• Wind and Structures
• /
• 제27권5호
• /
• pp.293-309
• /
• 2018

The prediction of multimode flutter relies, to a larger extent than bimodal flutter, on accurate modeling of the self-excited forces since it is challenging to perform experimental validation by using aeroelastic tests for a multimode case. This paper sheds some light on the accuracy of predicted self-excited forces by comparing numerical predictions of self-excited forces with measured forces from wind tunnel tests considering the flutter vibration mode. The critical velocity and the corresponding flutter vibration mode of the Hardanger Bridge are first determined using the classical multimode approach. Then, a section model of the bridge is forced to undergo a motion corresponding to the flutter vibration mode at selected points along the bridge, during which the forces that act upon it are measured. The measured self-excited forces are compared with numerical predictions to assess the uncertainty involved in the modeling. The self-excited lift and pitching moment are captured in an excellent manner by the aerodynamic derivatives. The self-excited drag force is, on the other hand, not well represented since second-order effects dominate. However, the self-excited drag force is very small for the cross-section considered, making its influence on the critical velocity marginal. The self-excited drag force can, however, be of higher importance for other cross-sections.

• 대한토목학회논문집
• /
• 제28권5A호
• /
• pp.641-647
• /
• 2008

본 논문은 상시진동데이터로부터 구조물의 고유진동수 및 감쇠비를 추정하는 기법을 소개한다. 제안된 기법은 TDD기법에서 추출된 모드형상과 상호상관신호로부터 직교 잡음이 제거된 자유진동함수를 추출하고 시스템 인식기술을 적용하여서 각 모드별 고유진동수와 감쇠비를 추정한다. 제안 알고리즘의 정확도는 수치적으로 기존의 기법과 비교분석 되었다. 제안 알고리즘의 현장 적용성 검토는 서해대교 보강형의 수직방향 가속도에 대한 상시진동데이터를 통하여 검증되었으며, 총 24개의 저차모드가 추출되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.894-901
• /
• 2006

In general, the tension fores of hanger cable in suspension bridges play an important role in evaluating the bridge state. The vibration method, as a conventional one, has been widely applied to estimate the tension fores by using the measured frequencies on hanger cables. However, the vibration method is not applicable to short hanger cables because the frequency of short cables is severely sensitive to the flexural rigidity. Thus, in this study, the tension forces of short hanger cables, of which the length is shorter than 10meters, were estimated through back analysis of the cable frequencies measured from Gwang-An suspension bridge in Korea. Direct approach to rock analysis is adopted using the univariate method among the direct search methods as an optimization technique. The univariate method is able to search the optimal tension forces without regard to the initial ones and has a rapid convergence rate. To verify the feasibility of back analysis, the results from back analysis and vibration method are compared with the design tension forces. From the comparison, it can be inferred that back analysis results are more reasonable agreement with the design tension forces of short hanger cable. Therefore, it is concluded that back analysis applied in this study is an appropriate tool for estimating tension forces of short hanger cables.

• 한국방재학회 논문집
• /
• 제6권2호
• /
• pp.9-15
• /
• 2006

토목구조물은 주로 안전성을 위주로 설계되어 왔으나 최근 들어 토목기술에 대한 환경친화적 측면이 중시되어지는 가운데 구조물의 사용성과 안정성의 비중이 커져가고 있다. 또한 기술의 발달로 재료의 고강도화가 이루어져 구조부재 자체의 크기나 단면적이 줄어들었는데 이는 교량구조물의 과도한 처짐과 진동을 동시에 야기했다. 따라서 본 연구에서는 교량 구조물의 통과주체가 되는 차량동하중과 인체보행하중이 교량에 미치는 처짐과 진동에 대한 영향을 적용 가능한 가장 이상화 된 모델링을 찾아내어 진동영향평가 할 수 있도록 하기 위한 연구를 수행하였다.

• Smart Structures and Systems
• /
• 제1권1호
• /
• pp.83-101
• /
• 2005

This paper summarizes the application of a rational methodology for the structural assessment of older reinforced concrete Tunisian bridges. This methodology is based on ambient vibration measurement of the bridge, identification of the structure's modal signature and finite element model updating. The selected case study is the Boujnah bridge of the Tunis-Msaken Highway. This bridge is made of a continuous four-span simply supported reinforced concrete slab without girders resting on elastomeric bearings at each support. Ambient vibration tests were conducted on the bridge using a data acquisition system with nine force-balance accelerometers placed at selected locations of the bridge. The Enhanced Frequency Domain Decomposition technique was applied to extract the dynamic characteristics of the bridge. The finite element model was updated in order to obtain a reasonable correlation between experimental and numerical modal properties. For the model updating part of the study, the parameters selected for the updating process include the concrete modulus of elasticity, the elastic bearing stiffness and the foundation spring stiffnesses. The primary objective of the paper is to demonstrate the use of the Enhanced Frequency Domain Decomposition technique combined with model updating to provide data that could be used to assess the structural condition of the selected bridge. The application of the proposed methodology led to a relatively faithful linear elastic model of the bridge in its present condition.

