• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.46-50
• /
• 1997

This study was conducted to find out the main soil physical properties to control the soil hardness in tamped condition. Sandy loam soil was taken and fill it up to wood cubes and then differently trampling experimental cubic lots which were mulched with various materials, such as, leaves, wood plates and bricks. Soil physical properties were measured 2" core and samples were taken at 250 sites with soil hardness. There were highly significant positive correlations between soil hardness and bulk density, and between bulk density and water content. Negative correlations were found between soil hardness and water content, and between soil hardness and gravel content. The correlation coefficients were increased by multiple correlation between soil hardness, bulk density, volumetric water and gravel content. Bulk density was the main factor to control the hardness, and volumetric water and gravel contents were less effected to soil hardness.

• Journal of Forest and Environmental Science
• /
• v.24 no.1
• /
• pp.35-39
• /
• 2008

The present study was conducted to analyze the soil environment of planted areas around Sudokwon Landfill Site, and drew conclusions as follows. Among the physical properties of soil, bulk density ranged between 1.11~1.59 $g{\cdot}cm^{-3}$, which was higher than the average bulk density (1.05 $g{\cdot}cm^{-3}$) of the B layer of forest soil in Gyeonggido, Korea. This is probably because of treading by heavy equipment used to prepare the ground for planting, and measures should be taken to improve bulk density for the growth of the root system of trees. Among the chemical properties of soils, the organic matter content was only 1/5~1/10 of 30 $g{\cdot}kg^{-1}$, the adequate level for landscape planting. In addition, cation exchange capacity (CEC) ranged between 1~3 $cmol{\cdot}kg^{-1}$, which was much lower than 6 $cmol{\cdot}kg^{-1}$, the least capacity for landscape planting. Therefore, these problems need to be solved.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.1
• /
• pp.93-97
• /
• 2012

This study was conducted to evaluate the efficiency of various inorganic and organic materials to improve physical properties of soil. Saline sodic soil (saturation percentage = 40.36%, $EC_e=5.15dS\;m^{-1}$, $pH_s=8.70$, $SAR=18.84(m\;mol\;L^{-1})^{1/2}$, bulk density =$1.49Mg\;m^{-3}$) was collected, brought to wire house and filled in pots after laboratory analysis for various parameters. Different sources of organic nutrients like farm manure (FM), press mud, compost, poultry manure and sesbania green manure were analyzed for their chemical composition. The experiment comprised of 12 treatments replicated thrice; $T_1$: control (recommended NPK), $T_2:{\frac{1}{2}}$ recommended NPK, $T_3$: FM at 1.5% by soil weight, $T_4$: pressmud at 1.5% by soil weight, $T_5$: compost at 1.5% by soil weight, $T_6$: poultry manure at 1.5% by soil weight, $T_7$: sesbania green manure at 1.5% by soil weight, $T_8:T_2$ + FM at 0.75% by soil weight, $T_9:T_2$ + pressmud at 0.75% by soil weight, $T_{10}:T_2$ + compost at 0.75% by soil weight, $T_{11}:T_2$ + poultry manure at 0.75% by soil weight, $T_{12}:T_2$ + sesbania green manure at 0.75% by soil weight. These treatments were applied using completely randomized (CR) design and appropriate time was given to decompose these organic nutritional sources. Seeds of wheat cultivar Sahar-2006 were sown. After harvesting the wheat, soil samples were collected from each pot and analyzed for various physical properties like bulk density, porosity and saturation percentage. An improvement in physical properties (bulk density, porosity and saturation percentage) of soil was noticed with the application of various organic nutritional sources but role of compost alone ($T_5$) remained prominent.

• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.3
• /
• pp.155-159
• /
• 1993

This study was initiated to obtain the scientific information for the improvement of paddy soil. Mean values and mutual relationships of bulk density, pH values and the content of organic matter were investigated at the 124 field sites shown to be nationwide high-yielding, young seedling field s and their neighboring fields under the different soil textures and depths. The soil samples were collected and those samples were analyzed in the laboratory of Agricultural Sciences Institute. Mean values among the different soil textures and depths were estimated with loam-textured. Bulk density were significantly correlated with sand and silt in topsoil, and that were appeared to be correlated to sand, silt + clay, pH and content of organic matter highly significant in 1% level. Regression equation of soil bulk density(Y) to clay(C), orgnic matter (OM) and content of silt + clay(S+C) were as follows for the topsoil, Y=1.365+0.006C-0.003(S+C)~0.034OM (R=0.067*), and for the subsoil, Y=1.548 -0.002C-0.0007 (S+C) -0.036OM (R=0.122**).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.34-40
• /
• 2011

The bulk density, water absorption and microstructure of the artificial aggregates were controlled as a function of sintering temperature (1100 and $1200^{\circ}C$) and time (10~60 min) in the fabrication process of the artificial aggregates by the direct sintering process using dredged soil, the inorganic wastes. Also, the physical properties of the artificial aggregates fabricated according to the different sintering methods such as the direct sintering method used in this study and the increasing temperature sintering method used in the previous report, were compared and analysed. The bulk density of aggregates sintered at $1200^{\circ}C$ by the direct sintering method showed below 1.0, and the thickness of a shell and the pore size of the black core were increased with sintering temperature. Also, in the same sintering temperature, the area of black core was decreased, the thickness of shell was increased and the water absorption was decreased with sintering time. The black core of artificial aggregates of bulk density below 1.0 had the similar microstructure, regardless of sintering methods. In contrast, the shell of aggregates fabricated by the increasing temperature sintering method showed more dense microstructure than that by direct sintering method, hence the water absorption of aggregate sintered using direct sintering was relatively high. Thus, the direct sintering method is suitable for fabrication of artificial aggregates in ceramic carriers or absorbents applications.

• Journal of Korea Soil Environment Society
• /
• v.3 no.2
• /
• pp.61-70
• /
• 1998

This research has been made for influence of forest environmental changes, such as tree-clearcutting affecting to soil chemical and physical properties, on water storage capacity at forest fire land in Keumsan, Chungnam. The analyzed factors were bulk density, porosity, field moisture saturated hydraulic conductivity air permeability and organic matter content, Field moisture saturated hydraulic conductivity and air permeability at uncutting sites were higher than those at clearcutting sites, especially the most differences were appeared at lower slope. After 2 years passed since forest fire, the most changeable parts of soil characteristics were 5-l5cm depth below soil surface. Total Porosity, coarse pore and fine pore at uncutting sites were higher than those at clearcutting sites. Also, as soil depth increased, total porosity and coarse pore were decreased. Bulk density at uncutting sites was lower than that at clearcutting sites, and was decreased as soil depth increased. The order of the change trend in field moisture saturated hydraulic conductivity, air permeability and porosity was slope lower>middle>upper. Organic matter content at uncutting sites were higher than those at clearcutting sites, and decreased as soil depth increased. As soil depth increased, bulk density had the positive correlation, in other hand, porosity, coarse pore, field moisture saturated hydraulic conductivity, air permeability and organic matter content had the negative correlation. It was concluded that forest environmental changes by forest fire degrade soil physical and chemical properties.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.105-113
• /
• 2010

To investigate the restoration procedure on soil physical properties at the surface of visiting road affected by rest-year system. This study was carried out at visiting roads of stream of Chilsun in Jirisan. Mean soil strength in 20cm of soil depth was lower in the Rest-Year System areas (1.5-1.9 times in Site 2, 1.1-7.5 times in Site 3) than in the control (Site 1). Soil strength was recovered by the Rest-Year System in the national park. Mesopore rate (pF 2.7) in 0-15 cm of soil depth was higher in the Rest-Year System areas (1.2 times) than in the control. This indicates that mesopore rate is rapidly restoring in the Rest-Year System areas. Pore space rate in 0-7.5 cm of soil depth was higher in the Rest-Year System areas (23.2% in Site 2, 23.6% in Site 3) than in the control (22.4% in Site 1). Pore space rate in 7.5-15 cm of soil depth was also higher in the Rest-Year System areas (22.9% in Site 2 and Site 3) than in the control (18.9% in Site 1). Soil pore space was remediable by the Rest-Year System. Bulk density in 0-7.5 cm of soil depth was lower in the Rest-Year System areas (1.674g/$cm^3$ in Site 2, 1.668g/$cm^3$ in Site 3) than in the control (1.723g/$cm^3$ in Site 1). Bulk density in 7.5-15 cm of soil depth was lower in the Rest-Year System areas (1.785g/$cm^3$ in Site 2 and 1.721g/$cm^3$ in Site 3) than in the control (1.721g/$cm^3$ in Site 1). Soil bulk density was decreased in the Rest-Year System areas of the national park. Amount of soil erosion was lower in the Rest-Year System areas ($0.017m^3$/km/yr in site 2, $0.023m^3$/km/yr in site 3) than in the control ($0.054m^3$/km/yr in site 1).

