• Title/Summary/Keyword: buffer stabilization

Search Result 48, Processing Time 0.023 seconds

A Frame Skipping Transfer Policy for Server based on Clients Dynamic Buffer Control Signal (클라이언트의 동적 버퍼 제어 신호에 의한 서버의 프레임 생략 전송 정책)

  • Jeong, Hong-Seup;Park, Kyoo-Seok
    • The KIPS Transactions:PartA
    • /
    • v.10A no.6
    • /
    • pp.677-684
    • /
    • 2003
  • Most policies of VOD services are mainly studied about server system, and make no touch on clients buffer stabilization which is the basis of guaranteeing playback quality and playing without cut off. In this paper, we proposed a skipping frame transfer policy that can sending dynamic buffer control signal to server in accordance with clients buffer state of starvation or overrun, and server transfers a skipped frame to client after receive the control signal. And through a simulation, we show the suggested policy is more efficiency on playback quality by buffer stabilization which is by preventing loss and miss for receiving frame due to grow worse client buffer state.

A Frame Skipping Transfer Algorithm based on Network Load (네트워크 부하 기반 프레임 생략 전송 알고리즘)

  • 정홍섭;박규석
    • Journal of Korea Multimedia Society
    • /
    • v.6 no.7
    • /
    • pp.1209-1218
    • /
    • 2003
  • To guarantee client buffer stabilization and visual quality, the VOD service that provides real time video titles on requirements of numerous users, needs a mechanism which transfers frames with dropping or skipping algorithm by network condition. In this paper, we show an algorithm that transfers withdrawed skipped MPEG frames(I, P, B frame) from disk to client dependent on network load. Moreover, we verify through a simulation that adaptive dealing on network load can reduce the network load and stabilize client receiving buffer.

  • PDF

Preparation of Kerosine-Based Magnetic Ferrofluid by Steric Stabilizaton (Steric Stabilization에 의한 석유분산매 자성유체의 제조)

  • 신학기;장현명;김태옥
    • Journal of the Korean Ceramic Society
    • /
    • v.27 no.5
    • /
    • pp.684-692
    • /
    • 1990
  • Ultrafine magnetite powder for the ferromagnetic fluid was prepared by an addition of alkaline solution to the solution containing Fe2+ and Fe3+ ions at 6$0^{\circ}C$. The optimum condition of the magnetite synthesis was delineated by examining such various physico-chemical properties as Fe2+/Fe+3 ratio in the powder, phase characteristics, MHC and $\sigma$max. A new scheme for the steric stabilization of colloidal dispersion was proposed using the concept of the buffer group action for the increased interfacial density of the stabilizing moieties at colloid particle/dispersion medium interface. The proposed concept was successfully applied to the preparation of the kinetically stable kerosinebased ferrofluid using Tween and Span as dispersants. In the dispersion of magnetite particles in a kerosine, Tween(polyoxyethylene sorbitan oleate) acts as a primary stabilizer which provides an anchor group, whereas Span(sorbitan oleate) can be classified as a secondary stabilizer which adsorbs on the surface of magnetite particle through the action of the buffer group. Dispersion studies using various quantities of Tween and Span supported the concept of the buffer group action for increased dispersion characteristics of the kerosine based ferromagnetic fluid.

  • PDF

Polymer-Coated Liposomes for Oral Drug Delivery (I): Stability of Polysaccharide-Coated Liposomes Against Bile Salts (고분자 코팅을 이용한 경구용 리포좀의 개발(I): 다당체로 코팅된 리포좀의 담즙산염에 대한 안정성)

  • Choi, Young-Wook;Hahn, Yang-Hee
    • Journal of Pharmaceutical Investigation
    • /
    • v.22 no.3
    • /
    • pp.211-217
    • /
    • 1992
  • Stabilization of liposomes against degradation by bile salts has been investigated in order to develop a liposomal model system for oral drug delivery. Two polysaccharides, amylopectin (AP) and chitin (CT), were employed to coat both empty liposomes and bromthymol blue (BTB)-encapsulated liposomes by adsorption-coating techniques. Turbidity changes and BTB-release characteristics in pH 5.6 buffer solutions with or without bile salts, sodium cholate and sodium glycocholate, were observed to compare the differences between uncoated liposomes and polysaccharide-coated liposomes. Initial turbidities of both uncoated and polysaccharide-coated liposomes in buffer solution were kept constant within 3% range during 4 hours of experiments. But they were decreased in a different manner in bile salts-containing buffer solutions, showing 10% or less decrease for polysaccharide-coated liposomes and 25% or more decrease for uncoated liposomes. BTB release from uncoated liposomes has been greatly increased upto 90% after 4 hours in bile salts-containing buffer solution, which is a clue for breakdown of liposomal vesicles. However, polysaccharide-coated liposomes showed the controlled-release pattern which is proportional to square-root of time, followed by around 50% release for the same time period. Consequently, it is possible to conclude that these polysaccharide-coated liposomes might be an available system for oral delivery of a drug which is unstable in gut environment.

  • PDF

Voltage Feedback AMOLED Display Driving Circuit for Driving TFT Deviation Compensation (구동 TFT 편차 보상을 위한 전압 피드백 AMOLED 디스플레이 구동 회로)

  • Ki Sung Sohn;Yong Soo Cho;Sang Hee Son
    • Journal of the Semiconductor & Display Technology
    • /
    • v.22 no.4
    • /
    • pp.161-165
    • /
    • 2023
  • This paper designed a voltage feedback driving circuit to compensate for the characteristic deviation of the Active Matrix Organic Light Emitting Diode driving Thin Film Transistor. This paper describes a stable and fast circuit by applying charge sharing and polar stabilization methods. A 12-inch Organic Light Emitting Diode with a Double Wide Ultra eXtended Graphics Array resolution creates a screen distortion problem for line parasitism, and charge sharing and polar stabilization structures were applied to solve the problem. By applying Charge Sharing, all data lines are shorted at the same time and quickly positioned as the average voltage to advance the compensated change time of the gate voltage in the next operation period. A buffer circuit and a current pass circuit were added to lower the Amplifier resistance connected to the line as a polar stabilization method. The advantage of suppressing the Ringing of the driving Thin Film Transistor can be obtained by increasing the stability. As a result, a circuit was designed to supply a stable current to the Organic Light Emitting Diode even if the characteristic deviation of the driving Thin Film Transistor occurs.

