• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.20.2-20.2
• /
• 2011

BMNO dielectric materials with a pyrochlore structure have been chosen and they have quite high dielectric constants about 210 for the bulk material. In the case of thin films, 200-nm-thick BMNO films deposited at room temperature showed a low leakage current density of about $10^{-8}\;A/cm^2$ at 3 V and a dielectric constant of about 45 at 100 kHz. Because high dielectric constant BMNO thin films kept an amorphous phase at a high temperature above $900^{\circ}C$. High dielectric constant BMNO thin films grown at room temperature have many applications for flexible electronic devices. However, because the dielectric constant of the BMNO films deposited at room temperature is still low, percolative BMNO films (i.e., those were grown in a pure argon atmosphere) sandwiched between ultra-thin BMNO films grown in an oxygen and argon mixture have greater dielectric constants than standard BMNO films. However, they still showed a leakage problem at a high voltage application. Accordingly, a new nano-structure that uses BMNO was required to construct the films with a dielectric constant higher than that of its bulk material. The fundamental reason that the BMNO-Bi nano-composite films grown by RF-Sputtering deposition had a dielectric constant higher than that of the bulk material was addressed in the present study. Also we used the graphene as bottom electrode instead of the Cu bottom electrode. At first, we got the high leakage current density value relatively. but through this experiment, we could get improved leakage current density value.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.5
• /
• pp.359-365
• /
• 2004

To study the lipid adsorption characteristic of chitosans with different molecular weights and the degrees of deacetylation, in vitro test and near-infrared (NIR) spectroscopic analysis have been performed for the measurement of lipid adsorption characteristics of chitosan. The degrees of deacetylation in chitosans were $70{\%},\;85{\%}\;and\;92{\%}$ at different deacetylation times (1 hr, 2 hrs, 3 hrs), respectively. The molecular weight of each chitosan was controlled by enzymatic hydrolysis, and then the molecular weight of the chitosan was 4 kDa. The bulk density, water holding capacity and fat binding capacity of each chitosan powder were $96.2-504.0{\%},\;374.4-1217.9{\%},\;and\;307.0-659.3{\%}$, respectively. The higher molecular weight of chitosan was exhibited the lower bulk density and the higher water and fat binding capacities. Bindinf capacities of chitosan powders to bile salts, cholesterol and linoleic acid were $41.2-63.3{\%},\;40.8-67.4{\%},\;42.6-72.6{\%}$, respectively. In NIR spectrum of lipid adsorbed chitosan the occurrence static eletronical binding between chitosan and lipid was identified by NIR spectrum peak induced from combination of carboxylic group in lipid and amino group in chitosan. In conclusion, the higher degree of deacetylation and molecular weight of chitosan showed the higher lipid binding capacity and the lipid adsorption of chitosan were occurred by combination of carboxylic group in lipids and amino group in chitosan.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.4
• /
• pp.341-346
• /
• 2016

This study was conducted to analyze soil physico-chemical properties of agricultural land composed from the river-bed sediments. We investigated the changes of soil physico-chemical properties at 30 different sampling sites containing paddy, upland and plastic film house from 2012 to 2015. pH, exchangeable calcium and magnesium decreased gradually in paddy soils during the four years, whereas the available $P_2O_5$, exchangeable Ca, Mg and EC increased in upland and plastic film house soil. For the soil physical properties, bulk density and hardness of topsoil were $1.47g\;cm^{-3}$ and 21.5 mm and those of subsoil were $1.71g\;cm^{-3}$ and 25.7 mm in paddy soils. In upland soils, bulk density and hardness of topsoil were $1.48g\;cm^{-3}$ and 15.9 mm and those of subsoil were $1.55g\;cm^{-3}$ and 16.9 mm. In plastic film house soils, bulk density and hardness of topsoil were $1.42g\;cm^{-3}$ and 14.4 mm and those of subsoil were $1.40g\;cm^{-3}$ and 18.5 mm, respectively. The penetration hardness was higher than 3 MPa below soil depth 20 cm, and it is impossible to measure below soil depth 50 cm. As these results, in agricultural anthropogenic soils dredged from river basins, the pH, amount of organic matter and exchangeable cations decreased and soil physical properties also deteriorated with time. Therefore, it is needed to apply more organic matters and suitable amount of fertilizer and improve the soil physical properties by cultivating green manure crops, deep tillage, and reversal of deep soils.

