• Journal of the Korean Geosynthetics Society
• /
• v.5 no.1
• /
• pp.15-23
• /
• 2006

Sand Compaction Pile and Stone Column method have been used in widely during several decades as a technique to reinforce soft soils and increasing ultimate bearing capacity, accelerate consolidation settlement of the foundation ground. Stone column method, making a compaction pile using crushed stone, is a soft ground improvement method. However, stone column method is difficult to apply to the ground which is not mobilized enough lateral confine pressure because no bulging failure resistance. Hence, in present study, development the geogrid reinforced stone column system for settlement reduction and wide range of application of stone columns. To develop this system, triaxial compression tests were conducted for evaluation which is about behavior characteristics of stone column on replacement rate and confine pressure. Then, 3-dimensional numerical analysis were evaluated for application of the GRSC (geogrid reinforced stone column) system as evaluate behavior characteristics and settlement reduction effect of stone column reinforced by geogrid on types and reinforcing depth change of geogrid.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.84.2-84.2
• /
• 2011

A numerical simulation study of the solar coronal plasma reveals that a ballooning instability can develop in the course of flux rope merging. When magnetic field lines from different flux ropes reconnect, a new field line connecting farther footpoints is generated. Since the field line length abruptly increases, the field line expands outward. If the plasma beta is low, this expansion takes place more or less evenly over the whole field line. If, on the other hand, the plasma beta is high enough somewhere in this field line, the outward expansion is not even, but is localized as in a bulging balloon. This ballooning section of the magnetic field penetrates out of the overlying field, and eventually the originally underlying field and the overlying field come to interchange their apex positions. This process may explain how a field structure that has stably been confined by an overlying field can occasionally show a localized eruptive behavior.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.23 no.1
• /
• pp.107-113
• /
• 2011

Infection effect of $Nosema$ $bombyics$ on the midgut of silkworm $Bombyx$ $mori$ and subsequent appearance of spores and the performance of larvae was studied. Autopsy of larvae showed white pustules on the surface of midgut at 5 days of post infection (pi). At later stage, important organs like midgut, silk gland and gonads reduced in size and all these organs showed white pustules. Light microscope observation of pustules revealed enormous spores. Spore multiplication was at a faster rate in young larvae. Infection of the adult larvae resulted in pebrinized pupa and moths. Larval weight, cocoon weight and cocoon shell ratio reduced as the post infection period increased. Transverse sections of midgut showed $N.$ $bombycis$ infection limited to a few columnar cells at 3-5 days of pi. At 7 days pi, cell volume increased, cells were swollen and elongated. Heavily infected cells looked like sacks filled with parasite and the apical region of certain cells were bulging into the gut lumen. Later at 8-9 days of pi, spores or its developing stages leaked into the lumen either freely or enclosed within the globules of host cytoplasm. Besides columnar cells, development of $N.$ $bombycis$ was observed in the regenerative cells and rarely in goblet cells. Development of $N.$ $bombycis$ was also observed in both longitudinal and circular muscles at the late pi period. The histopathological changes, deformities and spore production time in the host were all influenced by the spore dosage and age of the host.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.3
• /
• pp.237-240
• /
• 1998

Aneurysmal bone cyst is a benign lesion of bone consisting of a septated, cystic cavity filled with non-endothelium-lined, blood-filled spaces. As it grows, expanding and destroying the affected part of the bone by direct compression, the lesion characteristically produces a prominent bulging of the affected bone, which eventually erodes the overlying cortex. Patients rarely complain of pain unless the cyst affects adjacent nerves or its expasion is great enough to impinge on the surrounding joints and soft tissue. Teeth adjacent to the cyst may be displaced, but usually remain vital. Development of the lesion in the craniofacial region is rare, and the mandible is more often affected than the maxilla. Complete surgical excision is used to treat aneurysmal bone cyst, with either curettage or composite resection. This is a case report of 49 years old female with aneurysmal bone cyst treated with surgical excision & DFDB graft.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.378-383
• /
• 2007

As the Minimally Invasive Surgery (MIS) is developed, an interventional procedure becomes the major of the spine surgery in the world. Despite of the use of the expensive medical equipments, the success chance of the nucleoplasty is about 30%. The reason is that the shape of the cannular needle is similar to that of the conventional injector and looks like the straight. Because the tip of these straight needles is not able to reach in the vicinity of the disc bulging or the protrusion, which are the cause of the low back pain and because the far indirect plasma discharge results in the decompression, the nucleoplasty has the limit. Many incurable diseases has not been solved due to the unexistence of the advanced technique for the MIS human body cannula device. If 3-D direction controllable cannular catheter (whose direction is accurately controlled after inserting into the bodies to cure the lesion) is developed, it is expected that new devised cannular catheter can cure many incurable diseases simultaneously. Therefore, the aims of this research are to develop the new devised cannular catheter of SMA direction controller for the medical situation, which has been produced through many previous trial-error procedures, and to produce the commercial medical device.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.699-704
• /
• 2002

