• 한국건축시공학회지
• /
• 제14권2호
• /
• pp.143-149
• /
• 2014

본 연구에서는 국내 공동주택의 건축 형식이 벽식 구조에서 기둥식 구조로 변화하면서 기둥식 구조에서 사용되는 건식 경량벽체에 대한 내화성능과 차음성능 기준을 제시하고자 하였으며, 공동주택 세대간 벽체의 경우는 국내 건축법에서 이미 의무화되어 있는 기준이 있어, 국내에 기준이 없는 세대내 벽체를 대상으로 내화성능은 30분의 내화성능을 1등급으로 하여 3개 성능등급으로 구분하였으며, 차음성능은 Rw+C값이 최소 35dB를 최소등급으로 3개 성능 등급을 기준을 제시하였다.

• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

• 한국화재소방학회논문지
• /
• 제25권3호
• /
• pp.99-106
• /
• 2011

본 연구에서는 공사현장에서 사용하고 있는 칼라 부직포의 화재위험성을 평가하기 위하여 콘칼로미터와 수직화염전파성 실험을 실시하였다. 그 결과 칼라 부직포는 표변에 화염이 착화가 되는 것이 아니라 용융이 된 상태에서 가연성가스가 발생되어 착화되는 연소형태를 보였다. 수직화염전파성 실험의 경우 가열강도에 의해 칼라 부직포가 수축 및 파단되어 화염이 전파되지 않을 정도로 열에 매우 취약하였다. 총방출열량은 2.66 MJ/$m^2$로, 건축물 실내마감재료 난연성능평가의 준불연재료(10분), 난연재료(5분) 8 MJ/$m^2$ 이하 기준에 규합되지만 이것은 내장재의 기준으로 칼라 부직포가 난연성능을 가지고 판단할 수 없으며 외장재에 대한 난연성능과 실험방법에 대한 기준이 마련되어야 한다고 판단된다.

• 한국BIM학회 논문집
• /
• 제12권1호
• /
• pp.42-54
• /
• 2022

BIM facilitates data transparency and consistency through three-dimensional parametric modeling and promotes the accurate managing and sharing of project information. In Korea, however, BIM-based detailed design of architectural interior finishes required during the Construction Documents phase increases the burden on architectural firms due to frequent design changes and manual workload. Therefore, the purpose of this study was to establish rule-based modules using parametric modeling that automates repetitive tasks that occur during the detailed design of interior finishing. Interviews with practitioners were conducted to analyze the major finishing elements. Of these floors, walls, and ceilings, which were the most rudimentary and common items, were selected as the subjects of the study. The modules developed in this study have two functions. One is to create new finish types, and the other is the automatic modeling of new types into rooms. For these functions, parameters that belonged to each finish and room element in a BIM model were analyzed and valid parameters directly used for parametric modeling were derived. Then, based on these parameters, rule-based modules for three elements, I.e., floors, walls, and ceilings were constructed with Revit Dynamo, and the effectiveness of the modules was verified with a pilot test. In conclusion, this study suggested a series of processes for automatic finishing to improve the efficiency of BIM-based architectural detailed design of finishes and to contribute in solving the chronic problems occuring during current design processes.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.346-351
• /
• 2006

Community facilities in apartment complex was developed through combination with residents' needs about housing environmental amenity, marketing competition among construction companies and social trend 'Well-being' . But community facilities and fitness center which are situated in the beginning are alienated by residents because the designers plan community facilities without considering about residents' life-style and preference. In this paper, the study includes present status of fitness center and residents' preference for proper fitness center design. The result presents that fitness center users in apartment complex want a resting space which is already located in fitness center of mixed-use residential building. A resting space provides conditions that users can make up with the community each other as well as they can rest after exercise. And the fitness center users prefer wood as interior finish material of floor and wall in exercising space and resting space because they have a feeling comfortable and splendid.

