• 조명전기설비학회논문지
• /
• 제22권10호
• /
• pp.8-17
• /
• 2008

본 논문에서는 선박용 HID조명의 방전 개시전압을 조절함으로써 초기 방전전류를 억제하여, HID조명의 안정적인 점등이 가능한 제어방식을 제안하였다. 제안된 제어 방식은 방전 대기전압까지 출력전압을 상승시킨 후, 충전전압의 저항부하 방전을 통하여 전압을 감소시키면서, 설계된 방전개시전압시점에서 이그니터를 점화하여 방전 개시 전류를 제한한다. 방전 후 정상상태에서는 정전류 제어로 조도를 제어하게 된다. 제안된 방식은 별도의 전압제어기를 포함하지 않으면서도, 방전개시 시점을 조절할 수 있으므로, 초기 방전 전류를 크게 제한할 수 있으므로, 안정적인 점등과 조명의 수명을 확대할 수 있는 장점이 있다. 또한 조명의 이상상태를 간단한 이상검출 회로를 통하여 순시적으로 감시하여 전체 시스템의 보호 성능을 개선하였다. 제안된 제어기는 실제 선박용 2.5[kW]급의 HID 탐사조명에 대한 실험을 통하여 검증하였다.

• 한국식품영양학회지
• /
• 제23권2호
• /
• pp.147-153
• /
• 2010

Sulgidduk samples containing 1, 2, and 4% Adenophora remotiflora powder and a control were examined for moisture content, gelatinization property, color, textural characteristics, and sensory qualities to determine the optimal ratio of Adenophora remotiflora powder in the formulation. The highest viscosity, lowest viscosity, final viscosity, setback and breakdown decreased as the contents of Adenophora remotiflora powder increased in the gelatinization property of flour blends of rice cake made with Adenophora remotiflora powder. The water content of rice cake with Adenophora remotiflora powder was 40.54~41.30% and there was no significant difference between samples with Adenophora remotiflora powder. L values indicating brightness were highest in the control group and all of the a values displayed green color indicating that they were negative. The b values were lowest in the control group and the values increased as the level of Adenophora remotiflora powder increased. Evaluation of the mechanical characteristics of rice cake with Adenophora remotiflora powder, hardness, cohesion, adhesion and chewiness were all higher in the control group and as its contents were rich, such properties were reduced. In addition, there was no significant difference between adhesion and chewiness. Adhesion and elasticity were low in the control group and as its contents were rich, such properties increased. The results of the sensory test revealed that the, control group containing 1% Adenophora remotiflora powder had the highest color, flavor, taste and overall preference.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.555-566
• /
• 2015

A TRIAC dimming LED driver that can control the brightness of LED arrays for a wide range of source voltage variations is proposed in this paper. Unlike conventional PWM LED drivers, the proposed LED driver adopts a TRIAC switch, which inherently guarantees zero current switching and has been proven to be quite reliable over its long lifetime. Unlike previous TRIAC type LED drivers, the proposed LED driver is composed of an LC input filter and a variable switched capacitance, which is modulated by the TRIAC turn-on timing. Thus, the LED power regulation and dimming control, which are done by a volume resistor in the same way as the conventional TRIAC dimmers, can be simultaneously performed by the TRIAC control circuit. Because the proposed LED driver has high efficiency and a long lifetime with a high power factor (PF) and low total harmonic distortion (THD) characteristics, it is quite adequate for industrial lighting applications such as streets, factories, parking garages, and emergency stairs. A simple step-down capacitive power supply circuit composed of passive components only is also proposed, which is quite useful for providing DC power from an AC source without a bulky and heavy transformer. A prototype 60 W LED driver was implemented by the proposed design procedure and verified by simulation and experimental results, where the efficiency, PF, and THD are 92%, 0.94, and 6.3%, respectively. The LED power variation is well mitigated to below ${\pm}2%$ for 190 V < $V_s$ < 250 V by using the proposed simple control circuit.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1748-1751
• /
• 1991

Generally, we can't acquire clear boundary or area from an image having obscure boundary like allergy image by using Sobel or Lapalace operator. Also, when the image not uniform in some part of a image in brightness, there are difficulties to use the global operator such as histogram, for the contour line doesn't have the same grey level. In this paper, we will propose an algorithm to improve those difficulties. The main idea of the algorithm is that we divide the image into many rectangular parts like a chess board, calculate the average of each part, and decide the local threshold for each pixel on the calculated value. In experiment, we can get the contour and area by this algorithm which is much like to the contour and area measured by a doctor. Also, This algorithm has many advantages such as short processing time and little influences of noises and can be used in the robot vision, etc..

