• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.430-432
• /
• 2008

Visible channel calibration method using deep convective clouds (DCCs) is developed. The method has advantages that visible radiance is not sensitive to cloud optical thickness (COT) for deep convective clouds because visible radiance no longer increases when COT exceeds 100. Therefore, once DCCs are chosen appropriately, and then cloud optical properties can be assumed without operational ancillary data for the specification of cloud conditions in radiative transfer model. In this study, it is investigated whether IR measurements can be used for the selection of DCC targets. To construct appropriate threshold value for the selection of DCCs, the statistics of cloud optical properties are collected with MODIS measurements. When MODIS brightness temperature (TB) at 11 ${\mu}$ m is restricted to be less than 190 K, it is shown that more than 85% of selected pixels show COT ${\geq}$ 100. Moreover, effective radius ($r_e$) distribution shows a sharp peak around 20 ${\mu}m$. Based on those MODIS observations, cloud optical properties are assumed as COT = 200 and $r_e$ = 20 ${\mu}m$ for the simulation of MODIS visible (0.646 ${\mu}m$) band radiances over DCC targets.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.89-95
• /
• 1994

BaTiO$_{x}$ thin film as insulator and ZnS:Mn film as phosphour layer for thin film electrouminescent device have been deposited by thermal evalporation and dependence of electrical and opeical characeristics have been studied. The optimum deposition conditions for the BaTiO$_{x}$ thin film are such that BaTiO$_{3}$/TiO$_{2}$ mixing ratio was 0.7, sub strate temperature was 100 $^{\circ}C$ and annealing time was 1 hour at 300 $^{\circ}C$. In this case, the dielectric constant of BaTiO$_{x}$ thin film fabricated under those optimum conditions was 26, and for AnS:Mn thin films, the crystallization was done well and the deposition rate was 1300 $\AA$/min when substrate temperature was 200$^{\circ}C$. Thin film Electroluminescent devices were fabricated using BaTiO$_{x}$ and AnS:Mn thin films. The luminescence threshold voltage of device was 41.5 V and brightness was 1.2${\mu}W/cm^{2}$ at appied voltage of 50 V.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.121-127
• /
• 1994

The capability for application of rf magnetron sputterred and post annealed BaTiO$_{3}$ thin films in dielectrics AC drived TFELD(thin film electroluminescent device) was investigated. The dielectric constant of the thin films slightly increased up to about 25 with increase fothe post annealing temperature in the range of 210$^{\circ}C$-480$^{\circ}C$. The dielectric loss was about 0.005-0.01 except for the high frequency range above 100kHz and nearly independent on post annealing temperature. The BaTiO$_{3}$ thin film used for TFELD was annealed at 480.deg. C and Si$_{3}$N$_{4}$ thin film was inserted between BaTiO$_{3}$, lower dielecrics and ZnS:Mn, phosphor layer for stable driving of the device and for fear of interdiffusion. Regardless of the frequency of the applied sine wave voltage, the threshold voltage of the prepared TFELD was 65volt and saturated brightness was about 3000cd/m$^{2}$ at 130volt(2kHz sine wave), 65volt above V$_{TH}$.

• Atmosphere
• /
• v.21 no.3
• /
• pp.285-300
• /
• 2011

To discriminate and eliminate chaff echoes in radar measurements, a new removal algorithm in two-dimensional reflectivity composite at the height of 1.5 km has been developed by using the brightness temperature($T_B$) obtained from MTSAT-1R. This algorithm utilizes the fact that chaffs are not appeared in infrared satellite data of MTSAT-1R, but detected in radar measurements due to their significant backscattering in the given radar wavelength. The algorithm is evaluated for three different situations: chaff only, chaff mixed with convective storms, and chaff covered with clouds. The algorithm shows excellent performance for the cases of chaff only and chaff mixed with convective storms. However, the performance of the algorithm significantly depends on the presence of clouds. Thus, the statistical analysis of $T_B$ is performed in order to optimize the monthly threshold.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1077-1080
• /
• 2009

In this paper, we propose a new method for measuring image sticking of an OLED display using a human visual test. We determined that the perceptual image sticking threshold is 2% of luminance difference at 200 nits and 1% at 100 nits, respectively. Color shift must also be considered when evaluating image sticking, as a ${\Delta}$(u', v') shift of just over 0.002 can be recognized regardless of background brightness. Perception of image sticking is affected by the background level, test pattern, and ambient illumination conditions. The evaluation standard must consider both luminance variation and color shift simultaneously.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.866-872
• /
• 2004