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.391-396
• /
• 2010

To analyze the characteristics of canopy fuel in Pinus densiflora stand, which is essential to assess the crown fire hazard, allometric equations for estimation of crown fuel biomass were developed by subjectively categorized crown fuel component and crown bulk density was analyzed by available fuel component categories. Ten trees were destructively sampled at Pinus densiflora stand in Mt. Palgong in Daegu and their crown fuels were weighed separately for each fuel category by size classes and by living and dead. Regression equations that estimate crown fuel load by diameter at breast height(D) or additional total height(H) were derived. The adjusted coefficient of determination values were the highest (${R^2}_{adj}$=0.835-0.996) and standard error of estimate were the lowest (SEE=0.074-0.638) in the allometric equation lnWt=${\alpha}+{\beta}lnD+{\gamma}lnH$ in average. However, in needles and small branches categories, the differences in ${R^2}_{adj}$ and SEE between equations were not significant. Crown bulk density (CBD), which was calculated by crown fuel load divided by crown volume, was 0.067 kg/$m^3$ in average when only needles were considered as available crown fuel and 0.097 kg/$m^3$ when needles and branches (0-0.5 cm diameter) were considered. The increments of CBD of needles and small branches were little even when diameter at breast height increased.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.110-121
• /
• 2021

The importance of tidal flats lost due to industrialization has recently received attention, and attention is being paid to the creation of artificial tidal flats and maintenance of natural tidal flats. However, there is still a lack of understanding about the behavioral characteristics of mud, mud, and sand that form tidal flats. Although research on the movement characteristics of mixed soils such as tidal flats has been conducted through field investigations and hydraulic experiments, interest in developing a numerical model based on these results has not yet reached. In this paper, the purpose of this paper is to establish a mixed soil model that can efficiently manage the low quality of the tidal flats. In constructing a model for reproducing the surface movement of mixed soil, the numerical stability of the reproduction and movement of sand and mud constituting the mixed soil in the numerical model should be considered first, so first, the volume of sand and mud constituting the mixed soil A mixed soil model representing the relationship was proposed based on a topographical diagram representing the geometric structure of the mixed soil. In order to consider the dry bulk density of the mixed soil, it was possible to consider the dry bulk density of the mud by introducing the water content of the mud containing water. In addition, it was confirmed that the mud and sand movement calculation according to the slope collapse of the mixed soil was stably performed through the calculation of the slope collapse of the mixed soil through the numerical analysis model to which the proposed mixed soil model was applied.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.359-366
• /
• 2011

The objective of this study was to analyze the changes of crown fire hazard possibility from the effects of forest tending works (FTW) in Pinus densiflora stands in Korea. The study sites were located in Youngju (FTW) and Bonghwa (Control) areas. Ten representative sample trees were destructively felled at each areas to analyze the crown fuel characteristics. The results of this study showed that crown fuel moisture content in Youngju and Bonghwa areas were 103.6% and 104.4%, respectively. The needles and twigs with less than 1cm diameter accounted 50.3% of the total crown fuel load in Youngju area and 62.0% in Bonghwa area. On the other hand, it was observed in Youngju that the canopy bulk density was $0.11kg/m^3$ lower but have 1.3 m higher average canopy base height therefore having a possibility of lower crown fire hazard as compared to Bonghwa that had higher canopy bulk density and lower canopy base height.