• Proceedings of the KOR-KST Conference
• /
• 1995.05a
• /
• pp.51-59
• /
• 1995

It is an objective of Shanghai urban development to quickly build Shanghai into one of the international centres of economy, finance and trade. To fulfil the objective, a rational urban general layout and a satisfactory traffic network are needed. As a metropolis with complete urban functions and specified geographical position, Shanghai must develop a perfect citytown system that best suits its composite urban distribution. In planning the central city, the principle of "open and multi-centred" and "optimization of land use" should be taken into consideration. To build a satisfactory urban traffic network, emphasis should be laid upon the construction of deefwater wharf, air-field and inforation centre. In addition, determination should be made to build a high-speed traffic means including high speed railroad and express highway so that a public traffic network is realised on and above ground, and underground. A solution of traffic preblem in Shanghai lies in good understanding of traffic policy and strenthening of strategic management combined with a rational layout of traffic circulation.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1231-1242
• /
• 2020

The Kori Unit 1 will be decommissioned after a permanent shutdown in June 2017. South Korea has a 0.1 mSv/yr exposure limit standard for limited or unlimited site release. This is South Korea's first commercial NPP; therefore, if the containment building is reused as a memorial hall, it will contribute to the improvement of public understanding and enhance the public's acceptance of NPPs. Also, existing Kori Unit 1 nuclear power plant manpower resources can be reused after decommissioning and resident staff and memorial hall visitors can activate nearby commercial areas. Therefore, such a reuse scenario may also prevent an economic recession. The exposure dose was calculated using the following scenarios: worker in the containment building, visitor in the containment building, and worker in buildings other than the containment building. The exposure dose in the buildings was calculated by the RESRAD-BUILD developed by the Argonne National Laboratory (ANL). The preliminary exposure dose and derived concentration guideline level (DCGL) were derived.

• Journal of the Korean housing association
• /
• v.24 no.6
• /
• pp.141-150
• /
• 2013

Hanok is Korea's traditional housing, which is build detached unit. Most of the People who live in the environment of residential high-rise apartments likes new residential environment, and pursue eco-friendly homes, health homes, especially traditional Hanok was reassure potential. In urban context, resident think more compact land use in Hanok also, because Hanok is dissatified in compact land use, and it should be build as more economic aspect. The purpose of this study is to propose a typology which traditional Hanok also can be build higher land use and traditional values as a modern housing type; First of all, clustered Hanok is formed by traditional houses and interior spaces in modern house., and its types are configured by lifestyle of modern and image element of traditional Hanok. This kinds of clustering Hanok can be seen from historical city, but the trends is a minority of the housing type and form. Now, the modern clustering Hanok, even though handful of cases, appears as sustainable housing type, its possibilities as a new housing should be more detailed researches. A elements of Modern cluster Hanok discused in layout, plan, envelopment of house, structure, roofs, and the coordination of the element can be so much diverse.

• Journal of Korea Foundry Society
• /
• v.40 no.2
• /
• pp.34-42
• /
• 2020

The effects of the initial balancing pressure, filling pressure and maximum build-up pressure on the casting characteristics of the thick-wall thickness casting during the counter-pressure casting process were investigated. Water model experiment and a computer simulation were carried out to evaluate the characteristics during the filling and solidification stages in counter-pressure casting (CPC); as a reference, the low-pressure casting (LPC) process was used. The average dendrite cell size decreased with an increase in the solidification rate and maximum build-up pressure. A turbulent flow occurred during the filling stage of the LPC process, resulting in the formation of inner gas, while a lamellar flow pattern dominated during the CPC process and was more evident with an increase in the initial balancing pressure, improving the mechanical properties of the castings.

• The Mathematical Education
• /
• v.53 no.4
• /
• pp.493-507
• /
• 2014

The purpose of this study is to analyze how high school students form and interpret the mental image in the process of solving regular polyhedron problems. For this purpose, a set of problems about the regular polyhedron's vertex is developed on the base of the regular polyhedron's duality and circulation. and applied to 2 students of the 12th graders in D high school. After 2 hours of teaching and learning and another 2 hours of mental image-analysis process, the following research findings are obtained. Fisrt, a student who recorded medium high-level grade in the national scholastic test can build the dynamic image or the patten image in the process of solving regular polyhedron's vertex problems by utilizing the 3D geometry program. However, the other student who recorded low-level grade can build the concrete-pictorial image. Second, pattern image or dynamic image can help students solve the regular polyhedron's vertex problems by proper transformation of informations and the mental images while the concrete-pictorial image does not help. Hence, it is recommended that the mathematics teachers should develop teaching and learning materials about the regular polyhedron's duality and circulation and also give students suitable questions to build the various mental images.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.19-25
• /
• 2000

Dielectric polymer films produced from benzocyclobutene (BCB) formulations (CYCLOTENE＊ family resins) are known to possess many desirable properties for microelectronic applications; for example, low dielectric constant and dissipation factor, low moisture absorption, rapid curing on hot plate without reaction by-products, minimum shrinkage in curing process, and no Cu migration issues. Recently, BCB-based products for thick film applications have been developed, which exhibited excellent dissipation factor and dielectric constant well into the GHz range, 0.002 and 2.50, respectively. Derived from these properties, the applications are developed in: bumping/wafer level packaging, Ga/As chip ILD, optical waveguide, flat panel display, and lately in BCB-coated Cu foil for build-up board. In this paper, we review the relevant properties of BCB, then the application areas in bumping/wafer level packaging and BCB-coated Cu foil for build-up board.