In fingerprint verification and identification, fingerprint and background region should be segmented. For this purpose, most systems obtain variance of brightness of X and Y direction using Sobel mask. To decide given local region is background or not, the variance is compared with a certain threshold. Although this method is simple, most fingerprint image does not separated with two region of fingerprint and background region. In this paper, we presented a new segmentation algorithm based on run-length connectivity analysis. For a given binary image after thresholding, suggested algorithm calculates RL of X and Y direction. Until the given image is segmented to two regions, small run region is successively inverted. Experimental result show that this algorithm effectively separates fingerprint region and background region.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1266-1268
• /
• 1996

In this study an automatic roiling-coli labeling system using robot vision system and peripheral mechanism is proposed and implemented, which instead of the manual labor to attach labels Rolling-coils in a steel miil. The binary image process for the image processing is performed with the threshold, and the contour line is converted to the binary gradient which detects the discontinuous variation of brightness of rolling-coils. The moment invariants algorithm proposed by Hu is used to make it easy to recognize even when the position of the center are different from the trained data. The position error compensation algorithm of six degrees of freedom industrial robot manipulator is also developed and the data of the position of the center rolling-coils, which is obtained by floor mount camera, are transfered by asynchronous communication method. Therefore even if the position of center is changed, robot moves to the position of center and performs the labeling work successfully. Therefore, this system can be improved the safety and efficiency.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.24-31
• /
• 2010

Laser carbonization of a polymer layer can be employed in various applications in the microelectronics industry, e.g repairing brightness pixels of an LCD panel. In this work, the process of thermal degradation of LCD color filter polymer by various laser sources with pulsewidths from CW to fs is studied. LCD pixels are irradiated by the lasers and the threshold irradiance of LCD color filter polymer carbonization is experimentally measured. In the numerical analysis, the transient temperature distribution is calculated and the number density of carbonization in the polymer layer is also estimated. It is shown that all the lasers can carbonize the polymer layers if the output power is adjusted to meet the thermal conditions for polymerization and that pulsed lasers can result in more uniform distribution of temperature and carbonization than the CW laser.

• Journal of The Korean Astronomical Society
• /
• v.53 no.6
• /
• pp.125-138
• /
• 2020

We determine the observing sites for eclipses of large magnitude recorded in ancient Chinese chronicles from 200 BCE to 900 CE, by adopting the difference between terrestrial time and universal time, ΔT, given by Morrison & Stephenson (2004). The records of solar eclipses with large magnitude are divided into four groups in accordance with the historical variations of the capital cities of ancient Chinese dynasties. We determine areas in which all the eclipses in each group, with an eclipse magnitude larger than a certain threshold value, could be observed. We find that these areas coincide with the historical capitals, which agrees with the general idea that the solar eclipses were observed at the capital of each dynasty. This result also verifies the ΔT values during the period from 100 BCE to 400 CE, during which historical records of eclipses are so rare that the ΔT values can only be obtained by interpolating the long-term data. Moreover, we show that the eclipses described by the term Ji in East-Asian history are not all total eclipses; their mean magnitude is 0.96 ± 0.04. We find that complementary expressions, such as dark daytime and appearance of stars during the eclipse, strengthen the possibility that eclipses described by the term Ji were total. We also provide quantitative definitions for expressions such as 'being not complete and like a hook', 'being almost complete', 'visibility of stars during the eclipse', and 'darkness during an eclipse.' The literal meanings of these expressions are in agreement with the recent physical modeling of sky brightness during total eclipses provided by Können & Hinz (2008).

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.131-137
• /
• 2022

Crimes related to illegal cameras are steadily increasing and causing social problems. Owing to the development of camera technology, the miniaturization and high performance of illegal cameras have caused anxiety among many people. This study is for detecting hidden cameras effectively such that they could not be easily detected by human eyes. An image sensor-based module with 940 nm wavelength infrared detection technology was developed, and an image processing algorithm was developed to selectively detect illegal cameras. Based on the Android smartphone environment, image processing technology was applied to an image acquired from an infrared camera, and a detection sensor module that is less sensitive to ambient brightness noise was studied. Experiments and optimization studies were conducted according to the Gaussian blur size, adaptive threshold size, and detection distance. The performance of the infrared image-based illegal camera detection sensor module was excellent. This is expected to contribute to the prevention of crimes related to illegal cameras.