• 한국동물위생학회지
• /
• 제33권2호
• /
• pp.97-103
• /
• 2010

Foot-and-mouth disease (FMD) commonly infects cloven-hoofed livestock animals such as cattle, pig, sheep, and goat and its clinical signs are well-known. Besides livestock, FMD can be transmitted among cloven-hoofed animals in the wild. FMD mostly affects livestock animals in farms, but, wild animals are likely to play a pivotal role in spreading the disease due to their way of free living. In the case of deer, the clinical signs of FMD vary widely from subclinical to severe infections. Thus, in some deer species, it may be hard to verify clinical signs of FMD. A deer may carry the virus up to 11 weeks after exposure, shedding the virus during the period. However, deer is not considered as a typical host for persistent infection like buffalo, cattle or sheep. In Korea, small-scale livestock farms which have less than 10 animals make up 63.6% of the entire livestock farms. Considering raising environment in deer farms, it is assumed that the risk of virus excretion and consequent transmission of FMD among deers is relatively lower than other cloven-hoofed animals. However, Sika deer and Elk which are typical deer species in Korea would manifest mild to subclinical symptoms upon FMD infection. Therefore, laboratory testing is necessary to confirm FMD in these animals because of difficulty in verifying clinical signs and the risk of virus shedding during inapparent infection.

• 한국비블리아학회지
• /
• 제23권2호
• /
• pp.109-132
• /
• 2012

본 연구는 저자 동시인용 데이터를 이용하여 커뮤니케이션 분야의 학자들간의 네트워크를 연구하였다. 저자 동시인용 분석이란 두 저자가 제 3의 다른 저자에 의해 동시에 인용되는 경우를 말하는데, 본 연구에서는 International Communication Association의 가장 대표적인 학술지인 Journal of Communication의 편집위원회를 그 대상으로 하였다. 저자동시인용 데이터는 좌우대칭의 매트릭스에 입력되고, 그 행렬에서 얻어지는 저자들의 위치도(network map)를 통해 각 저자들의 전문분야들이 위치도 안에서 어떻게 구분되는지, 또한 네트워크 상에서 어떤 저자들이 다른 저자들에 비해 중심적인 지 보여주는 데 이용된다. 기본적인 저자동시인용분석 외에도 두 매트릭스의 연관성을 비교하는 QAP 분석을 통해 어떠한 요인들이 커뮤니케이션 분야의 지식구조에 영향을 미치는 지 조사하였는데, 저자들의 교육적 배경이나 현재 소속된 기관보다는 각자의 전문분야가 더 많은 영향을 미치는 것으로 나타났다. 저자동시인용분석에 필요한 데이터는 Social Science Citation Index (SSCI) 데이터베이스를 통해 수집되었고, 저자들의 네트워크 지도는 UCInet이라는 프로그램을 이용하여 만들어졌다.

• 한국주거학회논문집
• /
• 제22권3호
• /
• pp.59-71
• /
• 2011

The purpose of this study is to investigate the basic historical characteristics and its modern trend of Torajan traditional housing architecture in Sulawesi Province, Indonesia. The Toraja culture belongs to the cosmological culture with Cosmos centric characteristics. A traditional house, being called 'tongkonan' in Toraja region, is more than just a structure, representing the symbol of family identity and tradition. The Torajan architecture is a combination of the myth and cosmos, also regional conditions. With a short description of the general conditions and spiritual values of the Toraja, this paper explains the space-composition, the stylistic characteristics, the ornamental elements, construction, and its modern trend, etc. In general, it is raised on stilts several metres high, with a dramatically boat-shaped roof. Village layout varies according to size. The houses are arranged in a row, side by side, with their front gables facing north. Each house stands opposite its own rice-barn. The houses with their oblong ground-plans, built on piles set on stones. The interior is divided into three or four rooms, having few window. The houses are embellished with carving and paintings, and the facades display engraved and painted geometric and figural designs. The most frequent motif is the buffalo head, ranging from the realistic to the highly stylized. The Torajan traditional housing have experienced radical changes during the Modern period. In spite of the popularity of new modern house-styles, the traditional architectural style is often now constructed as an icon of Toraja identity. This paper will be helpful for understanding regional diversity of the traditional housing in Southeast Asia.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.169-180
• /
• 2019

