• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.4
• /
• pp.281-287
• /
• 2013

Due to its high salt content and poor physical properties in reclaimed tidal lands, it is important to ameliorate soil physical properties to improve the efficiency of desalination. The objective of this study was to evaluate the changes of soil properties at Saemangeum reclaimed tidal saline soil with various soil amendments. Field experiment was conducted at Saemangeum reclaimed tidal land in Korea and the dominant soil series was Munpo series (coarse loamy, mixed, nonacid, Mesic, Typic, Fluvaquents). Woodchips, crushed-stone, oyster shell, coal bottom ash, and rice hull were added as soil amendments and mixed into surface soil to improve soil physical properties. There was large variability in soil hardness, but oyster shell treatment was significantly lower soil hardness at surface layer. Soil hardness was not significantly different below 15 cm depth. Infiltration rate was also significantly greater at oyster shell treatment. This may be due to the leaching of Ca ions from oyster shell and improved soil properties. However, there was no statistical significant difference of the soil bulk density, moisture content, and porosity. Improved physical properties increased desalinization rate in soil and retarded the resalinization rate when evapotranspiration rate was high. Although soil salinity was significantly decreased with oyster shell amendment, soil pH was increased that should be made up as a soil amendment. Our results indicated that oyster shell application increased infiltration rate and improved soil hardness, and thus oyster shell could be used to improve soil salinity level at Saemangeum reclaimed tidal saline soil.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.5
• /
• pp.243-250
• /
• 2011

When alloys are vacuum-deposited on cooled substrates, super-rapidly cooled alloy films in the unequilibrium state can be obtained. As an application of this method, Ag-Cu, Ag-Ni and Ag-C alloys were successfully produced, and their mechanical properties with tempering temperature were investigated. The following results were obtained : (1) In case of Ag-Cu alloys, the solid solution was hardened by tempering at $150^{\circ}C$. The hardening is considered to occur when the solid solution begins to decompose into ${\alpha}$ and ${\beta}$ phases. The Knoop hardness number of a 40 at.%Ag-Cu alloy film deposited on a cooled glass substrate was 390 $kg/mm^2$. The as-deposited films were generally very hard but fractured under stresses below their elastic limits. (2) In case of Ag-Ni and Ag-C alloys, after the tempering of 4 at.%Ni-Ag alloy at $400^{\circ}C$ and of 1 and 2 at.%C-Ag alloys at $200^{\circ}C$, they were hardened by the precipitation of fine nickel and carbon particles. The linear relationship between proof stress vs. $(grain\;diameter)^{-l/2}$ for bulk silver polycrystals can be applied to vacuum-deposited films up to about 0.1 ${\mu}m$ grain diameter, but the proof stress of ultra-fine grained silver with grain diameters of less than 0.1 ${\mu}m$ was smaller than the value expected from the Petch's relation.

• Ceramist
• /
• v.23 no.2
• /
• pp.211-230
• /
• 2020

Perovskite-type oxides with the nominal composition of ABO₃ can exsolve the B-site transition metal upon the controlled reduction. In this exsolution process, the transition metal emerges from the oxide lattice and migrates to the surface at which it forms catalytically active nanoparticles. The exsolved nanoparticles can recover back to the bulk lattice under oxidation treatment. This unique regeneration character by the redox treatment provides uniformly dispersed noble metal nanoparticles. Therefore, the conventional problem of traditional impregnated metal/support, i.e., sintering during reaction, can be effectively avoided by using the exsolution phenomenon. In this regard, the catalysts using the exsolution strategy have been well studied for a wide range of applications in energy conversion and storage devices such as solid oxide fuel cells and electrolysis cells (SOFCs and SOECs) because of its high thermal and chemical stability. On the other hand, although this exsolution strategy can also be applied to gas phase reaction catalysts, it has seldomly been reviewed. Here, we thus review recent applications of the exsolution catalysts to the gas phase reactions from the aspects of experimental measurements, where various functions of the exsolved particles were utilized. We also review non-perovskite type metal oxides that might have exolution phenomenon to provide more possibilities to develop higher efficient catalysts.

• Preventive Nutrition and Food Science
• /
• v.3 no.2
• /
• pp.143-151
• /
• 1998

