• Structural Engineering and Mechanics
• /
• 제26권6호
• /
• pp.673-685
• /
• 2007

Reinforced concrete beams can be strengthened in a structural retrofit process by attaching steel plates to their sides by bolting. Whilst bolting produces a confident degree of shear connection under conditions of either static or seismic overload, the plates are susceptible to local buckling. The aim of this paper is to investigate the local buckling of unilaterally-restrained plates with point supports in a generic fashion, but with particular emphasis on the provision of the restraints by bolts, and on the geometric configuration of these bolts on the buckling loads. A numerical procedure, which is based on the Rayleigh-Ritz method in conjunction with the technique of Lagrange multipliers, is developed to study the unilateral local buckling of rectangular plates bolted to the concrete with various arrangements of the pattern of bolting. A sufficient number of separable polynomials are used to define the flexural buckling displacements, while the restraint condition is modelled as a tensionless foundation using a penalty function approach to this form of mathematical contact problem. The additional constraint provided by the bolts is also modelled using Lagrange multipliers, providing an efficacious method of numerical analysis. Local buckling coefficients are determined for a range of bolting configurations, and these are compared with those developed elsewhere with simplifying assumptions. The interaction of the actions in bolted plates during buckling is also considered.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.60-66
• /
• 1999

This study is to develop design sensitivity analysis method based on continuum theory for the actual buckling load of vehicle passenger compartment with respect to sizing design variables. For nonlinear structural analysis, both geometric and material nonlinear effects are considered. The total Lagrangian formulation for incremental equilibrium analysis and one-point linear eigenvalue problem for buckling analysis are utilized. Numerical methods are presented to evaluate design sensitivity expressions, using structural analysis results from FEM code. Optical design of vehicle passenger compartment with buckling constraint solved using Gradient projection method.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.1-8
• /
• 1995

This work presents a new method to deal with buckling constraints. The mathematical optimization process of truss structures proposed earlier by the author has been proved to be the most rigorous method. The inclusion of buckling constraints, however, gives rise to a new problem The allowable compression stress of a member changes from one design iteration to another. This changing stress limit creates a good deal of noise in selecting active constraints and makes the solution process unstable. This problem can be overcome by introducing relaxation parameters. This work, however, aims at establishing a more rigorous method by containing the allowable compression stress in the left hand side of the associated constraint.

• 한국지능시스템학회논문지
• /
• 제5권3호
• /
• pp.11-35
• /
• 1995

본 논문에서는 학습/적응능력을 갖는 퍼지제어시스템들이 여러가지 관점에서 고찰되었다. 먼저, 기존에 제안된 다양한 학습/적응 퍼지제어시스템들의 기본적인 구성요소들을 바탕으로하여 이러한 시스템들의 일반적인 구조를 제안하였다. 그리고 제안된 구조의 중요한 구성요소들을 중심으로 고찰기준을 설정하였다. 고찰기준으로는 퍼지제어기나 퍼지모델 등에 사용되는 퍼지추론시스템의 구조, 학습/적응에 사용되는 퍼지추론시스템의 조정계수와 제어성능 평가함수, 그리고 학습/적응알고리즘을 설정하였다. 다음으로, 이러한 고찰기준들을 바탕으로하여 학습/적응 퍼지제어시스템들을 분류하고 각각의 특징들을 고찰하였다. 마지막으로, 사용된 퍼지추론시스템들의 범용 함수근사화 성질에 대하여도 알아 보았다.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.949-954
• /
• 2013

일반적으로 압축을 받는 판 구조는 종방향 보강재를 이용하여 보강된다. 이 때 보강재로서 U형 단면 리브를 사용하는 것이 보다 효과적이나, 현재 국내에서 이에 대한 명확한 설계지침이나 연구자료가 제시되지 못하고 있다. 이에, 본 연구에서는 U리브의 단면 크기 및 강성 등에 따른 보강판의 탄성좌굴강도를 살펴보고자 한다. 유한요소해석 프로그램인 ABAQUS를 이용하여 세 가지 타입의 U형 단면 리브를 적용한 해석모델을 수립하여 고유치 해석을 실시하였고, 양연지지된 판의 국부좌굴강도 이론식과 본 해석적 결과를 비교하였다. 이러한 분석 결과를 토대로 U형 단면리브에 의해 좌굴강도가 증진하는 보강 효과를 확인하였으며, 설계 파라미터에 따른 변수해석적 연구를 통해 그 영향을 분석하였다. 본 연구결과는 U리브 보강판의 적정 설계 방안을 제시하는데 기여할 수 있을 것으로 기대된다.

