• 대한기계학회논문집
• /
• 제7권3호
• /
• pp.286-293
• /
• 1983

This study measures polar compressive thickness strain and radius of curvature of the bulge through Moire' method in bulge test. Hill's and Alexander's bulge theories, instability conditions derived by Swift's, Hill's, Alexander's and wang's theories, are also investigated, compared with Moire' experimental results. In order to review and compare with Hill's and Alexander's bulge theories, the relationships between radius of curvature of the bulge and polar height, between polar compressive thickness strain and polar height, are used. Mild steel, soft copper and commercial pure aluminum are used in Moire' experiment. According to this study, Hill's and Alexander's bulge theories, instability conditions derived by Swift's, Hill's, Alexander's and Wang's theories are agreement to Moire' experiment results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.702-704
• /
• 2003

In this paper, analysis of bobbin probe signal in steam generator tube with bulge defect on CE system 80 nuclear power plant is represented. The CE system 80 steam generator is adopted in ULJIN-4 nuclear power plant. From Maxwell's equation, the electromagnetic governing equation for eddy current problem is derived and by performing the finite element formulation the 3-dimensional finite element code with brick element is developed. For the ease of the comparison the numerical results with experimental ones, the calculated signals are adjusted by using the ASME standard 100[%] through hole signal. For analysis of the effect of variation of the bulge depth on the impedance signal 0.2[mm] and 0.4[mm] depth of bulge defect signals are calculated and analyzed. As the depth of the bulge defect is increased, the magnitude of the signal is increased, too. But the rate of the increment of the signal is less than that of the depth of defect. From the result of this paper, we can obtained the information of the effect of bulge defect on the impedance signal.

• 소성∙가공
• /
• 제15권6호
• /
• pp.467-472
• /
• 2006

The forming limit diagram of tube is required for the part design and the formability analysis of tube hydroforming. The finite element analyses of simple bulge test were done to obtain the various strain combinations on FLC. The finite element analysis results were shown that the bursting at various strain combinations could be induced by simple bulge test. The experiment oi tube bulge test was carried out according to the test condition that obtained from finite element analysis and the left hand side of forming limit diagram was built.

• 천문학회보
• /
• 제41권1호
• /
• pp.65.2-65.2
• /
• 2016

We present a new database of our two-dimensional bulge-disk decompositions for 14,482 galaxies drawn from SDSS DR12 in order to examine the properties of bulges residing in the local universe (0.005 < z < 0.05). We performed decompositions in g and r bands by utilizing the GALFIT software. The bulge colors and bulge-to-total ratios are found to be sensitive to the details in the decomposition technique. The g-r colors of bulges derived are almost constantly red regardless of bulge size except for the bulges in the low bulge-to-total ratio galaxies (approximately $B/T_r{\leq}0.3$). Bulges exhibit similar scaling relations to those followed by elliptical galaxies, but the bulges in galaxies with lower bulge-to-total ratios clearly show a gradually larger departure in slope from the elliptical galaxy sequence. The scatters around the scaling relations are also larger for the bulges in galaxies with lower bulge-to-total ratios. Both the departure in slopes and larger scatters are likely originated from the presence of young stars. While bulges seem largely similar in optical properties to elliptical galaxies, they do show clear and systematic departures as a function of bulge-to-total ratio. The stellar properties and perhaps associated formation processes of bulges seem much more diverse than those of elliptical galaxies.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.89-97
• /
• 1999

In this paper the forming simulations of ellipse bulge have been researched by using $PAM-STAMP_{TM}$ to estimate the sheet metal forming and the plastic deformation characteristic of ellipse bulge. Thin elliptical diaphragms of brass, copper, aluminum, and mild steel are bulged in elliptical dies having aspect ratios of 1.33 and 2. In order to compare the simulation results with the experiment and ellipse bulge's theory derived by using Johnson and Duncan's theory, the relations of hydraulic pressure and polar height, polar thickness strain and polar height, were compared. According to this study, the results of simulation and ellipse bulge's theory derived by using Johnson and Duncan's theory, and the bursting pressure and the bursting polar height are good agreement to the experiment. So, the results of simulation by using $PAM-STAMP_{TM}$ and the ellipse bulge's theory will give engineers good information to make assessment the formability and plastic deformation characteristic of hydraulic ellipse bulge test.