• Korean journal of food and cookery science
• /
• v.29 no.5
• /
• pp.469-478
• /
• 2013

The effects of tapioca starch (TS) and tapioca modified starch (TMS) as additives on the quality characteristics of rice cookies were investigated in this study. The amounts of TS and TMS replaced were 5, 10 and 15%(w/w) based on 100 g of rice flour. At the result of rapid viscosity analyser (RVA) properties of rice flour added with starches, peak, trough, and final viscosity of rice flour added with TMS decreased significantly(p<0.05). Hardness of dough and cookies as measured by Texture analyzer (TA) significantly decreased upon addition of TMS, and hardness of cookies significantly decreased upon addition of TS, hardness of cookies TMS lower than TS. L value of dough and cookies increased upon addition of TMS, whereas a value decreased upon addition of TMS. Spreadability of cookies increased upon addition of TMS, 10% TMS is the highest. Bulk density of dough decreased upon addition of TMS, bulk density of cookies decreased upon addition of TS and TMS, and bulk density of TMS cookie lower than TS cookie. In sensory evaluation, 10% TS added rice cookies showed the highest score in overall acceptability, hardness, brittleness, color, softness, taste and flavor, and 15% TS added rice cookies showed the highest score in appearance. And 15% TMS added rice cookies showed the highest score in overall acceptability, taste, brittleness, flavor, and 10% TMS added rice cookies showed the highest score in hardness, flavor, taste and color. It is indicated that the quality characteristics and sensory characteristics of the rice cookie can be improved by adding TS and TMS.

• Plant Resources
• /
• v.3 no.2
• /
• pp.110-117
• /
• 2000

The recycling method of enokitake cultural waste and the potentiality of second flush for enokitake were determined, because this fungus is not as prolific as the more commonly cultivated white rot fungi in the conversion of sawdust to mycelial mass. The mycelial growth of F. velutipes on several substrates, variously treated with rice bran was promoted at ratios of 10-20% (w/w) on all substrates, but suppressed at above ratios, although some difference was there. The mycelial densities generally increased correlated to the supplementation contents of rice bran. It could be concluded that F. velutipes preferred mild acidic to acidic conditions for mycelial growth, considering that the mycelial growth rate was highest on waste of pH 6.01, treated with 0.1 % Ca(OH)$_2$ and on populus mixed waste of pH 6.02, non treated. The ranges of substrate bulk densities, which was pertinent for mycelial linear growth were from B.D. (g/cc) 0.17 to 0.23 on waste and populus mixed waste all. The pertinent contents of rice bran supplementation in bottle cultivation was from 20 to 30% on waste and 20% on populus mixed waste, considering the requried duration for pinheading and fruiting yields. Standard bulk density for filling and utilizing the waste and populus mixed waste for commercial f. velutipes cultivation were B.D.(g/cc) 0.19 ~ 0.23, and 0.23~ 0.25, which could be conversed to 510~ 540g/900m1 and 520~ 570g/900m1, respectively, The second flush of F. velutipes was tried and the re-inoculation by sawdust and liquid spawn showed somewhat good results, indicating the potentiality of second crop and suggesting further research for it.

• 한국환경농학회:학술대회논문집
• /
• 2011.07a
• /
• pp.177-187
• /
• 2011

This study was conducted to determine some physical and chemical properties of the soil and their relationship to spectroscopic-based (visible range) analytical methods while evaluating soil organic matter fractions and soil quality in degraded and non-degraded soils in a wide range of environments. Soil samples were collected from the different landscape positions of cultivated and noncultivated soils, and the latter from the same landscape positions but with different vegetation, at Songco, Lantapan, Bukidnon. The physical and chemical properties of the soils were determined at the SPAL, CMU, Musuan, Bukidnon while the metagenomic properties were determined at the Laboratory of the University of Missourri, Missourri, USA. Bulk density and air dry soil strength values of the soils from the cultivated areas were generally higher than those of the uncultivated areas. Also, soils at the summit generally had lower bulk density and soil strength values than the other landscape positions. Moreover, soils planted to camote (Ipomoea batatas) had higher bulk density and soil strength values compared to soils grown to pepper under the trees. Exchangeable calcium (Ca), magnesium (Mg), and potassium (K) and cation exchange capacity (CEC) of the soils were generally higher in uncultivated areas than those of the cultivated areas. A similar trend was observed for the potassium permanganate ($KMnO_4$)-oxidizable organic C contents determined by spectroscopic method and the total C contents determined by the Walkley-Black method. The $KMnO_4$-oxidizable organic C contents determined by spectroscopic method and the total C contents determined by the Walkley-Black method were closely related ($r=0.631^{**}$). Hence, the former method shows promise in assessing soil quality as it is a rapid test, relatively low cost and can be distributed as a field kit either with a portable spectrometer or with a color chart.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.185-191
• /
• 1999