Protein -surfactant interactions have been investigate by measuring ζ-potential of $\beta$-lactoglobulin-coated emulsion droplets and $\beta$-lactoglobulin in solution in the rpesenceof surfactant, with particular emphasis on the effect of protein heat treatment(7$0^{\circ}C$, 30min). When ionic surfactant (SDS or DATEM) is added to the protein solution, the ζ-potential of the mixture is found to increase with increasing surfactant concentration, indicating surfactant binding to the protein molecules. For heat-denatured protein,it has been observed that the ζ-potential tends to be lower than that of the native protein. The effect of surfactant on emulsions is rather complicated .With SDS, small amounts of surfactant addition induce a sharp increase in zeta potential arising from the specific interaction of surfactant with protein. With further surfacant addition, there is a gradual reductio in the ζ-potential, presumably caused by the displacement of adsorped protein (and protein-surfactant complex) from the emulsion droplet surfac by the excess of SDS molecules. At even higher surfactant concentrations, the measured zeta potential appears to increase slightly, possibly due to the formation of a surfactant measured zeta potential appears to increase slightly, possibly due to the formation of surfactant micellar structure at the oil droplet surface. This behaviour contrastswith the results of the corresponding systems containing the anionic emulsifier DATEM, in which the ζ-potential of the system is found to increase continuously with R, particularly at very low surfactant concentration. Overall, such behaviour is consisten with a combination of complexation and competitive displacement between surfactant and protein occurring at the oil-water interface. In addition, it has also been found that above the CMC, there is a time-dependent increase in the negative ζ-potential of emulsion droplets in solutions of SDS, possibly due to the solublization of oil droplets into surfactant micelles in the aqueous bulk phase.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.4
• /
• pp.293-300
• /
• 2021

Recently, various researches have been studied, such as water treatment, water reuse, and seawater desalination using CDI (Capacitive deionization) technology. Also, applications like MCDI (Membrane capacitive deionization), FCDI (Flow-capacitive deionization), and hybrid CDI have been actively studied. This study tried to investigate various factors by an experiment on the TDS (Total dissolved solids) removal characteristics using MCDI module in aqueous solution. As a result of the TDS concentration of feed water from 500 to 2,000 mg/L, the MCDI cell broke through faster when the higher TDS concentration. In the case of TDS concentration according to the various flow rate, 100 mL/min was stable. In addition, there was no significant difference in the desorption efficiency according to the TDS concentration and method of backwash water used for desorption. As a result of using concentrated water for desorption, stable adsorption efficiency was shown. In the case of the MCDI module, the ions of the bulk solution which is escaped from the MCDI cell to the spacer during the desorption process are more important than the concentration of ions during desorption. Therefore, the MCDI process can get a larger amount of treated water than the CDI process. Also, prepare a plan that can be operated insensitive to the TDS concentration of backwash water for desorption.

• BMB Reports
• /
• v.55 no.6
• /
• pp.267-274
• /
• 2022

Molecular imaging is used to improve the disease diagnosis, prognosis, monitoring of treatment in living subjects. Numerous molecular targets have been developed for various cellular and molecular processes in genetic, metabolic, proteomic, and cellular biologic level. Molecular imaging modalities such as Optical Imaging, Magnetic Resonance Imaging (MRI), Positron Emission Tomography (PET), Single Photon Emission Computed Tomography (SPECT), and Computed Tomography (CT) can be used to visualize anatomic, genetic, biochemical, and physiologic changes in vivo. For in vivo cell imaging, certain cells such as cancer cells, immune cells, stem cells could be labeled by direct and indirect labeling methods to monitor cell migration, cell activity, and cell effects in cell-based therapy. In case of cancer, it could be used to investigate biological processes such as cancer metastasis and to analyze the drug treatment process. In addition, transplanted stem cells and immune cells in cell-based therapy could be visualized and tracked to confirm the fate, activity, and function of cells. In conventional molecular imaging, cells can be monitored in vivo in bulk non-invasively with optical imaging, MRI, PET, and SPECT imaging. However, single cell imaging in vivo has been a great challenge due to an extremely high sensitive detection of single cell. Recently, there has been great attention for in vivo single cell imaging due to the development of single cell study. In vivo single imaging could analyze the survival or death, movement direction, and characteristics of a single cell in live subjects. In this article, we reviewed basic principle of in vivo molecular imaging and introduced recent studies for in vivo single cell imaging based on the concept of in vivo molecular imaging.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.353-357
• /
• 2023

This study evaluated the effect of lignin biochar on Kimchi cabbage cultivation in an upland field. Each of the inorganic fertilizers (IF, applied at 32-7.8-19.8 kg/10a=N-P-K), lignin biochar (LBC, applied at 1,000 kg/10a), improved LBC (LBC+N, applied at 1,000 kg/10a), and LBC+IF treatments areas were separated by a control (Cn) treatment area. The fresh weight of Kimchi cabbage increased in the order LBC+N > IF > LBC+IF > Cn > LBC treatments, and the length and width of the leaf were ranged from 20.8-25.7 and 13.7-15.8 cm/plant in all treatments. After Kimchi cabbage harvesting in the LBC+N treatment, soil quality improved bulk density, pH, OM, TN, and Av-P₂O₅ than those other treatments. In addition, the total N₂O flux in LBC+N LBC+N was lower than in IF treatments. Therefore, improved lignin biochar application effectively improves Kimchi cabbage cultivation and can benefit the agricultural environment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.392-406
• /
• 1985

