• Korea-Australia Rheology Journal
• /
• v.18 no.3
• /
• pp.127-131
• /
• 2006

Few investigations of bread dough compressibility have been reported in the literature, despite the fact that high compression stresses are often reached in processing. Here we report some experiments on the compressibility of an Australian wheat bread dough under compressive stresses up to 5 MPa, and show that the results are consistent with a mathematical model of bread dough containing entrained air. The implications for tensile testing are also considered.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.11
• /
• pp.841-848
• /
• 2008

DME(Di-methyl Ether) has been expected to be one of the promising alternative fuels for compression ignition engines due to its low emission characteristics for particulate matter. However, its physical properties such as density, bulk modulus and viscosity are not comparable to those of conventional diesel fuel. Especially, problems caused by low lubricity and high compressibility need to be understood more thoroughly, when a DME fuel is used for compression ignition engine, especially with mechanical fuel supply system. In this study, measurement and calculation of DME's bulk modulus were carried out over the range of temperatures from $-3^{\circ}C$ to $53^{\circ}C$, and pressures from 50 bar to 250 bar using an experimental apparatus built in this work. The results show that DME is prone to be compressed more easily compared to diesel fuel. A comparison of bulk modulus with butane and propane were also made in this work.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.179-184
• /
• 2003

It has been recognized that the compressibility of hydraulic fluid, which is characterized by the value of its bulk modulus, heavily affects on the system behavior and performance. In practice, the value of the oil bulk modulus varies by the operational and structural characteristics of the hydraulic system. This study presents the theoretical derivation of the effective bulk modulus and describes an experimental impulse technique that allows accurate measurement of oil effective bulk modulus with pressure variation in a hydraulic system. Experimental and analytical results show that the value of the effective bulk modulus varies a lot in low pressure region by the effect of entrained air, while the effective bulk modulus can be estimated just using the oil and container bulk modulus on the other high pressure region.

• Applied Biological Chemistry
• /
• v.36 no.6
• /
• pp.416-423
• /
• 1993

Milk powders were made by several drying methods and raw materials, and rheological properties of milk powders were investigated by an Instron Universial Testing Machine. The results obtained are summarised as follows. Bulk density of the drum dried whole milk powder was $0.382\;g/cm^3$ and was higher than that of other milk powders. The Hausner ratio, angle of repose and compressibility of the spray dried skim milk powder were 1.127, $32.5^{\circ}$ and 0.029 respectively. This result indicated that skim milk powder showed free flowing characterristics. The compressibility of the drum dried whole milk powder was decreased by the decrease of moisture content. Compressibility of the milk granule was 0.056 and was lower than that of milk powder. The spray dried milk powder of a grobular shape had higher solidity than the freeze or drum dried milk powder. The drum dried milk powder particles consist of irregular shape.

• YAKHAK HOEJI
• /
• v.42 no.3
• /
• pp.284-289
• /
• 1998

The effect of reaction condition, solvent addition and thermal treatment on the bulk density, crystallinity and chemical properties of the freeze-dried cefazohn sodium was inves tigated to prepare the cefazolin sodium powder for injection with good flowability. Crystalline cefazolin sodium powder with high untapped-bulk density (about 45%) and low compressibility (about 40%) was obtained by solvent addition to the very highly concentrated cefazohn sodium solution followed by subsequent thermal treatment before freeze-drying. The desirable solvent was low substituted alcohol such as isopropyl alcohol and anhydrous ethanol with the final concentration of about 9%. The pH adjustment and nitrogen gas purging during the reaction did not give significant effect on the chemical properties such as content, color, transmittance and pH of the reconstituted cefazolin sodium aqueous solution.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.5
• /
• pp.740-745
• /
• 2002

The current study was conducted to identify the differences in the rheological properties of Chlorella sp. powder cultured in a fermentor and in a pond-like environment. Cells. cultured in the same media were harvested and spray dried. The biomass yield from the fermentor culture was 4.7% (dry basis), while that from the pond was 4.3% (dry basis). Measurements of the loose bulk density, tapping test, Hausner's ratio, and compressibility test all revealed differences between the rheological properties of the Chlorella sp. from the two cultivation systems. Although both the fermentor and pond cultured Chlorella sp. showed the same angle of repose, the mean size of the cells was 2.26 $\mu\textrm{m}$ and 2.89 $\mu\textrm{m}$, respectively. The weight of the Chlorella sp. tablets cultured in the fermentor and pond was 0.663 g/tablet and 0.593 g/tablet, respectively, while the friability of the tablets was 21% and 41%, respectively. Observation by Transmission Electron Microscope (TEM) showed that the cell wall of the Chlorella sp. cultured in the fermentor was thinner and more spherical than that cultured in the pond, thereby providing the main characteristic rheological properties of the powder.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.143-150
• /
• 2003

