• 제목/요약/키워드: bulk treatment

검색결과 432건 처리시간 0.027초

하수슬러지의 산과 초음파 처리에 따른 ECP(exocellular polymers)의 거동이 탈수성과 침강성에 미치는 영향 (Effects of ECP (exocellular polymers) Changes to the Dewaterability and Settlability of Wastewater Sludge Pretreated by Acid and Ultrasonic)

  • 황선진;정규호;황규대
    • 상하수도학회지
    • /
    • 제16권6호
    • /
    • pp.733-740
    • /
    • 2002
  • The effects on dewaterability and settlability of wastewater sludge according to acid and ultrasonic pretreatment which was expected to change ECP (exocellular polymers) compounds in the sludge and bulk solution was investigated. Though ECP which attached to the sludge could stimulate coagulation of sludge particles by bridging effect, but ECP in the bulk solution deteriorated dewaterability and settlability of the sludge on the contrary. That is as the pH of the solution was decreased to 3 gradually by acid treatment, proportionally ECP in the bulk solution was attached to the sludge flocs and resulted in improvement of dewaterability and settlability of the sludge. In case of ultrasonic pretreatment, with proportional to the intensity and duration of ultrasonic application, ECP was detached and extracted from sludge flocs and these phenomena deteriorated dewaterability and settlability. Also because of the increasement of minute sludge particles according to ultrasonic, dewaterability became so much the worse.

Feasible waste liquid treatment from electroless nickel-plating by intense magnetic field of HTS bulk magnets

  • Oka, T.;Furusawa, M.;Sudo, K.;Dadiel, L.;Sakai, N.;Seki, H.;Miryala, M.;Murakami, M.;Nakano, T.;Ooizumi, M.;Yokoyama, K.;Tsujimura, M.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제23권3호
    • /
    • pp.37-40
    • /
    • 2021
  • Nickel (Ni) is a kind of the rare earth resources. Since Ni-containing waste is drained after several plating operations in the factories, the effective recycling technique has been expected to be introduced. An actual magnetic separation technique using HTS bulk magnet generating the strong magnetic field has succeeded in collecting the paramagnetic slurry containing Ni-sulphate coarse crystals which were fabricated from the Ni-plating waste. The Ni compound in the collected slurry was identified as NiSO4/6H2O, showing slight differences in the particle size and magnetic susceptibility between the samples attracted and not-attract to the magnetic pole. This preferential extraction suggests us a novel recycling method of Ni resource because the compound is capable of recycling back to the plating processes as a raw material.

고밀도, 등방성 탄소의 제조에 관한 연구 (Preparation of Isotropic Carbon with High Density)

  • 오종기;이선우;박광원
    • 한국세라믹학회지
    • /
    • 제28권11호
    • /
    • pp.908-916
    • /
    • 1991
  • The characteristics of the carbonized and calcined products made from coal tar pitch coke and coal tar pitch, were investigated in the aspect of the manufacture of isotropic graphite with high density. The mesophase from the pitch was rapidly formed at higher heat-treatment temperature between 410$^{\circ}C$ and 450$^{\circ}C$, where the insolubes in the pitch accelerated the rate of nucleation and growth of the mesophase. The benzene insolubles and the quinoline insolubes were increased as the heat treatment temperature and the heat-treatment time increased. The ratio of benzene insolubles and quinoline solubles (BI/QS) was decreased as the heat-treatment temperature was higher and maintained to be nearly constant regardless of heat-treatment time at fixed heat treatment temperature. The bulk density of the calcined carbon was linearly proportional to the ratio of quinoline solubes to volatile matter in the green coke. Anisotropic ratio of electrical resistance was measured to be between 0.98 and 1.10.

  • PDF

ITO 전극의 오존 표면처리에 의한 플렉시블 PCDTBT : PC71BM 유기박막 태양전지의 성능 개선에 관한 연구 (A Study on the Performance Improvement for Flexible PCDTBT : PC71BM Organic Thin Film Solar Cell by Ozone Surface Treatment of ITO Electrode)

  • 노임준;임영택;신백균
    • 조명전기설비학회논문지
    • /
    • 제26권11호
    • /
    • pp.104-108
    • /
    • 2012
  • Flexible organic thin film solar cell device with Bulk Hetero-Junction (BHJ) structure was fabricated with blended conjugated polymer of PCDTBT : $PC_{71}BM$ as active layer. Surface of ITO anode for the organic solar cell device was treated with ozone. The organic solar cell device with bare ITO showed short circuit current density ($J_{sc}$) of $8.2mA/cm^2$, open-circuit voltage ($V_{oc}$) of 0.73V, fill factor (FF) of 0.36, and power conversion efficiency (PCE) of 2.16%, respectively. The organic solar cell device with ozone treated ITO anode revealed distinctively improved performance parameters:$J_{sc}$ of $9.8mA/cm^2$, $V_{oc}$ of 0.82V, FF of 0.43, PCE(${\eta}$) of 3.42%.