• 한국식품조리과학회지
• /
• 제26권5호
• /
• pp.552-558
• /
• 2010

This study was performed to provide basic data on the use of green laver for jook. To accomplish this, we tested water content, color, brightness, mechanical qualities and sensory qualities in comparison to a control group. Higher concentration of green laver powder decreased water content, lightness, redness, viscosity and pH. Further, higher concentration of green laver resulted in lowered preference regarding appearance. However, better flavor was with the result of a higher amount of green laver. Therefore, green laver seems to have benefits for use in oriental soup. Accordingly, we expect there is potential for use of green laver for jook.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2004년도 춘계학술발표논문집
• /
• pp.56-65
• /
• 2004

The Asia Pacific papermaking giants are China, Japan and Korea followed by Indonesia. The strong trends in recent years have been the move to alkaline/neutral sizing which has assisted the move from kaolin and talc as the major filler minerals to ground calcium carbonate and precipitated calcium carbonate. Kaolin remains important as a constituent in many coating formulations and Chinese-sourced talc, due to its brightness and price will remain important especially in paper filler minerals. The need for ever increasing printing surface quality and continuing efforts by the paper manufacturers to keep costs under control will ensure minerals in papermaking will continue to be a dynamic subject in the years ahead.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.68-73
• /
• 2001

This experiment was executed to clarify the optimum condition of reductive bleaching for 100% color papers. The reductive bleaching of the color paper was desirable to be done under such conditions as high temperature over $60^{\circ}C$ and high consistency within possibly short time. The FAS bleaching like the sodium hydrosulfite required oxygen-free condition. Especially, as the mixture between pulps and chemicals was favored in case of the high consistency, it was actively recommended. Therefore, it is desirable to control the dosage with the type of the dyes, the nature, the dye content, the paper compositions, and the targeting initial and final brightness.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.55-59
• /
• 2011

Atmospheric plasma technology was utilized in order to modify surface characteristics of base paper for coating. Argon(Ar) and oxygen(O2) gases were used. It was found that contact angle of a water droplet was decreased with increasing voltage during plasma treatment, meaning that the hydrophilicity of paper surface was increased. On the other hand, the physical properties like roughness and optical properties such as gloss, brightness and opacity were not influenced by the plasma treatment. In conclusion, atmospheric plasma technology can be utilized to control hydrophilicity of paper surface without affecting physical properties of the paper.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 추계학술발표대회
• /
• pp.418-420
• /
• 2017

전광판을 통해 이미지를 표시할 때 이미지를 구성하는 각 화소에 대응하는 도트들 별로, 모두 일정한 밝기로 색상을 출력하기 때문에 이미지 내에 다양한 색상이 포함되어 있는 경우, 상대적으로 밝은 색상이 어두운 색상보다 더 밝게 보이는 문제를 가지고 있다. 또한 기존의 전광판들은 전광판을 통해 글자를 표시할 때 글자의 크기에 관계없이 모두 일정한 밝기로 글자를 표시하기 때문에 상대적으로 작은 글자가 큰 글자에 비해 잘 보이지 않는 문제가 있다. 우리는 전광판을 통해 이미지를 표시할 때, 해당 이미지 내의 다양한 색상들에 따라 부분적으로 전광판의 각 도트들의 휘도를 서로 다르게 출력하고, 전광판을 통해 글자를 표시할 때, 글자의 크기 별로 휘도를 서로 다르게 출력함으로써, 전광판을 통해 표시되는 정보에 대한 가독성을 향상시킬 수 있는 RICS 시스템을 설계한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.31-34
• /
• 2001

Changing to a 24-hour urbanistic life style, a night time activities constituted for a major portion. Important of a beautiful exterior lighting as well as safety, and security concerns become increasingly. However, the removal or control of the excessive lighting is considered more important then increasing the brightness of the lamps to achieve bother safety and security. Representing a cheerful and leisure environment from the exterior lighting can also harmonize two aspects of energy saving and sustaining green environment. Designing of exterior lighting at the ＯＯ Agricultural & Fishery Circulation center symbolizes the suitability, convenience and production. It's design and analysis represent the optimum urban night time environment.