• 천문학회보
• /
• 제42권1호
• /
• pp.55.1-55.1
• /
• 2017

A number of recent studies have claimed that the double red clump observed in the Milky Way bulge is a consequence of an X-shaped structure. In particular, Ness & Lang (2016) report a direct detection of a faint X-shaped structure in the bulge from the residual map of the Wide-Field Infrared Survey Explorer (WISE) image. Here we show, however, that their result is seriously affected by a bulge model subtracted from the original image. When a boxy bulge model is subtracted, instead of a simple exponential bulge model as has been done by Ness & Lang, we find that most of the X-shaped structure in the residuals disappears. Furthermore, even if real, the stellar density in the claimed X-shaped structure appears to be too low to be observed as a strong double red clump at $l=0^{\circ}$

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.29-38
• /
• 1999

In this paper the forming simulation of circular bulge by using PAM-STAMP has been performed to estimate the sheet metal forning and the plastic deformation characteristic of circular bulge. The uniaxial tension tests adn bulge tests are carried out for studying the forming characteristics of materials, and also Moire experiment are carried out for measuring the radius of curvature of the bulge and the polar compressive thickness strain. In order to compare the simulation results with the experiment and Hills theory, the relationships between redius of curvature adn polar height of the bulge, between hydraulic pressure and polar height, and between polar compressive thickness strain and polar height, are used. According to this study, the results of simulation and Hills theory are good agreement to the experiment. So, the results of simulation by using PAM-STAMP and Hills theory will give engineers good information to assess the formagbility and plastic deformation characteristic of hydraulic circular bulge test.

• Advances in Computational Design
• /
• 제2권2호
• /
• pp.107-119
• /
• 2017

The Micro circular diaphragm (MCD) is the mechanical actuator part used in the micro electro-mechanical sensors (MEMS) that combine electrical and mechanical components. These actuators are working under harsh mechanical and thermal conditions, so it is very important to study the mechanical and thermal behaviors of these actuators, in order to do with its function successfully. The objective of this paper is to determine the thermo-mechanical behavior of MCD by developing the traditional bulge test technique to achieve the aims of this work. The specimen is first pre-stressed to ensure that is no initial deflection before applied the loads on diaphragm and then clamped between two plates, a differential pressure (P) and temperature ($T_b$) is leading to a deformation of the MCD. Analytical formulation of developed bulge test technique for MCD thermo-mechanical characterization was established with taking in-to account effect of the residual strength from pre-stressed loading. These makes the plane-strain bulge test ideal for studying the mechanical and thermal behavior of diaphragm in both the elastic and plastic regimes. The differential specimen thickness due to bulge effect to describe the mechanical behavior, and the temperature effect on the MCD material properties to study the thermal behavior under deformation were discussed. A finite element model (FEM) can be extended to apply for investigating the reliability of the proposed bulge test of MCD and compare between the FEM results and another one from analytical calculus. The results show that, the good convergence between the finite element model and analytical model.

• 천문학회지
• /
• 제28권2호
• /
• pp.209-221
• /
• 1995

We have examined bulge morphology of 104 bright barred galaxies, using V-band surface photometry based on the Kiso Schmidt plates. By measuring the bulge ellipticity and bulge-disk misalignment, we have classified bulges into four morphological types: sphere, oblate spheroid, triaxial ellipsoid, and pseudo triaxial ellipsoid. About half of the observed galaxies are found to have triaxial bulges with mean ellipticity of 0.24. They are distributed uniformly along the Hubble sequence.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.653-654
• /
• 2007