• 제목/요약/키워드: brightness control

검색결과 420건 처리시간 0.027초

모바일 제품의 효율적인 LCD 밝기 조절 기법에 관한 연구 (A Study on the Efficient Technique of LCD Brightness Control in the Mobile System)

  • 김종대;박영준;김영길
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 춘계학술대회
    • /
    • pp.451-454
    • /
    • 2009
  • 모바일 기기가 오디오 플레이 기능 이외에 비디오 플레이, 게임, 웹 브라우징 등 멀티미디어 기능이 강화 되면서 LCD 디스플레이 사이즈와 해상도가 점차 커지고 높아지고 있다. 그리고 LCD의 밝기도 사이즈 및 해상도와 더불어 점점 밝아지고 있는 추세이다. 그러나 모바일 기기는 LCD 구동 및 백라이트가 전체 시스템 파워 소모의 약 30% 정도를 차지하기 때문에 LCD의 밝기를 무작정 밝게 할 수 없다. 본 논문은 시스템 파워의 상당 부분을 차지하고 있는 LCD 백라이트를 배터리의 특성 및 사용자들의 기기 사용 패턴을 십분 고려하여 간단하고 효율적으로 LCD 백라이트 밝기를 조절하는 기법을 제안한다.

  • PDF

빛의 밝기가 일정한 교류 구동 LED 조명기술 (Alternating Current (AC) Powered LED Lighting Technology with Constant Brightness)

  • 이동원;안호명;김병철
    • 한국전기전자재료학회논문지
    • /
    • 제35권5호
    • /
    • pp.466-470
    • /
    • 2022
  • In order to widely disseminate LED lighting, LED lighting technology that directly uses AC commercial power has been recently introduced. AC powered LED lighting technology has a problem in that the light brightness of the LED changes because the voltage applied to the LED and the current flowing through the LED continuously change. In this study, when the LED current is greater than the design current, the current control signal generated by the controller is supplied to the current source to supply only the design current to the LED by increasing the voltage drop at the current source. If it is smaller than the design current, the controller is adjusted so that the current is supplied only to the LED without a voltage drop in the current source. It can be seen that the higher the maximum rectified voltage, the faster the lighting time of the LED light emitting block is, so that the power factor of the LED lighting is improved. The LED lighting technology proposed in this study enables LED lighting with constant light brightness, reduced power consumption, and long lifetime.

Polyethylene Glycol에 의한 수록한지(手漉韓紙)의 광(光) 변색(變色) 억제(抑制) (Control of the Photo-induced Discoloration of the Handmade Korean Paper with Polyethylene Glycol)

  • 전철;박수안
    • 한국산림과학회지
    • /
    • 제89권2호
    • /
    • pp.161-166
    • /
    • 2000
  • 지류문화재의 소재로 주로 사용되어온 수록한지를 네 종류로 구분하고 이를 PEG 분자량과 농도별에 따른 광 변색 억제 효과를 태양의 분광분포와 거의 흡사한 xenon arc 등(燈)을 조사(照射)해 시험한 바 다음과 같이 요약할 수 있었다. 1) Polyethylene glycol을 분산제로 사용한 미 표백 한지는 광 조사 이후 PEG 분자량과는 관계없이 10시간까지는 백색도가 급속히 떨어지는 경향을 보였으나 그 이후부터는 점진적으로 향상되는 경향을 나타내 광 변색 억제의 효과가 있음을 알 수 있었다. 2) 약품 표백을 실시한 한지는 20시간 이후부터 백색도가 증가하는 현상이 나타나 시간이 지체될 뿐 변색 억제의 효과는 있음을 알 수 있었다. 3) 황단규근(黃團葵根)을 분산제로 사용해 초지(秒紙)한 한지(韓紙)는 PEG 400-20%에 침지했을 때 백색도가 가장 낮았으나 광 조사 후는 백색도 차가 가장 적어 광 변색 억제효과가 가장 컸음을 알 수 있었다. 4) 광 열화에 의한 표면현상으로 제일 먼저 나타나는 황변(黃變) 현상을 PEG 침지로써 억제할 수 있음을 b*+값이 감소하는 것으로 알 수 있었고 명도 저하 역시 L* 값의 증가로 상당량 억제할 수 있음을 알 수 있었다.