전분 완충재의 물리적, 기계적 특성을 개선하기 위한 노력들이 많이 이루어지고 있지만 기존의 플라스틱 완충재와 비교하면 더 많은 노력이 요구되어진다. 그래서 본 연구에서는 전분 완충재의 물리적 기계적 특성에 대한 유연제(plasticizers)와 첨가제(additives)의 영향을 규명하였다. 전분과 합성수지 그리고 여러 유연제 또는 첨가제를 혼합한 뒤 Brabender사의 일축 압출기를 이용하여 여러 축속도(60~120 rpm)에서 압출 가공한 후 물리적, 기계적 특성을 조사하였다. 전분 완충재의 밀도(bulk density)와 압축성(bulk compressibility)은 혼합물에서 물의 비율이 증가함에 따라 증가하였지만, 복원성(bulk resiliency)은 조금 감소하였다. 측정되어진 전분 완충재의 특성은 변형전분(hydroxypropylated starch)의 사용으로 향상되었다. 또한, glycerol, glycerol monostearate 그리고 alkylglucosides의 첨가도 전분 완충재의 밀도와 압축성을 증가시켰다. 염화철(II) 0.5%을 포함한 전분 완충재는 첨가제를 포함하지 않은 전분 완충재에 비하여 밀도 42%와 압축성 58%가 각각 감소한 반면, 복원성은 13%포인트 증가하였다. 변형전분과 염화철(II)이 첨가된 전분 완충재는 기존의 플라스틱 완충재에 비하여 밀도와 압축성은 떨어지지만, 대체 사용되어질 수 있는 것으로 판단되었다.

• Structural Engineering and Mechanics
• /
• v.38 no.3
• /
• pp.361-384
• /
• 2011

Earlier studies on hollow-circular rubber bearings, all of which are conducted for steel-reinforced bearings, indicate that the hole presence not only decreases the compression modulus of the bearing but also increases the maximum shear strain developing in the bearing due to compression, both of which are basic design parameters also for fiber-reinforced rubber bearings. This paper presents analytical solutions to the compression problem of hollow-circular fiber-reinforced rubber bearings. The problem is handled using the most-recent formulation of the "pressure method". The analytical solutions are, then, used to investigate the effects of reinforcement flexibility and hole presence on bearing's compression modulus and maximum shear strain in the bearing in view of four key parameters: (i) reinforcement extensibility, (ii) hole size, (iii) bearing's shape factor and (iv) rubber compressibility. It is shown that the compression stiffness of a hollow-circular fiber-reinforced bearing may decrease considerably as reinforcement flexibility and/or hole size increases particularly if the shape factor of the bearing is high and rubber compressibility is not negligible. Numerical studies also show that the existence of even a very small hole can increase the maximum shear strain in the bearing significantly, which has to be considered in the design of such annular bearings.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.394-397
• /
• 1999

The relation between the paper formation analyzer by image process system and smoothness, compressibility uniform of ink absorption is studied. There results indicate that the paper with bad formation has higher apparent bulk than the paper with good formation. The bad formation of paper results in the nonuniform calendering and decrease of the compressibility. The bad formation of paper also results in deformation and omission of printing dots, which affects the reproduction of the printing images.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.402-406
• /
• 2000

Strain energy function of the isoprene rubber was accurately determined by the experiments of uniaxial tension, planar tension, biaxial tension and volumetric compression. Deformation behavior of alternatively laminated structure of elastomer and reinforced aluminium layers, was analysed by Finite Element method. As a result, Ogden strain energy function obtained from the experiments describes the hyperelastic characteristics of the rubber very well. The compressibility of the rubber reduces axial stiffness of the structure. The axial stiffness of alternatively laminated structure being larger than shear stiffness. Which enables the structure to be shear-deformed easily.