The underlying mechanism of the wind-induced vibration of the hangers of the suspension bridges is still not fully understood at present and hence is comprehensively examined in this study. More specifically, a series of field measurements on the No. 2 hanger of the Xihoumen Bridge was first carefully conducted. Large amplitude vibrations of the hanger were found and the oscillation amplitude of the leeward cable was obviously larger than that of the windward cables. Furthermore, the trajectory of the leeward cable was close to an ellipse, which agreed well with the major characteristics of wake-induced vibration. Then, a theoretical model for the wake-induced vibration based on a 3-D continuous cable was established. To obtain the responses of the leeward cable, the finite difference method (FDM) was adopted to numerically solve the established motion equation. Finally, numerical simulations by using the structural parameters of the No. 2 hanger of the Xihoumen Bridge were carried out within the spatial range of $4{\leq}X{\leq}10$ and $0{\leq}Y{\leq}4$ with a uniform interval of ${\Delta}X={\Delta}Y=0.25$. The results obtained from numerical simulations agreed well with the main features obtained from the field observations on the Xihoumen Bridge. This observation indicates that the wake-induced vibration might be one of the reasons for the hanger oscillation of the suspension bridge. In addition, the effects of damping ratio and windward cable movement on the wake-induced vibration of the leeward cable were numerically investigated.

• 지역연구
• /
• 제37권4호
• /
• pp.21-32
• /
• 2021

본 연구는 농촌진흥청에서 공적개발원조(Official Development Assistance; ODA) 사업의 일환으로 수행하는 해외농업기술개발사업(KOrea Program on International Agriculture; KOPIA)의 성과분석을 위해 아프리카 3개 지역을 대상으로 개별 추진 사업에 대한 설문조사를 실시하고 각 사업이 가지는 생산성 및 효과성 요인을 분석하였다. 각 국가별 현황에 따라 사업 참여 농가와 미 참여 농가 간 비교분석을 수행하였다. 분석결과에 따르면 시범사업 참여 농가의 생산 및 수익성이 미참여 농가에 대비하여 크게 개선된 것으로 파악되었으며, ODA 사업 참여 만족도 조사에서도 미참여 농가와 비교하여 크게 개선된 실적을 보였다. 본 연구는 아프리카 농업분야 ODA 사업의 성과분석에 주목하는 까닭에, 사업별 성과 및 경제성 분석 결과를 통해 사업운영 효과성 제고에 공헌할 수 있을 것으로 기대되며, 본 연구를 통해 ODA에 대한 성과적 측면에서 국민적 인식제고에 도움이 될 수 있을 것으로 보인다.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.41-47
• /
• 2019

PURPOSE. Surface finishing of a zirconia restoration is essential after clinical adjustment. Herein, we investigated the effects of a surface finishing protocol for monolithic zirconia on final roughness and bacterial adherence. MATERIALS AND METHODS. Forty-eight disk-shaped monolithic zirconia specimens were fabricated and divided into four groups (n = 12) based on initial surface treatment, finishing, and polishing protocols: diamond bur+polishing bur (DP group), diamond bur+stone grinding bur+polishing bur (DSP group), no diamond bur+polishing bur (NP group), and no diamond bur+stone grinding bur+polishing bur (NSP group). Initial and final surface roughness was measured with a profilometer, and shown using scanning electron microscope. Bacterial adhesion was evaluated by quantifying Streptococcus mutans in the biofilm. Kruskal-Wallis and Mann-Whitney U tests were used to compare results among groups, and two-way analysis of variance was used to evaluate the effects of grinding burs on final roughness (${\alpha}=.05$). RESULTS. The DP group had the highest final Ra value, followed by the DSP, NP, and NSP groups. Use of the stone grinding bur as a coarse-finishing step significantly decreased final Ra values when a diamond bur was used (P<.001). Omission of the stone grinding bur increased biofilm formation on specimen surfaces. Combining a stone grinding bur with silicone polishing burs produced the smallest final biofilm values, regardless of the use of a diamond bur in initial surface treatment. CONCLUSION. Coarse finishing of monolithic zirconia with a stone grinding bur significantly decreased final Ra values and bacterial biofilm formation when surfaces had been roughened by a diamond bur.

• The Journal of Advanced Prosthodontics
• /
• 제11권5호
• /
• pp.280-285
• /
• 2019

PURPOSE. The present study was designed to examine the clinical fit of fixed dental prosthesis fabricated by the milling-sintering method using a presintered cobalt-chromium alloy. MATERIALS AND METHODS. Two single metal-ceramic crowns were fabricated via milling-sintering method and casting method in each of the twelve consecutive patients who required an implant-supported fixed prosthesis. In the milling-sintering method, the prosthetic coping was designed in computer software, and the design was converted to a non-precious alloy coping using milling and post-sintering process. In the casting method, the conventional manual fabrication process was applied. The absolute marginal discrepancy of the prostheses was evaluated intraorally using the triple-scan technique. Statistical analysis was conducted using Mann-Whitney U test (${\alpha}=.05$). RESULTS. Eight patients (66.7%) showed a lower marginal discrepancy of the prostheses made using the milling-sintering method than that of the prosthesis made by the casting method. Statistically, the misfit of the prosthesis fabricated using the milling-sintering method was not significantly different from that fabricated using the casting method (P=.782). There was no tendency between the amount of marginal discrepancy and the measurement point. CONCLUSION. The overall marginal fit of prosthesis fabricated by milling-sintering using a presintered alloy was comparable to that of the prosthesis fabricated by the conventional casting method in clinical use.