• Earthquakes and Structures
• /
• 제26권4호
• /
• pp.261-267
• /
• 2024

With the increase in the exploitation depth of offshore oil and gas, it is possible to control the global buckling of deep-sea pipelines by the snake lay method. Previous studies mainly focused on the analysis of critical buckling force and critical temperature of pipelines under the snake-like laying method, and pipelines often suffer structural failure due to seismic disasters during operation. Therefore, seismic action is a necessary factor in the design and analysis of submarine pipelines. In this paper, the seismic action of steel pipes in the operation stage after global buckling has occurred under the active control method is analyzed. Firstly, we have established a simplified finite element model for the entire process cycle and found that this modeling method is accurate and efficient, solving the problem of difficult convergence of seismic wave and soil coupling in previous solid analysis, and improving the efficiency of calculations. Secondly, through parameter analysis, it was found that under seismic action, the pipe diameter mainly affects the stress amplitude of the pipeline. When the pipe wall thickness increases from 0.05 m to 0.09 m, the critical buckling force increases by 150%, and the maximum axial stress decreases by 56%. In the pipe soil interaction, the greater the soil viscosity, the greater the pipe soil interaction force, the greater the soil constraint on the pipeline, and the safer the pipeline. Finally, the pipeline failure determination formula was obtained through dimensionless analysis and verified, and it was found that the formula was accurate.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.160-167
• /
• 2004

The correlation between the object function and the design parameter is shown on this paper by using the characteristic function for the mixed result of the structural analysis, the buckling analysis and the table of orthogonal array according to the original overhead crane's dimensional change. About the above two functions, the effectiveness of design change according to the change of design parameters could be estimated. Also, the overhead crane's weight is reduced up to 10.55 percent maintaining the structural stability according to the thickness of plate.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.12-17
• /
• 2006

This study uses a characteristic function to explain correlations between the objective function and design variables. For the use, structural analysis and buckling analysis are carried out. the dimensional change of an original overhead crane is made based on the table of orthogonal array. For two functions or more, the effectiveness of design change can be evaluated in accordance with change in design parameters. Also, the overhead crane's weight is reduced by up to 10.55 percent while its structural stability maintained.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2005년도 춘계학술발표회 및 정기총회 2권1호(통권2호)
• /
• pp.236-245
• /
• 2005

This paper was developed the discrete optimum design program by the refined fuzzy-genetic algorithms based on the genetic algorithms and fuzzy theory. The optimum design of this paper can perform both size and shape optimum design for planar and spacial steel structures. In this paper, the objective function is the weight of steel structures and the constraints are the design limits defined by design and buckling strengths, displacements and thicknesses. The design variables are dimensions and coordinates of steel sections. Design examples are given to show the applicability of the discrete optimum design program of this paper.

• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.273-288
• /
• 2015

As one of the most common failure types of arch bridges, stability is one of the critical aspects for the design of arch bridges. Using 3D finite element model in ABAQUS, this paper has studied the stability performance of an arch bridge with inclined arch ribs and hangers, and the analysis also took the effects of geometrical and material nonlinearity into account. The impact of local buckling and residual stress of steel plates on global stability and the applicability of fiber model in stability analysis for steel arch bridges were also investigated. The results demonstrate an excellent stability of the arch bridge because of the transverse constraint provided by transversely-inclined hangers. The distortion of cross section, local buckling and residual stress of ribs has an insignificant effect on the stability of the structure, and the accurate ultimate strength may be obtained from a fiber model analysis. This study also shows that the yielding of the arch ribs has a significant impact on the ultimate capacity of the structure, and the bearing capacity may also be approximately estimated by the initial yield strength of the arch rib.