  • PDF

LED TV 패널 밝기 균일화 보정 시스템 개발 (Development of LED TV Panel Brightness Uniformity Correction System)

  • 박제성;이원우;;주효남;김준식
    • 제어로봇시스템학회논문지
    • /
    • 제22권5호
    • /
    • pp.382-388
    • /
    • 2016
  • When Flat Panel Display (FPD) is made with backlight module, such as LED TV, it inherently suffers from the non-uniform backlight luminance problem that results in un-even brightness distribution throughout the TV screen. If the luminance of each pixel location of a TV screen as a function of the driving voltage can be measured, it can be used to compensate the non-uniformity of the backlight module. We use a carefully calibrated imaging system to take pictures of a TV screen at different levels of brightness and generate the compensation functions for the driving circuitry to correct the luminance level at each pixel location. Making use of the fact that the luminance of the screen is normally brightest at around the center of the screen and gradually decreases toward the border of the screen, the luminance of the whole TV screen is approximated by a mathematical function of the pixel locations. The parameters of the function are computed in the least square sense by the values of both the pixel luminance sent from the driving circuit and the grayscale value measured from the image taken by the imaging system. To justify the correction system, a simple second order polynomial function is used to approximate the luminance across the screen. When the driving circuit voltage is corrected according to the measured function, the variance of the screen luminance is reduced to one tenth of the one measured from the un-corrected TV screen.

동물 세포 증식을 위한 저출력 광 소스의 특성 (Characteristics of Low-level Light Source for Animal Cell Proliferation)

  • 천민우;김성환;송창훈;문성표;김태곤;박용필;김대영;김영수
    • 한국전기전자재료학회논문지
    • /
    • 제20권1호
    • /
    • pp.92-97
    • /
    • 2007
  • This paper performed the basic study for developing the Photodynamic Therapy Equipment for medical treatment. We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage. And then, each experiment was performed to irradiation group and non-irradiation group for both Rat bone marrow and Rat tissue cells. MTT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590 nm transmittance of ELISA reader. As a result, the cell increase of Rat bone marrow and tissue cells was verified in irradiation group as compared to non-irradiation group. The fact that specific wavelength irradiation has an effect on cell vitality and proliferation is known through this study.

감성 조명장치의 소모 전력 절감을 위한 거리 측정 센서 기반 자동 조광 제어 (Automated Brightness Control Using Distance Measuring Sensor for Reducing the Power Consumption of Emotional Lighting)

  • 신성훈;지상훈;정구민;이영대;배성한
    • 한국인터넷방송통신학회논문지
    • /
    • 제11권6호
    • /
    • pp.247-253
    • /
    • 2011
  • 본 논문에서는 감성조명의 소모전력 절감을 위한 거리 측정 센서 기반 자동 조광 제어 시스템을 제안하고 구현한다. 지속적인 색상변화를 표현해야 하는 감성 조명에서의 소비 전력 절감을 위하여 초음파 센서를 이용한 사용자와의 지속적인 거리 측정 및 이를 통한 PWM Dimming 제어를 수행한다. 조명장치는 마이크로 컨트롤러, LED Driver, 초음파 센서, 통신모듈 등으로 구성되며, 초음파 센서를 통해 측정된 거리 정보를 PWM 신호에 적용하여 실시간 밝기 제어를 수행한다. 기존 조명에서의 에너지 절감 기법을 감성조명에 적용하여 사용자 부재 시 불필요한 전력 소모를 최소화하는 능동형 조명 시스템을 구현한다.

세포증식을 위한 LED 조사 시스템 개발 (Development of LED Irradiation System for Cell Proliferation)

  • 천민우;박용필;이호식;김태곤;김영표
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2010년도 춘계학술대회
    • /
    • pp.581-582
    • /
    • 2010
  • 광 의료 분야 중 저출력레이저 치료에 사용되는 레이저와 같은 특정 파장을 발생하고 레이저보다 안정적으로 사용이 가능한 고휘도 LED를 조사하여 광 의료 분야에 적용할 수 있는 시스템을 개발하였다. 광조사 시스템은 마이크로 컨트롤러, FPGA, TLC5941 및 고휘도 LED를 이용하여 설계 및 제작하였으며 광조사 시간, 강도, 주기 등 세포 증식에 영향을 칠 수 있는 다양한 변수들의 제어가 가능하도록 하였다. 또한 세포 배양에 사용되는 인큐베이터 내부의 조사가 용이하도록 탈부착이 가능한 모듈화 된 LED를 설계 제작하여 세포 증식에서 발생 가능한 생물학적 변수를 최소화하였다.