• Journal of Technologic Dentistry
• /
• v.33 no.4
• /
• pp.313-321
• /
• 2011

Purpose: The purpose of this study was to compare color parameters of different fabrication method of Lava ceram powder, Lava DVS blocks, IPS e.max ceram and IPS e.max zirpress. Methods: The three available shades(A1, A2, A3.5) of Lava & Kavo zirconia blocks were examined. For each of three colors, three different thickness were tested, 5 times of measurement frequency. The measurements were made using a spectrophotometer equipped with an integrating sphere using the CIE $L^*$, $a^*$, $b^*$ colorimetric system. Results: Lava build-up group and Lava DVS group showed clinically perceived color difference, on the other hand IPS e.max build-up group and IPS e.max zirpress group did not show clinically perceived color difference to shade allowed on core. When the thickness of porcelain veneer increased from Lava and IPS e.max groups, color differences(${\Delta}E$) were decreased. Conclusion: All-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• Journal of Family Resource Management and Policy Review
• /
• v.15 no.3
• /
• pp.23-42
• /
• 2011

This study proposes a plan for the residents to have a capacity to build a family-friendly community on their own. As there is not a family-friendly community related program developed for "Resident's Capacity Reinforcement", three programs closely related with family-friendly community program were analyzed instead. Analysis showed that first, the community spirit must be emphasized to maintain the characteristics of family care with social support. Second, educational contents must reflect resident's capacity elements that are necessary for participating in the family friendly community building stages. Third, there is a necessity for systematization of education courses into beginner, intermediate, and specialty course given education is continued. Fourth, there is a necessity for the curriculum that may be used for the family friendly community building to foster human and material resource management ability. Therefore, framework for the educational contents suggests X-axis and Y-axis presented by person-business and morphogenic-morphostatic as referred to Ulrich(1997),s human resource model. However, this study has limitations because educational program of 'livable community building' are analyzed for the plan to reinforce capacity to build family-friendly community. There is a necessity for continuing to improve the program by in depth interview or social survey with residents and leader in community.

• The Research Journal of the Costume Culture
• /
• v.21 no.4
• /
• pp.585-595
• /
• 2013

The most researches developing pattern of compression style sportswear were targeted at the live model that has muscular body build. The purpose of this study was developing a method for classifying men's lower body types in terms of muscular body build. The 3D human body scan data and body measurements of 30s of Size Korea were analyzed. The subjects (n=203) were men between the ages of 30 and 39 years. Men's muscular body build was classified with two key dimensions, thigh girth and calf girth. The subjects were divided into four groups. From each group, average subjects (n=42) whose height and weight were close to the mean value ($mean{\pm}1/2$ S.D.) were selected. 42 subjects were divided up as four groups. Group I (n=7) was thigh and calf developed body type. Group II (n=9) was thigh developed body type. Group III (n=11) was calf developed body type. Group IV (n=15) was thigh and calf undeveloped body type. Four groups had distinct different at widths (n=4), depths (n=4), and girths (n=9) dimensions. The results showed that the muscular men in their 30s could be defined by thigh and calf girths. The thigh developed muscular men had thigh girth over 60cm and the calf developed muscular men had calf girth over 38cm. From each group one representative was selected by 3D body scan figure.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.3
• /
• pp.30-39
• /
• 2012

Design-build (D&B) has been broadly perceived as an effective project delivery method and become popular in the world. However, the implementation process of this innovative procurement method in Vietnam encounters difficulties due mainly to unfamiliarity and inexperience with the approach. Critical success factors (CSFs) which could be used to enhance the project execution are useful to practitioners in Vietnam if identified. A questionnaire survey was employed to identify CSFs of D&B projects in Vietnam. Parties' competence, especially financial capability, and contract documentation are the most important factors significantly affecting project success. It was also shown that the perspectives of two principal parties in D&B projects on the CSFs are statistically correlated. The identified CSFs were then validated with some various D&B projects. The execution results of CSFs' were compared with the projects' performance measured try key performance indicators (KPIs). The most important success factors of this study were also compared with other countries'. The validation and comparison results provide project participants with some useful information to perform D&B projects better. Practitioners should well perform the identified CSFs to enhance the chance of the success of D&B projects in Vietnam. The findings of this study are useful not only to Vietnamese practitioners but also to others who are concerned about D&B method and plan to employ it in Vietnam in future.