• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.118-119
• /
• 2019

The exterior finish not only has a relationship to the functionality of building, but also the spatial aesthetics and visual perception. Common exterior finishes are wood, stone or acrylic based and etc. However, these finishes have different attributes which can alter the quality of the architecture, such as durability, moisture and fire resistance. To make up for the short-comings of these materials, we have used iron based resources for optimization. However, iron materials are expensive, so they have limitations in general use. In this study, we have experimented with various forms of exterior finishes using cement, which is the most efficient and widely used building material with several economic advantages. We experimented with different materials to use as the formwork for the gloss of the cement matrix. As a result, the gloss show that order of urethane, steel, and wood material.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.103-104
• /
• 2022

In Korea, the occurrence and risk of similar fires are high, so setting up fire prevention measures through fire case investigation is considered the most basic measure in securing human safety. In particular, calculation of evacuation capacity in evacuation safety design of buildings is the most important factor that directly affects evacuation safety performance. However domestic standards is not consider about occupant characteristics. also the case of domestic, it has the problem that the law is partially applied when the fire safety design of buildings. Therefore, the purpose of this study is to study the current status and related regulations of the life safety code for the application of high fire risk buildings, and to analyze the difference in evacuation time through Case Study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.203-204
• /
• 2023

Recycled aggregate is an aggregate that satisfies the quality as an aggregate by crushing waste concrete and passing it through a separator. The government grants a floor area ratio of up to 15% and building height mitigation when more than 25% of the recycled building materials are used. In addition to environmental protection issues, it is necessary to actively utilize recycled aggregates that meet the standards to secure the business feasibility of buildings. This study attempted to derive the results according to the substitution rate by measuring the chloride ion diffusion characteristics based on the electrophoresis method.

• Korean Journal of Construction Engineering and Management
• /
• v.1 no.3 s.3
• /
• pp.108-115
• /
• 2000

The average height of buildings in most cities is increasing in an effort to more effectively use land. In addition, as construction technology develops, rapid construction methods have been pursued. However, while there have been great strides in construction technology, the development of a temporary structure that can support the high-rise building under construction and the rapid construction methods has been relatively limited. If the temporary structure is not built on an outer wall of a building being constructed, a worker may be injured or killed in a fall and building materials such as blocks and other objects may fall to the ground, causing the build-up of trash around the building and possible injuries to persons in proximity to the building. This paper proposes a Self Climbing Safety Fence for construction building(SCfence). SCfence was developed to solve the above problems, a tent has been setup to cover the outer wall of the building, or a falling preventing net has been pitched in a direction perpendicular to the outer wall of the building. A case study was performed to verify the validity of SCfence through comparing the safety and cost experience between SCfence and the existing method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.75-79
• /
• 2006

Recently, more highly effective construction materials are needed for the reasonable and economical structure system is required as the construction structures become more multi storied, large-sized and diversified. That is to say, the highly qualified concrete is positively promoted as a part of plan to establish the effective space according to the dead load of structures and diminish of segment profile and to build up the economic structures. However, the high strength concrete has the problems such high brittleness and low ductility. Specially, for the high strength concrete, it has different strength from normal concrete as the internal temperature goes up steadily due to high heat of hydration by the quantities of highly level of cement, so the concrete which is mixed with various miscible materials is used. As the development and study for high strength concrete (more than $100N/mm^2$) is under way actively and the strength of high strength concrete increases, the strength different from the existing high strength concrete of ten than $100N/mm^2$, but the study for this is not adequate and indefinite. In addition, the study and report to apply the strength expression and analysis results of internal structure. Therefore, this study is an experiment about using the miscible materials affects what happens to the longitudinal physical property.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.3
• /
• pp.127-133
• /
• 2008