An air-conditioning system based on the chemical heat storage principle was considered. $H_2O$ was chosen as the reaction gas and the working fluid as well. Na$_2$S, CaCl$_2$, MnCl$_2$, BaCl$_2$, MgCl$_2$, Fe$_2$(SO$_4$)$_3$ and MnSO$_4$ were tested as the solid reactants by using Cahn pressure balance. Na$_2$S was superior to other salts in respect of high capability of absorption of water gas, 5 moles of $H_2O$ per unit mole of Na$_2$S, and adequate temperature of adsorption, $65^{\circ}C$ at 7torr, and of desorption, 13$0^{\circ}C$ at 76torr. Clausius-Clapeyron diagram of Na$_2$S was obtained via adsorption experiments at several vapor pressures of water gas. To enhance heat and mass transfer characteristics, usually below 1W/m K, of the reactor bed of general adsorption systems, expanded graphite block was adapted as the support of Na$_2$S salt. Expanded graphite blocks had thermal conductivity values of 20~80W/mK with respect to 100~400kg/㎥ of block bulk density. Permeability values of expanded graphite blocks were 10$^{-13}$ ~ 10$^{-14}$ $m^2$ with respect to 100~300kg/㎥ of block bulk density showing highly decreasing values of permeability, below 10$^{-l4}$$m^2$, in the range of above 150kg/㎥ of block bulk density.y.

• Korean Journal of Agricultural Science
• /
• v.49 no.2
• /
• pp.239-247
• /
• 2022

The physico-chemical properties of agricultural soil are factors that affect crop productivity and soil fertility. In Korea, agricultural environment change surveys have been conducted every four years since 1999. The purpose of this study is to investigate the status and changes in the physico-chemical properties of agricultural soil in Chungcheongnam-do. Samples were collected from the exact location of the aforementioned environment survey, and environmental variables (land use, type of crop cultivated) were investigated in relation to the samples. Soil collection was conducted using a core sampler and a single gouge auger. The bulk density of the soil generally increased up to a depth of sampling of 40 cm but decreased thereafter to a depth of 60 cm. Additionally, the bulk density was highest in the upland soil case and stood at 1.59 g·cm^-3, while the lowest value of 1.52 g·cm^-3 was obtained from orchard soil samples. Conversely, the porosity and moisture gradually decreased at soil depths of 0 - 40 cm and increased at depths of 40 - 60 cm. Most of the soil chemical properties generally decreased with an increase the soil depth from 0 to 70 cm, but electrical conductivity (EC) increased up to a depth of 40 cm. Therefore, it is judged that it is necessary to lower the bulk density by supplying organic matter for agricultural land in Chungcheongnam-do.

• The Korean Journal of Ecology
• /
• v.16 no.2
• /
• pp.229-238
• /
• 1993

Ecological role of earthworms in red pine forest was investigated with emphasis on the population size, cast production and changes of physicoKDICical properties of soil by earthworm's activities. The density of earthworms was 62.8/m2 in August, 1992. Average biomass of earthworms was 16.3 g/m2. N and P concentrations in the tissue of earthworms were 28.5 mgN/g and 0.5 mgP/g, respectively. Cast production continued from April to November, with a peak in August. Annual production of earthworm casts was 5,379 g/m2. Bulk density of surface soil decreased due to the earthworm's cast-forming activity. Clay fraction in surface soil increased by addition of casts. Soil KDICical properties were significantly different between the surface soil and the earthworm casts. The amounts of organic matter, N, P, K, Ca and Mg added to the soil via earthworm casts during one year were 9.3t/ha, 11.29 kg/ha, 0.78 kg/ha, 12.36 kg/ha, 140.29 kg/ha and 20.96 kg/ha, respectively. Earthworms can feed on waxy and resinous litter when it became palatable by decomposing processes.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.1-9
• /
• 2015

Wood fibers for medium density fiberboard (MDF) was used in the filler layer of the white duplex board for increasing thickness and bulk of the board. The MDF fibers were treated with ozone (3% based on dry weight of the fibers), and mixed together with OCC (old corrugated container) to form paper. Ozone-treated MDF fibers gave high bulk, high tensile strength, high internal bond and fast drainage to the furnish mixed with OCC. It was shown that there were possibilities to reduced basis weight of the filler layer without loss of thickness, stiffness, and tensile strength. Furthermore, it showed the possibility to develop a new kind of board product that has high stiffness as well as high strength properties with light basis weight by application of the ozone-treated MDF fibers.