• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.45.1-45.1
• /
• 2008

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.111.2-111.2
• /
• 2010

삼상슬러리 기포탑 반응기의 설계 및 Scale-up을 위하여 기포탑의 직경변화에 따른 기체-슬러리 계면에서의 물질전달 현상의 Similarity를 검토하고, 기체-슬러리 계면에서의 물질전달 현상과 슬러리 기포탑 반응기의 운전변수 및 반응물들의 물성들과의 연관성을 고찰하기 위하여 삼상슬러리 기포탑의 물질전달계(System)에서 주요 파라메타를 도출하였으며, 이들 파라메터들을 이용하여 슬러리 기포탑반응기의 물질전달 Scaling을 검토하였다. 물질전달계의 주요제어인자로는 기체-액체 부피물질전달계수($k_La$), 슬러리상의 확산도($D_{SL}$), 기포탑의 직경(D), 기포탑 반응기에 유입되는 기체의 유입속도($U_G$), 기포탑 반응기 내부의 연속상인 슬러리상의 표면장력(${\sigma}_{SL}$), 슬러리상과 기체상간의 밀도차(${\rho}_{SL}-{\rho}_G$) 그리고 슬러리상의 점도(${\mu}_{SL}$)등 슬러리 상의 물성을 선정하였으며 중력가속도(g)를 선정하였다. 물질전달계의 Scling을 검토하기위하여 이를 재구성하였으며 기포탑 반응기의 구조와 직경이 변화함에 따라 이들 무차원군의 변화양상을 고찰하였다. 실험적으로 측정된 물질전달계수와 Scaling에 의해 예측된 물질전달계수를 비교 검토함으로써 본 연구의 Correlation의 적용범위를 제시하였다.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4213-4227
• /
• 2023

Computer Automated Radioactive Particle Tracking (CARPT) technique has been successfully utilized to measure the velocity profiles and mixing parameters in different multiphase flow systems where a single radioactive tracer is used to track the tagged phase. However, many industrial processes use a wide range of particles with different physical properties where solid particles could vary in size, shape and density. For application in such systems, the capability of current single tracer CARPT can be advanced to track more than one particle simultaneously. Tracking multiple particles will thus enable to track the motion of particles of different size shape and density, determine segregation of particles and probing particle interactions. In this work, a newly developed Multiple Radioactive Particle Tracking technique (M-RPT) used to track two different radioactive tracers is demonstrated. The M-RPT electronics was developed that can differentiate between gamma counts obtained from the different radioactive tracers on the basis of their gamma energy peak. The M-RPT technique was validated by tracking two stationary and moving particles (Sc-46 and Co-60) simultaneously. Finally, M-RPT was successfully implemented to track two phases, solid and liquid, simultaneously in three phase slurry bubble column reactors.

• 한국건축시공학회지
• /
• 제13권6호
• /
• pp.513-521
• /
• 2013

This study aimed to examine whether heat curing methods of concrete subjected to $-10^{\circ}C$ could be effective by varying the combination of heating cable and surface heat insulations. Three different concrete specimens incorporating 30% fly ash with 50% W/B were fabricated to simulate wall, column and slab members with dimensions of $1600{\times}800{\times}200$ mm for slab, $800{\times}600{\times}200$ mm for wall and $800{\times}800{\times}800$ mm for column. For heat curing combinations, Type-1 specimens applied PE film for slab, plywood for wall and column curing. Type-2 specimens applied double layer bubble sheet (2LB) and heating coil for slab, and 50 mm styrofoam for wall and column curing. Type-3 specimen applied 2LB for slab, electrical heating mat for wall and column inside heating enclosure. The test results revealed that the temperature of Type 1 specimen dropped below $0^{\circ}C$ beginning at 48 hours after placement due to its poor heat insulating capability. Type 2 and 3 specimens maintained a temperature of around $5{\sim}10^{\circ}C$ after placement due to favorable heat insulating and thermal resistance.

• 한국미생물·생명공학회지
• /
• 제25권1호
• /
• pp.68-74
• /
• 1997

The conversion of D-sorbitol to L-sorbose by Gluconobater suboxydans was analyzed, and continuous production of L-sorbose was carried out in immobilized cell reactors. L-Sorbose production by high densities of resting cells was more effective than by conventional batch fermentations. Sorbitol dehydrogenase, an enzyme converting D-sorbitol to L-sorbose, did not suffer from substrate inhibition, but from product inhibition. When L-sorbose production was carried out with Ca-alginate-immobilized cells, about 60 g/l of L-sorbose was obtained. On the other hand, when the corn steep liquor (CSL) concentration of medium was reduced to 0.08%, 80 g/l of L-sorbose was obtained. Outgrowth inside the immobilized carriers was thought to block the pores of the carriers so that substrate could not easily diffuse through the carriers. Continuous production of L-sorbose was well accomplished in a bubble column reactor, and 6. 5 g/l.h of productivity and 81.2% of yield were obtained at a substrate feeding rate of 0.08h$^{-1}$ under the optimum conditions with carrier volume of 55% and aeration rate of 3 vvm.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.727-733
• /
• 2009

슬러리 기포탑에서 침강성 탄산칼슘의 평균입도와 모폴로지의 변화에 대한 수산화칼슘의 농도(0.16~0.64 wt%), 총 부피유량(3~6 L/min) 및 이산화탄소의 부피분율(0.3~0.6)의 영향을 나타내었다. 실험에 사용한 반응기는 높이가 1.0 m, 직경이 0.11 m이고 중앙에는 직경 4 cm인 튜브가 들어있는 슬러리 기포탑이다. 반응 시간에 따른 수산화칼슘의 전화율을 구하기 위해 FT-IR을 이용하여 수산화칼슘과 탄산칼슘 함량비에 따른 검량곡선을 구하였다. 수산칼슘의 포화농도인 0.16 wt%에서 이산화탄소의 유량에 따른 침강성 탄산칼슘의 모폴로지를 살펴보면 반응 속도가 증가할수록 결정 크기는 증가하는 경향을 보이며 결정의 형태는 단일 결정으로 존재하는 입자들이 많아졌다. 또한 수산화칼슘의 농도가 증가할수록 결정 크기는 감소하지만 입자들간의 응집에 의해 탄산칼슘의 평균 입도는 증가하는 것을 확인하였다.