The soil management practices before transplanting the ginseng plant were studied with two organic matter sources such as a traditional organic matter (wild grass) and commercial organic fertilizer (byproducts of amino acid fermantation) during the late spring to late autumn. During the soil management practices, the soil received 40kg N/10a from five different combination treatments with above two organic matter sources, a wild grass and a commercial organic fertilizer. After the application of the treatments, the soil were ploughed regularly at the interval of 20 days and the changes of physicochemical properties during the soil management practices were investigated. The next year after soil management practices, ginseng plants were transplanted to each treatment, growth and the content of some organic components of ginseng plant were measured for comparision of the different treatments. 1. The decrease in bulk density observed during the first 40 days of management was considered to be the effect of the improved physical conditions caused by ploughing, The decrease in bulk density observed after 40 days of management was considered to be the effect of organic matter. Similar results were observed in particle density, however porosity increased with time. 2. Soil pH tended to decrease during the first 40 days of management, after which period the pH increased and was stabilized. However, CEC increased with organic matter treatment and the exchangeable $NH^+_4-N$ and $NO^-_3-N$ increased in 20 and 40 days after the management practices, respectively, and after that period it became steady. 3. The decomposition rate of treated organic matter was measured by the incubation test in laboratory conditions. The rate of decomposition was rapid during the first 20 days of management, after which period it showed slight changes. 4. The weight of ginseng root significantly increased in the treatment of 10kg N/10a organic fertilizer and 30kg N/10a wild grass. 5. The saponin content of ginseng root was highest in the 40kg N/10a wild grass treatment. The addition of organic fertilizer at the rate of more than 20kg N/10a caused the decrease in the saponin content.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1230-1236
• /
• 2012

To verify that the electrokinetic remediation is effective for decreasing salinity of fields of the plastic-film house, field tests for physical property, chemical property, and crop productivity of soils have been conducted. The abridged result of those tests is as follows. In the EK treatment, the electrokinetic remediation has been treated at the constant voltage (about 0.8 V $cm^{-1}$) for fields of the farm household. At this time, an alternating current (AC) 220 V of the farm household was transformed a direct current. The HSCI (High Silicon Cast Iron) that the length of the stick for a cation is 20cm, and the Fe Plate for an anion have been spread out on the ground. As the PVC pipe that is 10 cm in diameter was laid in the bottom of soils, cations descend on the cathode were discharged together. For soil physical properties according to the EK treatment, the destruction effect of soil aggregate was large, and the infiltration rate of water was increased. However, variations of bulk density and porosity were not considerable. Meanwhile, in chemical properties of soils, principal ions of such as EC, $NO_3{^-}$-N, $K^+$, and $Na^+$ were better rapidly reduced in the EK treated control plot than in the untreated control plot. And properties such as pH, $P_2O_5$ and $Ca^{2+}$ had a small impact on the EK. For cropping season of crop cultivation according to the EK treatment, decreasing rates of chemical properties of soils were as follows; $NO_3{^-}$-N 78.3% > $K^+$ 72.3% > EC 71.6% $$\geq_-$$ $Na^+$ 71.5% > $Mg^{2+}$ 36.8%. As results of comparing the experimental plot that EK was treated before crop cultivation with it that EK was treated during crop cultivation, the decreasing effect of chemical properties was higher in the case that EK was treated during crop cultivation. After the EK treatment, treatment effects were distinct for $NO_3{^-}$-N and EC that a decrease of nutrients is clear. However, because the lasting effect of decreasing salinity were not distinct for the single EK treatment, fertilization for soil testing was desirable carrying on testing for chemical properties of soils after EK treatments more than two times. In the growth of cabbages according to the EK treatment, the rate of yield increase was 225.5% for the primary treatment, 181.0% for the secondary treatment, and 124.2% for third treatment compared with the untreated control plot. The yield was increased by a factor of 130.0% for the hot pepper at the primary treatment (Apr. 2011), 248.1% for the lettuce at the secondary treatment (Nov.2011), and 125.4% for the young radish at the third treatment (Jul. 2012). In conclusion, the effect of yield increase was accepted officially for all announced crops.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.4
• /
• pp.81-88
• /
• 2001

This experiment was carried out to evaluate the effect of residual food compost application on plant growth and physicochemical properties of soil when residual food compost made from the composting process as part of organic waste recycling was applied in soil as variable rate. The treatments were composed non-fertilizer treatment, control treatment applied with pig compost $20Mg(D.W.)ha^{-1}$, and residual food compost treatments each of applied with 20, 40, 60, $80Mg(D.W.)ha^{-1}$ and were randomized complete block design with three replication. Soil pH after experiment was more increased as more increase application of residual food compost. Other chemical properties of soil including EC were also showed the similar results. The plant growth in treatments applied much of residual food compost at the early growth stage was very damaged and these results were proved at the first growth measurement. Production of the red pepper especially reduced in treatments taken growth demage at the early stage and that of $20Mgha^{-1}$ treatment almost same as control treatment. Bulk density was reduced but porosity was increased according to increase of residual food compost application. Considering the reduction of red pepper production and the demage of growth at the early stage by plenty of salt and water soluble application volume of residual food compost was not permitted over of $30Mgha^{-1}$. Additively, to settle the application volume of residual food compost and to evaluate the plant growth and changes of physicochemical properties of soil, the results taken from continual applying is concluded more important than single application.