  • PDF

A Study on the Linear Counting Ratemeter (선형 계수율계에 관한 연구)

  • 이병선
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.8 no.6
    • /
    • pp.8-16
    • /
    • 1971
  • This paper describes the transistorized linear counting ratemeter which can be uses to indicate on the meter or record the counting rates of the nuclear radiations produced from the atomic reactor or from the radio isotopes. Tte feature of this ratemeter is the use of the transistor chopper for good stabilization. At the input stage of the a. c. amplifier a composite emitter follower buffer stage has been used to give the high input impedance. A hybrid parameter equivalent circuit was modeled for the analysis of this buffer stage. The counting rates can be linearly measured from few CPS up to 100KCPS in 4 ranges. The resolution is less than 0.5$\mu$sec and the output drift at the room temperature with 7-hour continuous operation is in the order of $\pm$0.5$\mu$A.

  • PDF

Experiment on the Polish Condition of Needle Electrode on the Insulation Properties of Gas Mixtures (침전극 가공상태에 따른 혼합가스의 절연특성에 관한 실험)

  • Go, Yeon-Seong;Yeo, Dong-Goo;Seo, Ho-Joon;Lee, Dong-Hee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2006.11a
    • /
    • pp.339-340
    • /
    • 2006
  • AC spark discharge voltage of SF6/CO2and SF6/N2 containing various mixed rate in volume percent (1, 5 and 10%) of SF6 in non-uniform fields are investigated. The needle to plane electrode gap spacing was 5 and 10 mm, and the gas pressure was varied within the range of 0.1~0.7 MPa. We have observed a N-characteristic typical for the electronegative gases even in gas mixtures of 1% SF6 with CO2 and N2 as buffer gases. Especially, the materials of the needle electrode affect the insulation properties of the gas mixtures drastically. On the contrary to the case of needle electrodes made by mild steel or high carbon steel, the N-characteristics are hardly perceived in the case of stainless steel needle in this experiment.

  • PDF

Effect of Liposome on the Stabilization of Ascorbic Acid (Ascorbic Acid 의 안정성에 대한 Liposome 의 효과)

  • Lee, Yu-Weon;Hwang, Yong-Il;Lee, Seung-Cheol
    • Korean Journal of Food Science and Technology
    • /
    • v.31 no.2
    • /
    • pp.280-284
    • /
    • 1999
  • To overcome unstability of ascorbic acid, liposome was used to encapsulate it. Ascorbic acid was encapsulated with 46.8% efficiency inside soybean phosphatidyl choline liposomes by the dehydration-rehydration method. Stability of encapsulated ascorbic acid in liposome was enhanced compared to that in free aqueous solution. For example, most of ascorbic acid in acetate buffer (pH 5.0) was oxidized after 7 days, however, that in liposome was remained as reduced form with 22.8% after 40 days at same conditions. These results mean that encapsulation of ascorbic acid in liposome could provide protection tool for improvement in shelf life.

  • PDF

Stabilization of Tyrosinase for Catechol Production (Catechol생산을 위한 Tyrosinase의 안정화)

  • 박종현;김용환유영제이윤식
    • KSBB Journal
    • /
    • v.9 no.5
    • /
    • pp.525-531
    • /
    • 1994
  • Tyrosinase has two types of enzymatic activities, cresolase catalyzing the hydroxylation of monophenol and catecholase catalyzing the oxidation of o-phenol. Gradual inactivation of the enzyme during the reaction is a barrier to be overcome for the commercial application of the enzyme. Tyrosinase was stabilized by modifying the lysine residue of the enzyme using glutaraldehyde. In addition to that, tyrosinase was also stabilized by adapting the continuous reactor system. In packed bed reactor quinone could be easily removed, so the stability of tyrosinase increased. Borate buffer retarded the reaction rate of catechol to quinone and consequently decreased the tyroslnase inactivation. Tyrosinase immobilizer on controlled pore glass showed significantly enhanced stability in a packed-bed reactor.

  • PDF

Discharge Characteristics of SF6 Mixture Gases due to Processing Status of needle electrode under Non-Uniform Fields (불평등 전계 하에서의 침전극 가공상태에 따른 SF6혼합가스의 방전특성)

  • Go, Y.S.;Seo, H.J.;Rhie, D.H.
    • Proceedings of the KIEE Conference
    • /
    • 2006.10a
    • /
    • pp.198-199
    • /
    • 2006
  • AC spark discharge voltage of SF6/C02and SF6/N2 containing various mixed rate in volume percent (1, 5 and 10%) of SF6 in non-uniform fields are investigated. The needle to plane electrode gap spacing was 5 and 10 mm, and the gas pressure was varied within the range of 0.1${\sim}$0.7 MPa. We have observed a N-characteristic typical for the electronegative gases even in gas mixtures of 1% SF6 with CO2 and N2 as buffer gases. Especially, the materials of the needle electrode affect the insulation properties of the gas mixtures drastically. On the contrary to the case of needle electrodes made by mild steel or high carbon steel, the N-characteristics are hardly perceived in the case of stainless steel needle in this experiment.

  • PDF