• 한국물환경학회지
• /
• 제20권1호
• /
• pp.78-85
• /
• 2004

As an ozone contactor, we newly adopted HJLR (High-performance Jet Loop Reactor) for the decolorization of Reactive black 5 and the mineralization of oxalic acid, which has been applied exclusively in biological wastewater treatments and well-known for high oxygen transfer characteristics. The ozonation efficiency for organic removals and ozone utilization depending on the mass transfer rate were compared to those of Stirred bubble column reactor, which was controlled by varing energy input in the HJLR and Stirred bubble column reactor. The results were as follows; first, the decolorization rate of Reactive black 5 in the HJLR reactor was nearly proportional to the increasing $k_La$. When the $k_La$ was increased by 25 % from $13.0hr^{-1}$ to $16.4hr^{-1}$, 30 % of the k' (apparent reaction rate constant) was increased from 0.1966 to $0.2665min^{-1}$ (Stirred bubble column; from 0.1790 to $0.2564min^{-1}$). Ozone transfer was found to be a rate-determining step in decolorizing Reactive black 5, which was supported by that no residual ozone was detected in all of the experiments. Second, the mineralization of oxalic acid was not always proportional to the increasing $k_La$ in the RJLR reactor. The rate-determining step for this reaction was OH(OH radical) production with ozone transfer, because residual ozone was always detected during the ozonation of oxalic acid in contrast with Reactive black 5. This result indicates that the increase of $k_La$ in the HJLR reactor is beneficial only when there are in ozone transfer limited regions. In addition, regardless of $k_La$, the mineralization of oxalic acid was nearly accomplished within 60 minutes. It was interpreted as that the longer staying of residual ozone by whirling liquid in the HJLR reactor contributed to an high ozone utilization(83-94%), producing more OR radicals.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.465-469
• /
• 2009

산소-공융염(LiCl-KCl) 기포탑에서 4종의 희토류염화물($Ce/Nd/Pr/EuCl_3$)의 산화반응 특성에 대한 연구를 수행하였다. HSC Chemistry software를 이용한 모델링 결과 산소 및 희토류염화물이 존재하는 계에서 가장 안정된 화합물은 옥시염화물(EuOCl, NdOCl, PrOCl)과 산화물($CeO_2$, $PrO_2$)이었으며, 이러한 결과는 옥시염화물 및 산화물이 형성되는 반응의 Gibbs 자유에너지 경향성과도 일치하였다. 실험결과 공융염 내에서 산소와 희토류염화물과의 반응으로 산소분산 시간 및 공융염 온도와 상관없이 Eu, Nd, Pr은 옥시염화물로, Ce, Pr은 산화물형태의 침전물로 형성되었으며, 이러한 결과는 열역학적 데이터를 이용한 모델링 결과와 일치하였다. 4종의 복합희토류 침전물은 등방형태와 정방형태의 침전물로 구분되었는데 주사전자현미경(SEM-EDS) 분석결과 등방구조(cubic structure) 형태의 침전물은 산화물이었고, 정방형 구조(tetragonal structure)의 침전물은 옥시염화물이었다. 실험에 사용된 4종의 희토류염화물의 공융염에 불용성인 침전물로의 전환효율은 온도 및 분산시간이 증가하면 증가하였으며, Ce가 가장 빠른 반응특성을 나타내었다. $650^{\circ}C$의 공융염 온도 및 420분의 산소분산시간 조건에서 4종의 희토류염화물의 산화효율은 모두 99% 이상이었다.

• 한국안전학회지
• /
• 제9권3호
• /
• pp.67-73
• /
• 1994

The gas holdup and volumeteric liquid phase mass transfer coefficient with the variation of the concentration of CMC aqueous solution, gas velocity, diameter and area of the draught tube were investigated. As the results of the experiments, the gas holdup and volumetric liquid phase mass transfer coefficient decreased with decreasing the concentration of CMC aqueous solution, increased with increasing the gas velocity and increased with increasing the circulated area ratio of the draught tube.

• 한국환경보건학회지
• /
• 제23권1호
• /
• pp.74-80
• /
• 1997

This study was performed to estimate the ozonation characteristics of phenol wastewater with increasing pH in the continuous packed column reactor (PCR) and the bubble column reactor (BCR). Among various influencing factors that affect phenol on decomposition through the ozonation, pH was chosen as reaction parameter. Upon increasing pH from 3 to 9, the phenol removal efficiency in PCR was improved approximately by 17% while in BCR approximately by 19.2%. The improvements in the phenol removal efficiency by increasing pH caused the enhancements in ozone utilization efficiency reaching almost 100% in PCR at pH 9. In conclusions, ozone has latent power for phenol wastewater treatment, and the performance of PCR was superior to that of BCR in the aspects of phenol removal and ozone utilization efficiency.