• Environmental Analysis Health and Toxicology
• /
• 제28권
• /
• pp.13.1-13.5
• /
• 2013

Objectives: Potential environmental risks caused by chemicals that could be released from a recycled plastic product were assessed using a screening risk assessment procedure for chemicals in recycled products. Methods: Plastic slope protection blocks manufactured from recycled plastics were chosen as model recycled products. Ecological risks caused by four model chemicals - di-(2-ethylhexyl) phthalate (DEHP), diisononyl phthalate (DINP), cadmium (Cd), and lead (Pb)-were assessed. Two exposure models were built for soil below the block and a hypothetic stream receiving runoff water. Based on the predicted no-effect concentrations for the selected chemicals and exposure scenarios, the allowable leaching rates from and the allowable contents in the recycled plastic blocks were also derived. Results: Environmental risks posed by slope protection blocks were much higher in the soil compartment than in the hypothetic stream. The allowable concentrations in leachate were $1.0{\times}10^{-4}$, $1.2{\times}10^{-5}$, $9.5{\times}10^{-3}$, and $5.3{\times}10^{-3}mg/L$ for DEHP, DINP, Cd, and Pb, respectively. The allowable contents in the recycled products were $5.2{\times}10^{-3}$, $6.0{\times}10^{-4}$, $5.0{\times}10^{-1}$, and $2.7{\times}10^{-1}mg/kg$ for DEHP, DINP, Cd, and Pb, respectively. Conclusions: A systematic ecological risk assessment approach for slope protection blocks would be useful for regulatory decisions for setting the allowable emission rates of chemical contaminants, although the method needs refinement.

• Mycobiology
• /
• 제44권3호
• /
• pp.162-170
• /
• 2016

In this paper, we demonstrate the ability of Arabidopsis thaliana to detect different mixtures of volatile organic compounds (VOCs) emitted by the common indoor fungus, Aspergillus versicolor, and demonstrate the potential usage of the plant as a bioindicator to monitor fungal VOCs in indoor air. We evaluated the volatile production of Aspergillus versicolor strains SRRC 108 (NRRL 3449) and SRRC 2559 (ATCC 32662) grown on nutrient rich fungal medium, and grown under conditions to mimic the substrate encountered in the built environment where fungi would typically grow indoors (moist wallboard and ceiling tiles). Using headspace solid phase microextraction/gas chromatography-mass spectrometry, we analyzed VOC profiles of the two strains. The most abundant compound produced by both strains on all three media was 1-octen-3-ol. Strain SRRC 2559 made several terpenes not detected from strain SRRC 108. Using a split-plate bioassay, we grew Arabidopsis thaliana in a shared atmosphere with VOCs from the two strains of Aspergillus versicolor grown on yeast extract sucrose medium. The VOCs emitted by SRRC 2559 had an adverse impact on seed germination and plant growth. Chemical standards of individual VOCs from the Aspergillus versicolor mixture (2-methyl-1-butanol, 3-methyl-1-butanol, 1-octen-3-ol, limonene, and ${\beta}-farnesene$), and ${\beta}-caryophyllene$ were tested one by one in seed germination and vegetative plant growth assays. The most inhibitory compound to both seed germination and plant growth was 1-octen-3-ol. Our data suggest that Arabidopsis is a useful model for monitoring indoor air quality as it is sensitive to naturally emitted fungal volatile mixtures as well as to chemical standards of individual compounds, and it exhibits relatively quick concentration- and duration-dependent responses.

• 대한기계학회논문집B
• /
• 제40권10호
• /
• pp.673-679
• /
• 2016

초임계 이산화탄소 사이클은 소형화 및 효율 향상에 대한 잠재력 때문에 최근 관심이 증가하고 있으며, 원자력, 태양열(CSP) 및 화력 발전 분야에서 활발히 연구되고 있다. 이와 관련하여, 본 논문에서는 한국에너지기술연구원(KIER)의 초임계 이산화탄소 동력 사이클 연구 내용과 현황을 소개하였다. 1 단계 연구에서는 단순 초임계 브레이튼 사이클 실험 루프를 제작 및 시운전 하였으며, 현재 진행중인 2 단계 연구에서는 두개의 터빈과 두개의 재생기를 갖는 초임계 이중(dual) 브레이튼 사이클을 설계 및 제작하고 있다. 최적 설계를 위한 초임계 이중 브레이튼 사이클 모델링 및 시뮬레이션 결과, 본 연구에서 고려한 조건하에서, 사이클의 순출력을 극대화시키는 설계 변수가 존재함을 확인하였다.