The pipe with a long-neck flange is widely used in power plants, chemical plants, and shipbuilding companies. New the pipe with a long-neck flange is manufactured by welding a thick flange to a pipe. But this long-neck flange pipe has some deflects in the welding region such as unfitting and local thermal fatigue, which weaken the strength around the neck of the flange. Moreover, after welding the flange, the contacting surfaces of the flange have to be machined flat. So, that is uneconomical. Therefore, to solve the above problems of the long-neck flange pipe, a new process, which has no defects around the flange neck, is required. In this study, three forming processes are suggested to get an enhanced long-neck flange. First suggested process consists of conical terming and flange forming. Second and third suggested processes consist of the bulging of a long pipe locally heated by induction coils and the flange forming. The differences between second and third suggestions are the thickness and local heating area of the pipe. That is, the thickness of the initial pipe of third suggestion is larger than that of the final product, and the local heating area is smaller than that of second suggestion. These three suggestions fur forming a long-neck flange are simulated by FE analyses with a commercial cede DEFORM 2D. Especially, the theoretical result of FE analysis on the first suggestion fur forming a long-neck flange is verified by the experiment with aluminum 6063 pipes. From the theoretical and experimental results, it is concluded that three suggested processes are very useful in order to manufacture the pipe with a long-neck flange without any deflects.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.212-219
• /
• 2002

The pipe with a long-neck flange is widely used in power plants, chemical plants, and shipbuilding companies. Now the pipe with a long-neck flange is manufactured by welding a thick flange to a pipe. But this long-neck flange pipe has some defects in the welding region such as unfitting and local thermal fatigue, which weaken the strength around the neck of the flange. Moreover, after welding the flange, the contacting surfaces of the flange have to be machined flat. So, that is uneconomical. Therefore, to solve the above problems of the long-neck flange pipe, a new process, which has no defects around the flange neck, is required. In this study, three forming processes are suggested to get an enhanced long-neck flange. First suggested process consists of conical forming and flange forming. Second and third suggested processes consist of the bulging of a long pipe locally heated by induction coils and the flange forming. The differences between second and third suggestions are the thickness and local heating area of the pipe. That is, the thickness of the initial pipe of third suggestion is larger than that of the final product, and the local heating area is smaller than that of second suggestion. These three suggestions for forming a long-neck flange are simulated by FE analyses with a commercial code DEFORM 2D. Especially, the theoretical result of FE analysis on the first suggestion for forming a long-neck flange is verified by the experiment with aluminum 6063 pipes. From the theoretical and experimental results, it is concluded that three suggested processes are very useful in order to manufacture the pipe with a long-neck flange without any defects.

• Childhood Kidney Diseases
• /
• v.8 no.1
• /
• pp.57-62
• /
• 2004

Schinzel-Giedion syndrome is a rare, distinct dysmorphic syndrome characterized by congenital hydronephrosis, skeletal dysplasia, and severe developmental retardation, likely to be inherited as an autosomal recessive trait, but not yet confirmed. This syndrome is characterized by coarse facial features such as midfacial retraction, bulging forehead, short nose with anteverted nostrils, low-set malformed ears, protruding large tongue, and hypertelorism. Skeletal and limb defects, choanal stenosis, simian creases, hypospadias, microphallus, hypertrichosis, and intractable seizures are the frequently associated clinical findings. Urogenital involvement is a major component of the syndrome, and this problem sometimes is associated with nephrocalcinosis and urinary tract infection in the clinical course of the disease. We report a 22 month-old girl with Schinzel-Giedion syndrome complicated by medullary nephrocalcinosis and urinary tract infection due to Klebsiella pneumoniae. This patient had also been suffering from postnatal growth deficiency, intractable seizure, spastic tetraplegia, delayed development and severe mental retardation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.372-381
• /
• 2019

In this study, the National Disaster Management System (NDMS) was analyzed to evaluate the disaster impact assessment standards for steep slopes. Problems in the assessment methods and systems were discovered, which could be reasons for poor reliability. The disaster-risk evaluation index needs improvement to evaluate various types of retaining walls, such as concrete/reinforced soil walls and reinforcing stone masonry. Additionally, using the same score for overturning, bulging, and efflorescence could be reasons for poor reliability, and different weighting factors are needed. Assessment methods are needed to subdivide the social influence evaluation index while considering environmental conditions of steep slopes, such as railroads and reservoirs. For the evaluation of steep slopes, standards for start and end points of steep slopes should be created for effective management, and disaster impact assessment needs to be performed after redevelopment from an advanced index for protection and reinforcement. These problems were derived from a current evaluation system, so a disaster impact assessment is necessary to supplement the results of this study.