• 한국재난정보학회 논문집
• /
• 제13권2호
• /
• pp.249-257
• /
• 2017

최근 당진-평택시에 위치한 서해대교에서 낙뢰로 인한 케이블 단선사고가 발생하였다. 이것은 자연발생 사고로 결론이 났지만 케이블교량의 단선으로 인하여 안전문제를 재검토하는 과정이 매우 중요한 일임을 상기하게 된 사건이다. 즉, 케이블 교량에서 케이블의 역할은 구조물의 안전에 지대한 영향을 미치며 이로 인해 전체구조체계에 대한 영향을 파악할 필요가 대두 되었다. 케이블 교량은 주 탑을 세우고 바닥판을 케이블로 지지하는 경제적 교량으로 케이블의 영향은 주 부재로써 전 교량시스템의 안전에 영향이 큰 부재이다. 사장교에서 케이블은 케이블의 장력이 변할 때 발생하는 사하중으로 인한 처짐의 변화 때문에 비선형 성을 가진다. 동적해석은 변형 된 사하중 접선강도행렬을 사용하여 되며 새로운 개념은 전체 교량에 대한 케이블 진동 (면내 및 스윙 모두)의 효과를 연구하기 위해 케이블을 여러 요소로 분할하였다. 이 연구의 결과는 전반적인 교량 역학에 케이블 진동의 중요성을 보여준다.

• Wind and Structures
• /
• 제20권2호
• /
• pp.275-292
• /
• 2015

The presence of traffic on a slender long-span bridge deck will modify the cross-section profile of the bridge, which may influence the flutter derivatives and in turn, the critical flutter wind velocity of the bridge. Studies on the influence of vehicles on the flutter derivatives and the critical flutter wind velocity of bridges are rather rare as compared to the investigations on the coupled buffeting vibration of the wind-vehicle-bridge system. A typical streamlined cross-section for long-span bridges is adopted for both experimental and analytical studies. The scaled bridge section model with vehicle models distributed on the bridge deck considering different traffic flow scenarios has been tested in the wind tunnel. The flutter derivatives of the modified bridge cross section have been identified using forced vibration method and the results suggest that the influence of vehicles on the flutter derivatives of the typical streamlined cross-section cannot be ignored. Based on the identified flutter derivatives, the influence of vehicles on the flutter stability of the bridge is investigated. The results show that the effect of vehicles on the flutter wind velocity is obvious.

• Smart Structures and Systems
• /
• 제6권8호
• /
• pp.905-920
• /
• 2010

Changes in temperature, loads and boundary conditions may have effects on the dynamic properties of large civil structures. Taking the Run Yang Suspension Bridge as an example, modal properties obtained from ambient vibration tests and from the structural health monitoring system of the bridge are used to identify and evaluate the modal parameter variability. Comparisons of these modal parameters reveal that several low-order modes experience a significant change in frequency from the completion of the bridge to its operation. However, the correlation analysis between measured modal parameters and the temperature shows that temperature has a slight influence on the low-order modal frequencies. Therefore, this paper focuses on the effects of the boundary conditions on the dynamic behaviors of the suspension bridge. An analytical model is proposed to perform a sensitivity analysis on modal parameters of the bridge concerning the stiffness of expansion joints located at two ends of bridge girders. It is concluded that the boundary conditions have a significant influence on the low-order modal parameters of the suspension bridge. In addition, the influence of vehicle load on modal parameters is also investigated based on the proposed model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.854-863
• /
• 2008

A high attention has been paid on the running safety of Korean high-speed train, KTX. In running of KTX on bridge, the running unsafety problem issued from a resonance phenomenon of bridge, which was usually caused by the periodic wheel-loads of train. Therefore, many researches on this running safety of train on bridge have been conducted by domestic or foreign researchers. In this paper, for PSC box-girder bridge which is the representative high-speed railway bridge type, some numerical analyses on the dynamic characteristics of bridge with the non-periodic wheel-loads through vehicle size adjustment were performed. These numerical analyses shows the fact that the resonance phenomenon on bridge was mitigated through vehicle size adjustment. Additional numerical analyses on the vibration reduction of bridge in accordance with the location of size-adjusted vehicle were performed. From these results, it was represented that the adjustment of vehicle size has an effect on the running safety of train as well as the ride comfort.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.251-255
• /
• 2012

Structural intensity has been mainly utilized to identify vibration energy flow in a vessel. In this paper, the structural intensity of a shuttle tanker subjected to H-moment of the main engine was calculated using a finite element model. From the analysis, it was found that the top-bracing elements, which support the main engine onto the hull structure to prevent the excessive transverse vibration of the main engine, play the role of the dominant path and sink for vibration energy flow from the main engine. Therefore, the structural intensity was controlled by the modification of stiffness and damping characteristics of the top-bracing elements. As a result, it is observed that the transverse vibration level at the center of navigation bridge deck decreased after the control of structural intensity.