• 한국지반공학회지:지반
• /
• 제13권4호
• /
• pp.121-134
• /
• 1997

교통하중이나 건설 작업에 의해 야기되는 지반진동은 인접구조물에 손상을 입히거나 인근 주민들의 생활에 큰 불편을 야기할 수 있으므로 중요하게 측정, 관리되어야 한다. 지반진동으로 인해 발생하는 구조물의 손상은 진동의 직접 전파에 의한 구조물의 손상과 지반진동으로 야기된 지반의 부등 침하의 두 가지 원인으로 분류될 수 있다. 지반진동에 의한 피해를 효과적으로 줄이기 위해서는 현장에서의 정화한 진동의 측정이 필수적이다. 본 논문에서는 지반진동의 측정에 사용되어지는 대표적인 진동감지기인 속도계의 검증 방법에 대해 기술하였으며, 주파수대역 출력특성이 검증되어진 개개의 속도계로 부터 진동이 전파되는 매질인 지중에서 지반진동이 측정 가능한 3방향 진동 측정기를 제작하였고 진동측정기의 검증 및 운용법에 대하여 상세히 설명하였다. 또한 제작된 3방향 진동측정기로 열차진동, 말뚝항타진동 및 발파진동을 측정하여 적용성을 평가 하였다.

• Advances in aircraft and spacecraft science
• /
• 제3권2호
• /
• pp.113-148
• /
• 2016

In a whole variety of higher order plate theories existing in the literature no consideration is given to the transverse normal strain / deformation effects on flexural response when these higher order theories are applied to shear flexible composite plates in view of minimizing the number of unknown variables. The objective of this study is to carry out cylindrical bending of simply supported laminated composite and sandwich plates using sinusoidal shear and normal deformation plate theory. The most important feature of the present theory is that it includes the effects of transverse normal strain/deformation. The displacement field of the presented theory is built upon classical plate theory and uses sine and cosine functions in terms of thickness coordinate to include the effects of shear deformation and transverse normal strain. The theory accounts for realistic variation of the transverse shear stress through the thickness and satisfies the shear stress free conditions at the top and bottom surfaces of the plate without using the problem dependent shear correction factor. Governing equations and boundary conditions of the theory are obtained using the principle of minimum potential energy. The accuracy of the proposed theory is examined for several configurations of laminates under various static loadings. Some problems are presented for the first time in this paper which can become the base for future research. For the comparison purpose, the numerical results are also generated by using higher order shear deformation theory of Reddy, first-order shear deformation plate theory of Mindlin and classical plate theory. The numerical results show that the present theory provides displacements and stresses very accurately as compared to those obtained by using other theories.

• Journal of Biosystems Engineering
• /
• 제27권2호
• /
• pp.133-142
• /
• 2002

This is a fundamental study to develop a sensor to detect weeds in paddy field using machine vision adopted spectralphotometric technique in order to use the sensor to spread herbicide selectively. A set of spectral reflectance data was collected from dry and wet soil and leaves of rice and 6 kinds of weed to select desirable wavelengths to classify soil, rice and weeds. Stepwise variable selection method of discriminant analysis was applied to the data set and wavelengths of 680 and 802 m were selected to distinguish plants (including rice and weeds) from dry and wet soil, respectively. And wavelengths of 580 and 680 nm were selected to classify rice and weeds by the same method. Validity of the wavelengths to distinguish the plants from soil was tested by cross-validation test with built discriminant function to prove that all of soil and plants were classified correctly without any failure. Validity of the wavelengths for classification of rice and weeds was tested by the same method and the test resulted that 98% of rice and 83% of weeds were classified correctly. Feasibility of CCD color camera to detect weeds in paddy field was tested with the spectral reflectance data by the same statistical method as above. Central wavelengths of RGB frame of color camera were tried as tile effective wavelengths to distingush plants from soil and weeds from plants. The trial resulted that 100% and 94% of plants in dry soil and wet soil, respectively, were classified correctly by the central wavelength or R frame only, and 95% of rice and 85% of weeds were classified correctly by the central wavelengths of RGB frames. As a result, it was concluded that CCD color camera has good potential to be used to detect weeds in paddy field.

• 한국재료학회지
• /
• 제29권3호
• /
• pp.196-203
• /
• 2019

We report on the fabrication and characterization of an oxide photoanode with a zinc oxide (ZnO) nanorod array embedded in cuprous oxide ($Cu_2O$) thin film, namely a $ZnO/Cu_2O$ oxide p-n heterostructure photoanode, for enhanced efficiency of visible light driven photoelectrochemical (PEC) water splitting. A vertically oriented n-type ZnO nanorod array is first prepared on an indium-tin-oxide-coated glass substrate via a seed-mediated hydrothermal synthesis method and then a p-type $Cu_2O$ thin film is directly electrodeposited onto the vertically oriented ZnO nanorod array to form an oxide p-n heterostructure. The introduction of $Cu_2O$ layer produces a noticeable enhancement in the visible light absorption. From the observed PEC current density versus voltage (J-V) behavior under visible light illumination, the photoconversion efficiency of this $ZnO/Cu_2O$ p-n heterostructure photoanode is found to reach 0.39 %, which is seven times that of a pristine ZnO nanorod photoanode. In particular, a significant PEC performance is observed even at an applied bias of 0 V vs $Hg/Hg_2Cl_2$, which makes the device self-powered. The observed improvement in the PEC performance is attributed to some synergistic effect of the p-n bilayer heterostructure on the formation of a built-in potential including the light absorption and separation processes of photoinduced charge carriers, which provides a new avenue for preparing efficient photoanodes for PEC water splitting.