• Composites Research
• /
• 제18권4호
• /
• pp.59-65
• /
• 2005

This report is on the Reinforcing System(MFRI) for Concrete Structure using FRP ROD & High-Performance Mortar. The main characteristic of this system is as follow. First, the fiber rods in this system have seven times greater tensile strength than general reinforcing steel bars(re-bar) and the weight is a fifth lighter. Camels coated on the fiber rods' surfaces to improve adhesive strength and pull-out strength. Second, high strength shotcrete mortar is has very good workability and low rebound rate. After installing the Fiber Rods, Shotcrete mortar Is applied or sprayed to finish reinforcement. Finally, MFRI system has excellent fire-resisting performance and sogood tolerance against external environment by inserting fiber rods and reinforcing materials into mortar which has high compressive strength. It is applied to bridge slab, utility box and tunnel of civil engineering works, and beam and slab of building structures.

• 한국기계가공학회지
• /
• 제2권1호
• /
• pp.45-50
• /
• 2003

In any rapid prototyping process, the layer by layer building process introduces an area error between the staircase and the surface line specified by the computer-aided design model. This affects the dimensional accuracy as well as the surface finish for different Road Widths. This paper describes a methodology for computing the area error for any Road Width by the fused deposition modelling system. This technique can be applied to determine the best Road Width of the part, based on the minimum area error. This technique is verified by comparing the results with the experimental measurements of the area error with Road Widths.

• KIEAE Journal
• /
• 제9권3호
• /
• pp.29-36
• /
• 2009

Interior material covering as the final process of house-building, critically influences not only aesthetic character but also air quality of indoor space. Wall covering today, however, caused a serious social problem because of chemicals contained in the industrial wallpaper and artificial glue. In this context, Korean traditional wall covering of Han-ji can be an alternative model due to it's ecological character. Recently 'Hanok' attracts public attention, since society and people become to appreciate the unique beauty and value of our traditional culture. The values include natural beauty, emotional character, and environment-friendliness. Recognizing this, this paper intended to scrutinize the operating process of Han-ji as an interior finish material. Historical research method was employed, tracing the related articles in old literature and interviewing with the witness of the experienced expert. Thereby, healthier and unique aesthetic indoor environment can be expected to be sustainable along with the rich cultural life of ancestors.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2011년도 춘계학술논문발표회 논문집
• /
• pp.340-344
• /
• 2011

건축물 마감재료의 연소시 발생되는 독성가스는 대형화재로 인한 인명피해의 주된 원인 중의 하나이다. 현행 건축법에서는 건축물마감재료에 대하여 동물의 평균행동정지시간을 측정하는 가스유해성시험을 실시하고 있다. 본 연구는 동물시험이 아닌 NFPA 269에 의한 유효량분율(FED: Fractional effective does)을 이용하여 건축물 마감재의 독성지수를 도출하였다. 현행 가스유해성 평가 방법에서 사용되는 채임버(피검상자)를 이용하여 적외선분광분석 및 산소분석기로 연소가스를 정량 분석하였으며, NFPA269에서 규정하는 FED를 도출하였다. 몇 가지 건축재료에 대한 가스유해성시험의 평균행동정지시간과 FED의 상대적인 비교를 통해 연소가스독성평가를 수행하였다.

• 한국주거학회논문집
• /
• 제14권6호
• /
• pp.135-146
• /
• 2003

The purpose of this study is to provide the technical methods of apartment remodeling. To gather information, a survey of the technical methods of apartment remodeling in domestic and foreign was conducted. As a case study, three types will be applicable to apartment remodeling： Horizontally expanding remodeling, combining remodeling, conversion remodeling. The results of the study are as follows： 1. Horizontally expanding remodeling type will be applied the dry construction and anchor pile foundation at skeleton and the double flooring at infill. 2. Combining remodeling type will be applied the dry wall construction in order to establish or remove the partition walls. 3. Conversion remodeling type will be applied that converting building equipments and interior finish materials conversion of old to new materials.