• Earthquakes and Structures
• /
• v.11 no.1
• /
• pp.83-107
• /
• 2016

In this study, the response and behavior of machine foundations resting on dry and saturated sand was investigated experimentally. A physical model was manufactured to simulate steady state harmonic load applied on a footing resting on sandy soil at different operating frequencies. Total of (84) physical models were performed. The parameters that were taken into consideration include loading frequency, size of footing and different soil conditions. The footing parameters are related to the size of the rectangular footing and depth of embedment. Two sizes of rectangular steel model footing were used. The footings were tested by changing all parameters at the surface and at 50 mm depth below model surface. Meanwhile, the investigated parameters of the soil condition include dry and saturated sand for two relative densities; 30 % and 80 %. The dynamic loading was applied at different operating frequencies. The response of the footing was elaborated by measuring the amplitude of displacement using the vibration meter. The response of the soil to dynamic loading includes measuring the stresses inside soil media by using piezoelectric sensors. It was concluded that the final settlement (St) of the foundation increases with increasing the amplitude of dynamic force, operating frequency and degree of saturation. Meanwhile, it decreases with increasing the relative density of sand, modulus of elasticity and embedding inside soils. The maximum displacement amplitude exhibits its maximum value at the resonance frequency, which is found to be about 33.34 to 41.67 Hz. In general, embedment of footing in sandy soils leads to a beneficial reduction in dynamic response (displacement and excess pore water pressure) for all soil types in different percentages accompanied by an increase in soil strength.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1285-1290
• /
• 2008

The interest in use of new field of energy and unused existing potential energy has been raised in number of advanced countries including South Korea. As a respond of the interest and the following reactions, a new technology which helps to reduce bad environmental factors and decrease national energy consumption rate in the way of extract cold-heat energy in dam water. This research focuses on a method that enables taking the water flows in desirable temperature range whilst keeping water temperature boundaries of bottom level water. The analysis was made in simulating on CFD. In order to keep the temperature boundary level, a deep well pump was set in piping in the simulation. As the significant result, the most alteration in temperature was found when the smallest size of pipe was plumbed. However, when the flow has small value of velocity, no matter how big the piping size was, the temperature variation was negligible. Therefore, possible hypothesis was made as bigger piping as fast flow will have better function in the way to keep the temperature boundary level.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.53-63
• /
• 2016

This study aims to discuss what is needed for meaningful development of social service, focusing on Community Service Investment Project(CSIP). The contents of CSIP were analyzed on applying the Analytic Framework by N. Gilbert and H. Specht and the values that were the basis of social choice. Based on the analysis of output and policy value of this Project, this study draws three social service policy issues. First, 'localization' is needed to be emphasized more in CSIP because there are few programs that take into account the regional peculiarities. Second, as the social services focused on the individuality of the citizen is more important, it is necessary to examine 'sustainability' of CSIP. Third, in relation to the community building, it is necessary to discuss the modification of the CSIP's goals. As process for improving community, it is needed to review for local residents not participating in decision-making process, income-based user selection and appropriateness of the term 'investment' in the project name.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.617-623
• /
• 2014

This study aims to organize the pharmacological component of native chicken(NC) by analyzing the bill presented in traditional medicine NC relevant literature. And the analyze the heterogeneity and the common prescription of chicken that a variety of traditional technologies to existing treatment books private data to organize information about the scientific verification. After the analysis by building a DB and want a prescription to traditional book, herbal medicine usability throughout the assessment of the special treatment provided the basis for further product and a variety of functional food development. In addition, the continued expansion of the country and future growth engine industry related businesses through added value of cultural knowledge resources. NC of the relevant search and information system for prescription knowledge. so standardized, conceptualization, formalization is to build a knowledge of traditional medicine NC recipe DB assess the usefulness of medical literature through interdisciplinary research systems to suggest practical ways of alternative medicine and functional food development.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.62-67
• /
• 2007

The research team for the virtual construction development was established with the support of Korea Ministry of Construction and Transportation, and KICTEP (Korea Institute of Construction and Transportation Technology Evaluation and Planning). Its aims are to develop system that is to improve productivity & quality, to create a higher value-added business, and to cultivate international competitiveness in the construction industry. The virtual construction system is a design, engineering, and construction management information system that allows the project participants to effectively share the information throughout the construction life cycle with the support of 3D and design information. To achieve this, the research team focuses on developing several systems. First, the team focuses on developing for the pre-planning, the structural engineering, MEP, and the 3D based estimation system. Second, they focus on developing a simulation system for the construction process planning and feasibility study with help of the virtual reality technologies. Third, they focus on developing the CPLM (Construction Project Life-cycle Management) system for managing construction project data, and the decision support system that makes the collaboration among the project participants based on 3D technologies and information. We also focus on developing the SDAI (Standard Data Access Interface), the localized guideline for 3D design, and a training program. In addition, we focus on developing the undeveloped area of the commercial system and building an environment that can support the communication and collaboration in the construction life-cycle rather than developing the existing and commercialized system.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.96-103
• /
• 2015