  • PDF

색온도 가변형 LED 조명제어시스템 (The Color Temperature Flexibility-typed LED Lighting Control System)

  • 김혜명;양우석;조영식;박대희
    • 전기학회논문지
    • /
    • 제64권2호
    • /
    • pp.284-288
    • /
    • 2015
  • The color temperature flexibility-typed Lighting Emitting Diode(LED) lighting control system proposed in this thesis employs Pulse Width Modulation(PWM) technique to control the brightness of LED lighting. The LED lighting used as a light source has 20W downlight composed of two types of LED chips: one is Warm White and the other is Cool white. One multi-sensor module consisting an infrared sensor, an illumination sensor, and a temperature sensor was made, to which Bluetooth wireless communication technique was applied to enable a smartphone application to control lighting brightness and identify the information collected from the sensor. CS-1000, a spectroradiometer, was used to measure LED dimming control and the changing values of a color temperature in eight steps. According to a test, it was found that it was possible to change a color temperature from 3187K of Warm White LED to 5600K of Cool White LED.

근골격계 초음파의 기판 조절 입문: B Mode와 Doppler (Introduction to Knobology Focusing on B Mode and Doppler Setting in Musculoskeletal Ultrasound)

  • 민경훈
    • Clinical Pain
    • /
    • 제20권1호
    • /
    • pp.7-14
    • /
    • 2021
  • Musculoskeletal ultrasound has evolved as the essential tool to diagnose and guide intervention procedures in people with neuromusculoskeletal conditions. Image optimization and understanding device operations are core components for ultrasound guided intervention procedure training. All ultrasound machines share the common operative features and there are various buttons for the features in the device control panel. Ultrasound "knobology" refers to the thorough understanding of imaging optimization. This review addressed basic information for the transducers, depth setting, gain and focus control, different modes focusing on brightness and doppler modes.

KOMPSAT-2 영상과 IKONOS/GEOEYE-1 영상의 밝기값 상호비교 (Brightness Value Comparison Between KOMPSAT-2 Images with IKONOS/GEOEYE-1 Images)

  • 김혜연;김태정;이혁
    • 대한원격탐사학회지
    • /
    • 제28권2호
    • /
    • pp.181-189
    • /
    • 2012
  • 최근 수질추정을 위한 고해상도 위성영상의 활용 가능성에 대한 관심이 증대되고 있다. 그러나 고해상도 위성영상에서의 수면지역의 낮은 SNR(Signal to Noise Ratio)과 밝기값 비선형성과 같은 방사학적 오차는 수질추정 정확도를 감소시키는 원인이 된다. 이에 따라 위성영상을 이용한 정확한 수질추정을 위해서는 방사학적 보정이 반드시 수행되어져야 하나 KOMPSAT-2 위성영상의 경우 밝기값과 입사광량간 변환관계식이 제공되지 않기 때문에 이러한 방사학적 보정에 어려움이 존재한다. 따라서 수질모니터링에 KOMPSAT-2 영상을 활용하기 위해서는 밝기값 비선형성과 내륙 수면지역의 잡음현상을 실험적으로 파악할 필요가 있다. 본 논문에서는 충분한 검보정을 통해 선형성이 보장되고 있는 IKONOS와 GeoEye-1 영상을 기준영상으로 사용하여 동일시기에 동일지역을 촬영한 KOMPSAT-2 영상과의 밝기값 상호비교를 수행하였다. 상호비교 결과, 기준영상에 비해 KOMPSAT-2 영상의 잡음은 다소 높게 나타나나 밝기값의 경향 및 잡음의 크고 작은 패턴은 정확하게 일치하였고 KOMPSAT-2 영상 내 잡음의 영향이 최소화되는 적절한 영역의 크기는 $5{\times}5$로 나타났다. 또한 모든 실험 영상에서 밝기값의 비선형성은 존재하지 않는 것으로 확인되었다. 실험결과는 KOMPSAT-2 영상이 클로로필 농도와 같은 수질인자 추정을 위해 사용될 수 있는 가능성을 보여준다.