• Advances in aircraft and spacecraft science
• /
• 제6권2호
• /
• pp.117-144
• /
• 2019

High Altitude and Long Endurance (HALE) aircraft are capable of providing intelligence, surveillance and reconnaissance (ISR) capabilities over vast geographic areas when equipped with advanced sensor packages. As their use becomes more widespread, the demand for additional range, endurance and payload capability will increase and designers are exploring non-conventional configurations to meet the increasing demands. One such configuration is the joined-wing concept. A joined-wing aircraft is one that typically connects a front and aft wings in a diamond shaped planform. One such example is the Boeing SensorCraft configuration. While the joined-wing configuration offers potential benefits regarding aerodynamic efficiency, structural weight, and sensing capabilities, structural design requires careful consideration of elastic buckling resulting from the aft wing supporting, in compression, part of the forward wing structural loading. It has been shown already that this is a nonlinear phenomenon, involving geometric nonlinearities and follower forces that tend to flatten the entire configuration, leading to structural overload due to the loss of the aft wing's ability to support the forward wing load. Severe gusts are likely to be the critical design condition, with flight control system interaction in the form of Gust Load Alleviation (GLA) playing a key role in minimizing the structural loads. The University of Victoria Center for Aerospace Research (UVic-CfAR) has built a 3-meter span scaled and flexible wing UAV based on the Boeing SensorCraft design. The goal is to validate the nonlinear structural behavior in flight. The main objective of this research work is to perform Ground Vibration Tests (GVT) to characterize the dynamic properties of the scaled flight vehicle. Results from the experimental tests are used to characterize the modal dynamics of the aircraft, and to validate the numerical models. The GVT results are an important step towards a safe flight test program.

• 생태와환경
• /
• 제49권2호
• /
• pp.142-146
• /
• 2016

본 연구는 기후변화에 따라서 예측된 상제나비의 분포 지역에서 나타나는 지형적 특성을 평가하고자 한다. 이를 위해서 상제나비의 잠재적인 서식가능성이 서로 다른 분포지역에서 고도, 산지경사, 그리고 사면향 등 지형요소의 차이를 비교하였다. 고도와 지형경사에 따라서 상제나비가 서식할 가능성은 다르게 나타났고, 사면방향에 대한 영향 보다는 고도와 산지경사의 지형조건에 영향을 더 받을 것으로 나타났다. 특히 미래로 갈수록 상제나비의 서식가능성은 고도가 높은 지역에서 높게 나타났는데, 이는 상제나비가 잠재적으로 서식하기 적합한 현재의 기후환경이 미래에는 고도가 높은 지역으로 형성될 것으로 예상된다. 비록 서식가능성에 따라서 사면향의 차이는 통계적으로 유의하지 않지만, 주로 남동사면에 상제나비의 서식가능성이 다양하다는 것은 유충에서 성충으로 성장하기 위해서 더욱 따뜻한 열 환경 조건에 기인할 것으로 추측된다. 본 연구에서 유도된 결과는 기존에 구축된 다양한 생물 자원 정보를 활용하여 자연생태계분야에서 기후변화와 지형적인 조건을 고려하여 생물종의 서식지를 온전하게 보전하고 관리하는 정책을 수립하는 데 기초자료로 활용될 것으로 기대된다.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.519-525
• /
• 2006

Advances in information and telecommunication technology increasingly reveal the potential of computer supported education. However, most computer supported learning systems until recently did not pay much attention to different characteristics of individual learners. Intelligent learning environments adaptive to learner's preferences and tasks are desired. Each learner has different preferences and needs, so it is very crucial to provide the different styles of learners with different learning environments that are more preferred and more efficient to them. This paper reports a study of the intelligent learning environment where the learner's preferences are diagnosed using learner models, and then user interfaces are customized in an adaptive manner to accommodate the preferences. In this research, the learning user interfaces were designed based on a learning-style model by Felder & Silverman, so that different learner preferences are revealed through user interactions with the system. Then, a learning style modeling is done from learner behavior patterns using Decision Tree and Neural Network approaches. In this way, an intelligent learning system adaptive to learning styles can be built. Further research efforts are being made to accommodate various other kinds of learner characteristics such as emotion and motivation as well as learning mastery in providing adaptive learning support.