The aim of this paper is to analyze combustion characteristics of treated woods by fire retardants which are prepared by several borate and phosphate compound solutions. The combustion characteristics for flame retardant treated wood were carried out using thermogravimetric analysis (TGA) to measure their combustion heat and flame retardant test using cone-calorimeter. The result of TGA and flame retardant test showed that single chemical solution affected the char forming and flame delay. The mixed retardants solutions was believed to be related to the efficacy and property of single chemical. The retention value and concentration of the retardants also affected the performance of fire retardant treated woods. The fire retardants FR1 and FR2 satisfied the requirement of The 3 Grade of Korean building codes.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.234-241
• /
• 2008

The feature of the hotel business as a labor intensive industry and its heavy dependence on man power is relatively bigger than other industries. the important factors influencing the customer`s decision making are tangible facilities and intangible service qualities. however, the changes in economic situation are also seriously influencing them. So hotels are started to find other IT(information technology) systems. BSC which has been recognized as one of barometers to establish management performance is one of them. The purpose of this study was to develop KPI(key performance indicator) by using the BSC(Balanced Scorecard) for evaluating hotel management performance. This thesis presents customer performance, inner process performance, learning and growing performance as non-financial factors and tries to examine the cause and effect in the hotel industry. Hotels have to know nonfinancial performance which has positively relate to financial performance. To introduce BSC system is not to lead increasing income and bettermenting service quality, satisfacting customer needa for hotels, But to lead developing value enhancement to hotel enterprises and present process.

• Journal of Agricultural Extension & Community Development
• /
• v.17 no.3
• /
• pp.527-548
• /
• 2010

The objective of this study is to suggest the developmental tasks for the successful fostering the Farmer's Study Group which have been guided by the agricultural extension work since 1994 in Korea. The 3,278 farmers study groups with 148,420 memberships have been organized in field of grains, cash crop, horticulture, livestock, improving living conditions, food processing and so on. Although the number of study groups have rapidly expanded, there also are tasks to be secured for their successful development in terms of (a) desirable phase of the study groups and goals of its fostering, (b) managements / administration of them, (c) long-term tasks to be reviewed. With regard to the desirable phase of the study groups and goals of its fostering, they should secure differential mission and the way of works compare to the other farmer's groups. Also, there should be consensus on the proper number of study groups to be fostered with a agricultural technical center at local level. With regard to the managements / administration of the study groups, there should be the different support, assistance and guidance according to the developmental level of the groups. For these, there should be evaluation works on the groups, and guidance manuals for the extension workers. Also extension works should facilitate the establishment of networks among groups over the counties. Finally, to establish the nationwide association in hierarchy and to make the cooperative works with similar farmer's group, doing the value-added activities rather than mere information exchange, and the introduction of capacity building programs for the extension workers are long-term tasks needed to review for the successful fostering study groups.

• Journal of architectural history
• /
• v.14 no.4 s.44
• /
• pp.117-135
• /
• 2005

This paper is a study of the possibility of experience and expression in the architecture of Louis I. Kahn by focusing on the characters of entrance, court and window/wall of his public buildings. In the course of composition, Kahn defined the entrance, court and window/wall as an connecting elements and elements of boundary. The characters revealed by these elements or rooms give the clue to insight Kahn's thought of relation of interior and exterior space or inner and outer space. Following are the characters of these elements. First, a entrance reveals the fact that inner space separates from outer space by connecting these two space and giving the value to inner space as the entity and totality like outer space. The entrance gives its ontological being to human subjects not by vision but experience and expression which is the essence of commonness, that is, Silence. Kahn made the possibility of activity amplify in this common and silent space. Second, this entrance is connected with wide and huge central space not individual spaces of interior space. This extreme procedure of entering makes human subject feel sublime of intoner space. And the central spaces becomes another exterior or another world in the inner world of architecture by the lights from above and by having the boundary wall which shows same pattern of exterior wall. Third, Kahn regarded a window as the giver of lights not as the medium of vision connecting inner space with outer. He tried to connect interior with exterior through the being and character of the light expressed in the interior. And in his buildings, interior space is connected with exterior by expressing the purpose of building, composition of inner space, structural truth and construction facts through the Form, a pattern of wall, details and ornamental joints. By practicing this thoughts in the real buildings, Kahn tried to gave aura to both the interior space and entity of architecture which is regarded as micro universe like flowers, rocks and human beings.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.6
• /
• pp.37-46
• /
• 2012

In Korea, most existing school buildings have been constructed with moment frames with un-reinforced infill walls designed only considering gravity loads. Thus, the buildings may not perform satisfactorily during earthquakes expected in Korea. In exterior frames of the building, un-reinforced masonry infill walls with window openings are commonly placed, which may alter the structural behavior of adjacent columns due to the interaction between the wall and column. The objective of this study is to evaluate the seismic performance of existing school buildings according to the procedure specified in ATC 63. Analytical models are proposed to simulate the structural behavior of columns, infill walls and their interaction. The accuracy of the proposed model is verified by comparing the analytical results with the experimental test results for one bay frames with and without infill walls with openings. For seismic performance evaluation, three story buildings are considered as model frames located at sites having different soil conditions ($S_A$, $S_B$, $S_C$, $S_D$, $S_E$) in Korea. It is observed that columns behaves as a short columns governed by shear due to infill masonry walls with openings. The collapse probabilities of the frames under maximum considered earthquake ranges from 62.9 to 99.5 %, which far exceed the allowable value specified in ATC 63.