Cancer stem cell metabolism: target for cancer therapy

  • Chae, Young Chan;Kim, Jae Ho
    • BMB Reports
    • /
    • 제51권7호
    • /
    • pp.319-326
    • /
    • 2018
  • Increasing evidence suggests that cancer stem cell (CSC) theory represents an important mechanism underlying the observed failure of existing therapeutic modalities to fully eradicate cancers. In addition to their more established role in maintaining minimal residual disease after treatment and forming the new bulk of the tumor, CSCs might also critically contribute to tumor recurrence and metastasis. For this reason, specific elimination of CSCs may thus represent one of the most important treatment strategies. Emerging evidence has shown that CSCs have a different metabolic phenotype to that of differentiated bulk tumor cells, and these specific metabolic activities directly participate in the process of CSC transformation or support the biological processes that enable tumor progression. Exploring the role of CSC metabolism and the mechanism of the metabolic plasticity of CSCs has become a major focus in current cancer research. The targeting of CSC metabolism may provide new effective therapies to reduce the risk of recurrence and metastasis. In this review, we summarize the most significant discoveries regarding the metabolism of CSCs and highlight recent approaches in targeting CSC metabolism.

탄소/탄소 복합재 매트릭스 전구체로서의 메조페이스 핏치의 제조 및 특성에 관한 연구 (Preparation and Characterization of Mesophase Pitches as a Matrix Precursor of Carbon Fiber Reinforced Carbon Composite)

  • 정현진;임연수
    • 한국세라믹학회지
    • /
    • 제33권12호
    • /
    • pp.1387-1393
    • /
    • 1996
  • A study on mesophase pitch as a matrix precursor of carbon fiber reinforced carbon (C/C) composite has been recently presented. This study is concerned with the production of mesophase pitch as matrix precursors for C/C composite from coal tar pitch. A commercial coal tar pitch was heat-treated at 25$0^{\circ}C$ for 2 hours to remove low molecular weight fraction from the pitch then increasing the temperature of the pitch to between 350~45$0^{\circ}C$ to produce mesophase pitch. The pitch was continuously stirred during this time and nitrogen gas was continuously bubbled through the pitch. Spherical and bulk mesophases were formed in the pitch after heat-treatment,. Parent and mesophae pitches were characterized by elemental analysis coke yield solubi-lity in tetrahydrofuran and hexane and an optical microscopy to measure the mesiophase content. It was neces-sary to produce C/C composite that a mesophase pitch with about 30-40 vol% mesophase spherulites can be infiltrated into a fiber preform without a filter effect as a matrix precursor conditions. This condition was satisfied with mesophase pitch heat treated at 40$0^{\circ}C$ for 2 hours. The other heat treatment conditions showed the nuclei of mesophase or bulk mesophae which were not satisfied with the matix precursor condition.

  • PDF

Effect of Sesame Straw Biochar Application on Soil Physics and Nitrous Oxide Emission in Upland Soil

  • Kang, Se-Won;Cho, Ju-Sik;Kim, Hyun-Tae;Seo, Dong-Cheol;Moon, Sung-Dong
    • 한국토양비료학회지
    • /
    • 제49권3호
    • /
    • pp.259-264
    • /
    • 2016
  • The effect of biochar application on soil physics and nitrous oxide ($N_2O$) emission from upland soil for broccoli cultivation was investigated. Sesame straw biochar (SB) was applied at amounts 0 (IF), 50 (SB50), 100 (SB100), 200 (SB200) kg $10a^{-1}$, respectively. SB addition to the upland soil decreased bulk density, and increased porosity and soil respiration. The $N_2O$ emission rates in all treatments were higher in the order of IF $${\geq_-}$$ SB50 > SB100 $${\geq_-}$$ SB200 treatments. Global warming potential in SB200 treatment decreased by 15.1% compared to IF treatment. Therefore, SB application in upland soil can improve soil physics and reduce $N_2O$ emission.

