합비율은 중량비를 이용하였으며 황토에 고막껍질을 일정한 함유율로 혼합한 고막껍질의 혼합비율은 5종류로 하고 각각의 혼합토에 대해 반복삼축시험을 실시하였다. 반복삼축시험 결과 고막껍질 치환 함유율이 20.0% 이상인 혼합토에서 액상화저항성에 한계가 있는 것으로 나타났다. 따라서 본 연구에서는 고막껍질-황토 혼합토의 액상화 저항성을 증대시키고자 약간의 유리섬유를 첨가 하여 입증하였다.

Seed longevity of glyphosate resistant transgenic creeping bentgrass (Agrostis stolonifera L.) lines

  • Hancock, Daniel;Park, Kee Woong;Mallory-Smith, Carol A.
    • Journal of Ecology and Environment
    • /
    • 제38권4호
    • /
    • pp.437-442
    • /
    • 2015
  • Studies to estimate seed longevity and dormancy of creeping bentgrass (Agrostis stolonifera L.) were conducted from 2000 to 2005 at Corvallis and Hermiston, Oregon. Seeds from three transgenic glyphosate resistant creeping bentgrass lines, 48-10, 48-13, and ASR368, and one non-transgenic glyphosate susceptible line, SR1020, were used. Creeping bentgrass seeds were buried at 3, 18 and 31 cm in 2000 and removed 6, 12, 18, 24, and 51 months later. Soil type and climatic conditions were different at the two locations. At Corvallis, the soil was a Malabon silty clay loam, and the winters wet and mild. The soil at Hermiston was an Adkins fine sandy loam, and winters drier and colder. Seeds of all creeping bentgrass lines deteriorated faster at Corvallis than at Hermiston. The estimated half-lives of creeping bentgrass lines buried at Corvallis were 8.4 to 20.2 months, while those buried at Hermiston were 8.4 to 37.7 months. At both sites, seeds of the glyphosate resistant lines, 48-10 and 48-13, deteriorated faster than the susceptible line, SR1020. However, seed deterioration in the resistant line, ASR368, was slower than all other creeping bentgrass lines. Based on the germination test, exhumed intact seeds at Corvallis were more dormant than those at Hermiston. If buried, it could be expected that viable creeping bentgrass seeds will persist more than 4 years after the seeds are introduced to a site, but environmental conditions can influence both seed longevity and dormancy.

XLPE/EPR 계면의 부분방전 패턴 분석을 위한 신경망 모형 (Neural Network Model for Partial Discharge Pattern Analysis of XLPE/EPR Interface)

  • 조경순
    • 한국컴퓨터산업학회논문지
    • /
    • 제6권2호
    • /
    • pp.357-364
    • /
    • 2005
  • 최근 들어 우리나라에서는 설치의 간편성과 높은 신뢰도를 가진 전력케이블의 사용이 증가하고 있다. 전력케이블은 출고 전에 IEEE std. 404-1993 시험을 거쳐 안정성을 확인하고 있지만 포설시 발생하는 접속부 내부의 결함으로 인하여 많은 문제가 발생하고 있다. 특히 불순물 혼입 또는 공극 발생시 고장율은 증가하게 된다 부분방전 검출은 포설 후 전력케이블의 상태를 관측할 수 있는 유용한 방법이다. 본 연구에서는 부분방전 특성을 평가하고자 케이블 접속재인 EPR과 케이블 절연체인 XPLE 사이에 인공 결함을 발생시킨 후 데이터 취득 시스템을 이용하여 $\Phi-q-n$ 특성을 검출하였으며, 부분방전의 정량적 해석을 위해 필요한 통계량을 계산하였으며, 신경망 모델을 적용하여 패턴 분석을 수행하여 $88\~96\%$의 구별이 가능하였다.

  • PDF