• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.832-844
• /
• 1999

In this paper, we analyzed mobile-IP protocol of IETF, and propose new method to improve performance in handover environments. In proposed method, cache agent manages mobility binding information for mobile host. Thus, effective support of mobility is possible. Also, when handover occurs, mobile host recognizes change of foreign agent, and transmits registration message to new foreign agent. However, during registration time, data packet loss is occurs in old foreign agent. Thus, we prevent data loss by using data packet buffering and forwarding in old foreign agent.According to simulation results for data packet transmission performance in the case of handover occurring, proposed method has better performance than previous method in the view of transmission delay and throughput. Especially, if handover occurs very often, data buffering and forwarding method in foreign agent could guarantee better performance.

• Journal of Korean Dental Science
• /
• v.11 no.1
• /
• pp.5-13
• /
• 2018

Purpose: Surface treatment with pH buffering agent has been developed to achieve higher and faster osseointegration. The aim of this study was to evaluate its influence by measuring removal torque and analyzing histological characteristics. Materials and Methods: Titanium implants with following surfaces were used in this study: sand-blasted acid-etched (SA) surface (SA group as control I group), SA surface in calcium chloride aqueous solution (CA group as control II group) and SA surface coated with pH buffering agent (pH group as test group). Removal torque test after 2 weeks and bone-to-implant contact and bone area analyses at 2 and 4 weeks were performed. Result: The rotational torque values at 2 weeks were significantly higher in pH group ($107.5{\pm}6.2Ncm$, P<0.05). The mean values of bone-to-implant contact at 2 and 4 weeks were both higher in pH group ($93.0%{\pm}6.4%$ at 2 weeks, $88.6%{\pm}5.5%$ at 4 weeks) than in SA group ($49.7%{\pm}9.7%$ at 2 weeks, $47.3%{\pm}20.1%$ at 4 weeks) and CA group ($73.7%{\pm}12.4%$ at 2 weeks, $72.5%{\pm}10.9%$ at 4 weeks) with significances (P<0.05). The means of bone area showed significantly higher numbers in pH group ($39.5%{\pm}11.3%$ at 2 weeks, $71.9%{\pm}10.9%$ at 4 weeks, P<0.05). Conclusion: Our findings demonstrated that surface modification with pH buffering agent improved early osseointegration with superior biomechanical property.

• Journal of Life Science
• /
• v.12 no.5
• /
• pp.566-569
• /
• 2002

Acetobacter strains are bacteria that can synthesize cellulose when grown on an undefined medium containing glucose. Several culture conditions affecting cellulose production by Acetobacter sp. A9 were examined by cultivating cells under shaking cultures. The addition of buffering agents, such as 3-(N-morpholino) propanesulfonic acid (MOPS) and CaCO$_3$, increased cellulose production. It suggests that pH of culture medium is important to an economical mass cellulose production. Addition of bead (Ф10 w) to culture medium stimulated 'disintegrated bacterial cellulose' production.

• Current Photovoltaic Research
• /
• v.1 no.1
• /
• pp.44-51
• /
• 2013

For preparing a device-quality $CuInSe_2$ (CISe) light-absorbing layer by single-bath electrodeposition for a superstrate-type CISe cell, morphological properties of the CISe layers were investigated by varying concentrations of sulfamic acid and potassium biphthalate, complexing/buffering agents. CISe films were grown on an $In_2Se_3$ film by applying a constant voltage of -0.5V versus Ag/AgCl for 90 min in a solution with precursors of $CuCl_2$, $InCl_3$, and $SeO_2$, and a KCl electrolyte. A dense and smooth layer of CISe could be obtained with a solution containing both sulfamic acid and potassium biphthalate in a narrow concentration range of combination. A CISe layer prepared on the $In_2Se_3$ film with proper concentrations of complexing/buffering agents exhibited thickness of $1.6{\sim}1.8{\mu}m$ with few undesirable secondary phases. On the other hand, when the bath solution did not contain either sulfamic acid or potassium biphthalate, a CISe film appeared to contain undesirable flake-shape $Cu_{2-x}Se$ phases or sparse pores in the upper part of film.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.163-169
• /
• 1999

Mobile-IP has been designed to have mobile computer users move from place to place without changing their IP addresses. Mobile-IP introduces the following entities to support mobility: Home Agent. Foreign Agent, etc., and it uses the techniques such as Agent Discovery, Registration. and Tunnelling. Mobile-IP route optimization provides a mechanism by which correspondent nodes are enable to know the mobile host's care-of address to alleviate the triangle routing problem. As a further performance improvement, to alleviate the overhead resulted from the frequent local mobility within a site hierarchical foreign agents are presented, and as a foreign agent which is willing to participate in communication maintain a buffering mechanism not to loss packets for mobile host, smooth handoffs is presented. In this paper, the problems to be thought to support host's mobility and the existing method to support it is discussed.