Effects of heat treatment temperature on the formation of MgB2 bulk superconductors prepared using MgB4 and Mg powder

  • Kim, S.H.;Kang, W.N.;Lee, Y.J.;Jun, B.H.;Kim, C.J.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제19권1호
    • /
    • pp.42-46
    • /
    • 2017
  • The effects of the heat treatment temperature ($600^{\circ}C-1050^{\circ}C$) on the formation of $MgB_2$ and the superconducting properties have been examined. The self-synthesized $MgB_4$ and commercial Mg powders were used as raw materials for the formation of $MgB_2$. The superconducting critical temperatures ($T_cs$) of $MgB_2$ bulk superconductors prepared at $600^{\circ}C-850^{\circ}C$ were as high as 37-38 K regardless of the heat treatment temperature. However, because $MgB_4$ is more stable than $MgB_2$ at above $850^{\circ}C$, no superconducting signals were detected in the susceptibility-temperature curves of the samples prepared above $850^{\circ}C$. As for the critical current density ($J_c$), the sample heat-treated at a low temperature ($600^{\circ}C$) for a prolonged period (40 h) showed a Jc higher than those prepared at $650^{\circ}C-850^{\circ}C$ for a short period (1 h). The FWHM (full width at half maximum) result showed that the grain size of $MgB_2$ of the $600^{\circ}C$ sample was smaller than that of the other samples. The high $J_c$ of the $600^{\circ}C$sample is attributed to the presence of large numbers of grain boundaries, which can act as flux pinning centers of $MgB_2$.

현존선에 전기분해방식 선박평형수 처리장치 설치를 위한 위험도 평가 분석 (Risk Assessment for Retrofitting an Electrolysis Type Ballast Water Treatment System on an Exiting Vessel)

  • 지재훈
    • 수산해양교육연구
    • /
    • 제29권3호
    • /
    • pp.665-676
    • /
    • 2017
  • Over the past several years, sea trade have increased traffic by ships which highlighted a problem of unwanted species invading the surrounding seas through ship's ballast water discharge. Maritime trade volume has continuously increased worldwide and the problem still exists. The respective countries are spending billions of dollars in an effort to clean up the contamination and prevent pollution. As part of an effort to solve marine environmental problem, BWM(Ballast Water Management) convention was adopted at a diplomatic conference on Feb. 13 2004. In order to comply harmoniously this convention by each country. This convention will be effective after 12 months from the date which 30 countries ratified accounting for more than 35% of the world merchant shipping volume. On Sep. 8 2016, Finland ratified this convention and effective condition was satisfied as 52 states and world merchant vessel fleet 35.1441%. Thus, after Sep. 8 2017, all existing vessels shall be equipped with BWTS(Ballast Water Treatment System) in accordance with D-2 Regulation, which physically handles ballast water from ballast water exchange system(D-1 Regulation). In this study, we analyzed in detail the optimal design method using the Risk Analysis and Evaluation technique which is mainly used in the manufacturing factory or the risky work site comparing with the traditional design concept method applying various criteria. The Risk Assessment Method is a series of processes for finding the Risk Factors in the design process, analyzing a probility of the accident and size of the accident and then quantifying the Risk Incidence and finally taking measures. In this study, this method was carried out for Electrolysis treatment type on DWT 180K Bulk Carrier using "HAZOP Study" method among various methods. In the Electrolysis type, 63 hazardous elements were identified.

산림환경 변화가 토양내 수저유능력과 유출에 미치는 영향 (Effect of change in forest environment on water storage capacity in soil and streamflow)

  • 남이;박승기
    • 한국토양환경학회지
    • /
    • 제2권2호
    • /
    • pp.35-51
    • /
    • 1997
  • 강원도 평창군 연평면과 용평면 일원에 위치한 백옥포유역과 이목정유역에서 산림의 환경변화(임상차이 및 피해목 벌채)가유출과토양내 수저유능력에 미치는 영향을 구명하기 위하여 1983∼1993년의 유출량, 유출률, 유황곡선등을 분석하였다. 또한 유출 구성성분중 총유출량, 직접유출량, 토양내 가비중, 전공극량, 조공극, 세공극, 투수성, 유출가능수량을 분석하였다. 유출을, 유출량, 유황곡선은 임상이 불량한 이목정유역이 임상이 양호한 백옥포유역보다 높게 나타났으며, 두시험유역 모두에서 전처리기간이 처리기간보다 낮게 나타났다. 또한 벌채에 의한 산림환경변화에 따라 융설촉진 현상이 처리기간에 크게 일어났으며, 융설지연 현상으로 인한 산림효과가 전처리기간에 나타났다 산림환경변화에 따른 토양의 물리적 성질중 가비중, 전공극량(조공극, 세공극), 투수성, 유출가능수량에서도 백옥포유역이 이목정유역보다 양호하였으며, 두 시험유역 모두에서 전처리기간이 처리기간보다 양호한 결과를 나타내어 산림환경 변화에 따른 수자원함양기능의 중요성을 제시하였다.

  • PDF