Safety accident resulting from construction projects getting larger and complex day by day has occurred more often than ever. Particularly, the accident caused by construction equipment, among others, has been on the rise. To prevent such accidents, it's necessary to come up with the measures for reducing the accident. In this study, the cause of safety accidents was analyzed, reviewing the cases of safety accident maintained by Korea Occupational Safety & Health Agency, and the measures for reducing the accident was suggested with computerized safety checklist. The scope of study was limited to excavator, and the result is summarized as below. 1) Investigation was conducted to identify the cases of accident by excavator with the primary causes. 2) Reduction measures were suggested by category of cause of excavator-caused accident. 3) Checklist to prevent the safety accident, which was based on primary causes, was suggested. 4) The measures to stir up safety consciousness and monitor the safety were suggested, making use of computerized system. This study is expected to lay the foundation for further study in future as well as make a great commitment to reducing the safety accident.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.2 s.6
• /
• pp.47-58
• /
• 2001

Of all the site logistics technologies in high-rise building construction, both vertical and horizontal move plan, are the most imperative factors. And the horizontal plan follows lift-up plan as of the vertical plan. However though it may be, temporary lifts on site are numbered by heuristic formulas. The quantity of finishing material cannot be converted into lift-up load per finishing material. The lift-up plan cannot be evaluated the feasibility for finishing material move plan by a reasonable evaluation methodology. The horizontal plan is far from the vertical one. And the information as an input data for the horizontal plan is devoid of package unit size, length, and volume per finishing material. These can hardly result in reasonable and detail decision on how much to use temporary lifts, how long to use these, and where to deposit each finishing material. Therefore, this study is to suggest a decision-making model that can integrate vertical and horizontal material move plan in high-rise building construction and make a decision the plans systematically. And the study is to explain the concept, methodology, and contents of the model applied to a virtual project, named as MT 130 (Millennium Tower 130). By the model, the planner can shift his/her thinking framework on site logistics management products-oriented Into process-oriented. He/she can manage a project by the framework as system thinking, evaluate the feasibility of a lift-up plan, and decide the horizontal plan integrated with the lift-up.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.1
• /
• pp.65-73
• /
• 2009

Looking at current construction costs estimations of publicly declared public works, there are many instances where estimation criteria are ambiguous and doesn't imply the reality. Up to date, estimation criteria for calculating construction cost estimations are simply by unit area multiplication and stochastic construction cost estimation. However, possibility of making errors are high due to using uniform data that excludes each public work's specifications and environmental conditions. Further, on the aspect of cost management, there is certain limitation in the efficiency of cost management in order-placing stage and commencing-work stage; while efficient cost management and reduction of expenses are highly possible during initial stages of the project. In this respect, the paper adopts positive approach with regards to construction cost estimations of public works and draws common elements from calculation tables of the construction cost estimations from 3 completed domestic construction works; after which, the paper analyzes whether business exposition, construction guide and publicly-declared estimated construction costs that the orderer issued are calculated economically and properly; deducing problems in the process, the paper seeks to recommend rational calculation method on this.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.137-138
• /
• 2011

Mainly in construction liens to four contractors do not receive your order is caused by construction. This construction does not receive construction compunction to protect the contractor, I guess. On the other hand, the medium and small construction companies and contractors that could threaten the order four can be a problem. In this study, small construction companies to the lien of the lien claim on the issue of case studies have looked for the study. Small construction companies, in your case through the litigation between the lien of the lien litigation perspective, the cause of four orders after the analysis step by step construction was listed in chronological order. Identifying problem was the result of a lien. This study to previous studies regarding the lien on the issue through case studies of one kind of lien was derived for the problem. A follow-up studies and more case studies and interviews are considered necessary in the study.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.19-21
• /
• 2012

This paper was to investigate the effect of incinerator ash on engineering properties of the high volume blast furnace slag concrete through Mock-up test. Test results revealed that the use of recycled aggregates resulted in increase of slump compared with the OPC concrete. But, the use of recycled aggregates did not affect the results of air contents and chloride contents. The use of recycled aggregates showed shortening of setting time of high volume blast furnace slag concrete. When the recycled aggregate was used, delay in strength development at early age happened with high volume blast furnace slag concrete compared with that of OPC concrete.