• Journal of Periodontal and Implant Science
• /
• v.49 no.6
• /
• pp.366-381
• /
• 2019

Purpose: The purpose of this study was to evaluate the effectiveness of conventional sandblasted, large-grit, acid-etched (SLA) surface coated with a pH buffering solution based on surface wettability, blood protein adhesion, osteoblast affinity, and platelet adhesion and activation. Methods: Titanium discs and implants with conventional SLA surface (SA), SLA surface in an aqueous calcium chloride solution (CA), and SLA surface with a pH buffering agent (SOI) were prepared. The wetting velocity was measured by the number of threads wetted by blood over an interval of time. Serum albumin adsorption was tested using the bicinchoninic acid assay and by measuring fluorescence intensity. Osteoblast activity assays (osteoblast adhesion, proliferation, differentiation, mineralization, and migration) were also performed, and platelet adhesion and activation assays were conducted. Results: In both the wetting velocity test and the serum albumin adsorption assay, the SOI surface displayed a significantly higher wetting velocity than the SA surface (P=0.000 and P=0.000, respectively). In the osteoblast adhesion, proliferation, differentiation, and mineralization tests, the mean values for SOI were all higher than those for SA and CA. On the osteoblast migration, platelet adhesion, and activation tests, SOI also showed significantly higher values than SA (P=0.040, P=0.000, and P=0.000, respectively). Conclusions: SOI exhibited higher hydrophilicity and affinity for proteins, cells, and platelets than SA. Within the limits of this study, it may be concluded that coating an implant with a pH buffering agent can induce the attachment of platelets, proteins, and cells to the implant surface. Further studies should be conducted to directly compare SOI with other conventional surfaces with regard to its safety and effectiveness in clinical settings.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.1
• /
• pp.29-32
• /
• 2005

Chemical mechanical polishing is an essential process in the production of copper-based chips. On this work, the stability of hydrogen peroxide ($H_{2}O_{2}$) as an oxidizer of copper CMP slurry has been investigated. $H_{2}O_{2}$ is known as the most common oxidizer in copper CMP slurry. But $H_{2}O_{2}$ is so unstable that its stabilization is needed using as an oxidizer. As adding KOH as a pH buffering agent, stability of $H_{2}O_{2}$ decreased. However, $H_{2}O_{2}$ stability in slurry went up with putting in small amount of BTA as a film forming agent. There was no difference of $H_{2}O_{2}$ stability between pH buffering agents KOH and TMAH at similar pH value. Addition of $H_{2}O_{2}$ in slurry in advance of bead milling led to better stability than adding after bead milling. Adding phosphoric acid resulted in the higher stability. Using alumina C as an abrasive was good at stabilizing for $H_{2}O_{2}$.

• Journal of Internet Computing and Services
• /
• v.6 no.3
• /
• pp.55-70
• /
• 2005

In order to provide mobile hosts with multicast service in mobile communication environment, we proposed a multicast mechanism named HXcast++ which is an extended version of the existing Xcast++ with hierarchical architecture, We assured that mobile hosts could get multicast service through an optimal path regardless of their location by making DR(Designated Router) join a group on behalf of the mobile hosts, In this present research we introduced hierarchical architecture in order to reduce the maintenance cost resulting from frequent handoff. We also proposed a GMA (Group Management Agent) based group management mechanism which enables the mobile hosts to join the group without waiting for a new IGMP Membership Query. A fast handoff method with L2 Mobile Trigger was, in this work, employed in order to reduce the amount of the packet loss which occurs as a result of the handoff, We also managed to curtail the packet loss caused by the latency of the group join by using a buffering and forward mechanism.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.25-33
• /
• 1999

This paper proposes a handover algorithm for the mobile host in order to reduce the number of unnecessary retransmissions during handover. In our proposal, the home agent buffers user data after receiving the registration request message form the foreign agent and then transmits them again after a predefined time. We also analyze the packet disordering probability between two user data under an assumption that the home agent generates all user data. One of two user data is the one which has been generated just before the home agent receives the registration request message and the other is generated just after that. Simulation results show that our proposal provides efficient handover for a mobile host by reducing the packet disordering probalility.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.192-199
• /
• 2003

Trimethylglycine, commonly named betaine, is the most simple amphoteric molecule. It is completely vegetal (1,2), as it is produced in the sugar industry by industrial chromatography of molasses. While abundantly used in foods and diet supplements, many interesting applications in cosmetics have recently been investigated, like its capability to increase the volume and stability of foams in surfactant solutions. For its special chemical structure (it is the internal salt of a weak acid and a strong alkali) trimethylglycine is a solvent and buffering agent for strong acids and Lewis' acids. It allows to improve the efficiency of $\alpha$- and $\beta$-hydroxy acids in increasing the physiological rate of epidermal cell renewal, while keeping a low skin-irritation level. In oral care cosmetics, it acts as a mucous membrane protectant (3). For its special water co-ordination capability, its solubilising power, polymer swelling capability, after-feel improvement in hair products, skin moisturization and elasticity enhancing properties, trimethylglycine provides unusual characteristics to many products intended for skin maintenance (4).(omitted)