• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.201-202
• /
• 2006

To analyze the dynamic characteristics of the bundle drawing process, we employed a Random Phase Spectrum method to generate stochastic test signals that had a given autocorrelation function. And the spectra of the dynamics of the process outputs were obtained, based on the dynamic model of the bundle drawing process. Results showed that the RPS method was very effective to generate stochastic signals that had an exponential function form. The drawing process had the traits that there existed a special frequency range, incurring the process resonance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1643-1646
• /
• 2003

Drawing is a mechanical operation that attenuates thick material to an appropriate thickness for the next processing or end usage. When the input material has the form of a bundle or bundles made of very thin and long shaped wire or fibers, this attenuation operation is called "bundle drawing" or "drafting" Drafting is being used widely in manufacturing staple yarns. which is indispensable for the textile industry. However, the bundle processed by this operation undertake more or less defects in the evenness of linear density. Such irregularities cause many problems not only for the product quality but also for the efficiency of the next successive processes. Since long there have been many researches tying to find out factors affecting the irregularity of linear desity, to obtain optimal drafting conditions, to develop efficient measuring and analysis methods of linear density of bundle, etc., but there exists yet no fundamental equation describing the dynamic behavior of the flowing bundle during processing. In this research a mathematical model for the dynamic behavior of the bundle fluid is to be set up on the basis of general physical lows representing physical variables, i.e. linear density and velocity as the dynamic state of bundle. The conservation of mass and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results could be confirmed by the experiments under various conditions.

• 한국CDE학회논문집
• /
• 제1권3호
• /
• pp.177-188
• /
• 1996

An approach to providing computational support with an expert shell is discussed with the scope of an industrial wire harness design, especially at a manufacturing stage. Key issues include the development of an architecture that supports a frequent design change among engineers associated with different parts of the wiring design process and the development of hierarchical representations that capture the different characteristics (e.g., connectivity, configuration) of the harnesses. The abstraction of design information results in features, while the abstraction of drawing elements leads to the definition of objects. These abstractions are essential for efficient transactions among people and computer tools in a domain that involves numerous interacting constraints. In this paper the strategy for the problem decomposition, the definition of features, and the ways in which features are shared by various operations and design changes, are discussed. We conclude with a discussion of some of the issues raised by the project and the steps underway to address them.

• 소성∙가공
• /
• 제13권7호
• /
• pp.623-628
• /
• 2004

This paper is concerned with pressure welding, which has been known as a main bonding mechanism during the cold and warm forming such as clad extrusion or bundle extrusion/drawing. Bonding characteristics between the Cu and Al plates by pressure welding are investigated focusing on the weak bonding. Experiments are performed at the cold and warm temperatures ranging from the room temperature to $200^{\circ}C$. The important factors examined in this work are the welding pressure, pressure holding time, surface roughness, and temperature. A bonding map, which can identify the bonding criterion with a weak bonding strength of IMPa , is proposed in terms of welding pressure and surface roughness fur the cold and warm temperature ranges.

• 만화애니메이션 연구
• /
• 통권46호
• /
• pp.207-231
• /
• 2017

판화는 순수예술의 한 분야이면서 에디션(edition)이라는 특수성 때문에 대중적인 성격을 띤 상업적 결과물로 인식되는 모호한 경계에 놓여져 있다. 현대의 과학기술 발전은 판화의 새로운 기법을 발달시켰고 디지털(digital)이라는 컴퓨터와의 융합은 복제예술로서의 가능성을 보여주었다. 복제 판화는 사진과 접하며 확장된 영역으로의 지대한 영향을 받았고 프린트의 다양한 형태는 간접예술의 가능성을 여러 각도로 자극함으로써 많은 변화와 시도를 가져왔다. 판화와 과학기술의 역사가 밀접하게 관련되어 있듯이 컴퓨터의 발달은 복수예술성의 광범위한 영역확대, 기술적, 예술적 변화를 시도하게 만든다. 디지털이 갖는 매끈한 평면위에 판화의 물성을 얹음으로 단순히 복사된 이미지 위에 새로운 개념의 형상을 만들어낼 수 있는 과정과 결과는, 일품미술의 가치 혹은 판화가 주는 물성의 특성과는 또 다른 독특한 작품의 영역을 보여준다. 복제성에 대한 폄하된 인식은 판화와 직결된 의미로 작품의 가치를 평가하였고 복제된 각 에디션의 가치와는 무관하게 한 묶음의 작품으로 평가절하 되는 것은 부인 할 수 없는 사실이다. 그러나 종이 위에 찍혔던 판화의 물성은 캔버스위에 손으로 직접 그리는 핸드드로잉(hand drawing)과 함께 올려지고, 디지털 프린트라는 정보의 종이위에 결합하는 과정을 통해 새로운 면모와 변화를 보여주는 계기가 된다. 매체가 주는 다양성은 예술과 과학기술사이에서 때로는 정체성의 논란이 되기도 한다. 앞으로 예술의 영역에서 누릴 수 있는 매체성의 한계를 어떤 기준으로 정할 수 있을지도 논의가 되어야 할 것이다.