• Journal of Periodontal and Implant Science
• /
• 제48권6호
• /
• pp.395-404
• /
• 2018

Purpose: The purpose of this study was to propose a technique for periodontal biotype modification through thickening of the entire facial aspect using a volume-stable collagen matrix and autogenous subepithelial connective tissue graft (CTG) for the treatment of gingival recession. Methods: Four systemically healthy patients showing Miller class I or class II gingival recession in the mandibular incisor area were included in this study. Full-mouth scaling and root planing procedures were performed at least 4 weeks prior to periodontal plastic surgery. A split-thickness flap with a horizontal intrasulcular incision and 2 vertical incisions was used in cases 1-3, and the modified tunnel technique was used in case 4 for coronal advancement of the mucogingival complex. After the exposed root surfaces were debrided thoroughly, double-layered volume-stable collagen matrix was placed on the apical part of the recession and a subepithelial CTG harvested from the palatal area was placed on the coronal part. The amount of root coverage at 3 months postoperatively was evaluated in cases 1-3, and facio-lingual volumetric changes were analyzed in cases 1 and 2. Results: Healing was uneventful in all 4 cases and complete root coverage was shown in cases 1-3. In case 4, reduction of gingival recession was observed at 3 months after surgery. In cases 1 and 2, a comparison of stereolithographic files from the preoperative and postoperative time points demonstrated that the entire facio-lingual volume had increased. Conclusions: The surgical technique suggested herein, using a volume-stable collagen matrix and autogenous subepithelial CTG, may be an effective method for periodontal biotype modification through thickening of the entire facial aspect for the treatment of gingival recession.

• Journal of Animal Science and Technology
• /
• 제64권6호
• /
• pp.1013-1023
• /
• 2022

Body condition score (BCS) at calving is a vital indicator of the effectiveness of the beginning of lactation in dairy animals. The purpose of this study was to examine the effect of BCS at calving on milk production and transition success in dairy buffaloes. Thirty-six (36) Nili Ravi buffaloes were enrolled at 40 days of expected calving and followed through 90 days of lactation. The buffaloes were categorized into three groups according to their BCS (on a scale of 1-5 with 0.25 increments) as follows: 1) low, buffaloes with BCS ≤ 3.0; 2) medium, buffaloes with BCS 3.25-3.5; and 3) high, buffaloes with BCS ≥ 3.75. All buffaloes were fed a similar diet ad libitum. The lactation diet had increased concentrate allowance according to milk yield. The results revealed that the BCS at calving did not affect milk yield; however, fat percentage (fat%) was lower in the low-BCS group. Dry matter intake (DMI) was similar among the treatment groups, although post-calving BCS loss was greater in the high-BCS group compared to the medium- and the low-BCS groups. Similarly, the buffaloes in the high-BCS group had higher non-esterified fatty acids (NEFA) concentration compared to the low- and medium-BCS groups. No cases of metabolic disorders were observed during the study. The present results suggest that the buffaloes in the medium-BCS group appeared to perform better compared to the low- and the high-BCS groups with respect to milk fat% and blood NEFA concentration.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.10.1-10.11
• /
• 2022

Objectives: This study aimed to investigate the color stability, solubility, and surface characteristics of 3 calcium silicate-based cements (CSCs) after immersion in different solutions. Materials and Methods: ProRoot white mineral trioxide aggregate (MTA), Biodentine, and Endosequence Root Repair Material (ERRM) were placed in cylindrical molds and stored at 37℃ for 24 hours. Each specimen was immersed in distilled water, 5% sodium hypochlorite (NaOCl), 2% chlorhexidine, or 0.1% octenidine hydrochloride (OCT) for 24 hours. Color changes were measured with a spectrophotometer. Solubility was determined using an analytical balance with 10^-5 g accuracy. The surface characteristics were analyzed using scanning electron microscopy and energy-dispersive spectroscopy. Data were analyzed using 2-way analysis of variance, the Tukey test, and the paired t-test. Results: MTA exhibited significant discoloration in contact with NaOCl (p < 0.05). White precipitation occurred on the surfaces of Biodentine and ERRM after contact with the solutions, and none of the materials presented dark brown discoloration. All materials showed significant solubility after immersion in the solutions (p < 0.05), irrespective of the solution type (p > 0.05). The surface topography and elemental composition of the samples showed different patterns of crystal formation and precipitation depending on the solution type. Conclusions: All materials presented some amount of solubility and showed crystal precipitation after contact with the solutions. Biodentine and ERRM are suitable alternatives to ProRoot MTA as they do not exhibit discoloration. The use of OCT can be considered safe for CSCs.