• 한국산학기술학회논문지
• /
• 제20권8호
• /
• pp.649-656
• /
• 2019

조선소, 교량 구조물, 건설기계, 플랜트 산업 등 다양한 분야에서 폭 넓게 활용되고 있는 이산화탄소 아크용접(FCAW: Flux Cored Arc Welding)은 피복 아크 용접(SMAW: Shielded Metal Arc Welding)의 단점을 보완하기 위한 대안으로 1950년대 초 개발되었다. FCAW는 모든 자세에서 용접이 가능하고 작업여건 변수가 많은 현장에서 우수한 품질을 얻을 수 있는 장점이 있어 탄소강과 합금강의 중판, 후판 용접에 많이 사용되고 있다. 본 연구에서는 FCAW를 이용하여 SS400(일반구조용 압연강재)와 SM490A(용접구조용 압연강재)를 이종용접한 후 용접부의 기계적 특성(인장시험, 굽힘시험, 경도시험, 충격시험, 매크로시험)을 분석하고 다음과 같은 결론을 도출하였다. 인장시험 결과, 모든 용접자세에서 KS 규격 인장강도 범위($400{\sim}510N/mm^2$)를 만족하였다. 굽힘시험 결과, 대부분의 시편에서 굽힘시 표면의 터짐 현상이나 기타 결점이 나타나지 않았고, 소성변형 후에도 충분한 인성을 발휘하는 것을 확인할 수 있었다. 경도시험 결과, 모든 결과 값이 KS B 0893의 규격치 350Hv보다 낮게 나타나 양호한 것으로 판단된다. 충격시험 결과, 모든 결과가 KS 기준 수치인 27J 보다 큰 것으로 나타났다. 매크로시험 결과 용접부의 형상별로 균일한 조직 상태를 나타냈으며, 용접부 전단면에 걸쳐 내부 결함, 기포 또는 불순물 등이 발견되지 않아 라미네이션의 우려가 없는 것으로 나타났다.

• 한국수자원학회논문집
• /
• 제55권1호
• /
• pp.33-42
• /
• 2022

본 연구에서는 3차원 상용 수치모형 Flow-3D를 활용하여 상류 수위(유입유량) 변동, 격벽의 간격(pool의 길이) 변화, 잠공 유무 등에 따른 아이스 하버 어도 내 흐름 양상을 분석하였다. 수치모의 결과의 적합성을 입증하기 위해 경안천 대곡교 하류에 설치된 실제 어도에서 3차원 초음파 유속계를 사용하여 어도 출구부 단면 유속과 유량을 관측하였다. Flow-3D 모형에는 난류 모듈로 4가지를 선택할 수 있는데, 관측 자료로 검증 결과 RNG 모형이 아이스하버 어도 내 흐름 특성을 가장 잘 재현하였다. 하천의 유량 전량이 어도로만 유입되어 흐른다는 조건에서 수위 변화에 따른 어도 내 유속구조를 모의해 보았다. 그 결과 최저수위에서는 잠입류와 표면류가 혼재하여 발생하였는데, 최저수위에서 약 10 cm 이상만 수위가 상승하여도 모든 pool에서 잠입류가 사라지고 오직 표면류만 발생하였다. 예상과 달리 수위가 조금 상승해도 흐름이 꽤 단순하게 표면류 위주로 발생하였다. 격벽간 간격을 늘려주면 수위가 상승하더라도 잠입류와 표면류가 혼재되어 나타나는 현상이 지속되었다. 그리고 격벽 하단에 잠공이 있는 경우가 없는 경우에 비해 잠입류가 여러 pool에서 생성되는 경향을 보였다. 보다 적극적인 어도 사후 관리로 잠공 폐색을 막아 어도 내 다양한 흐름이 생성될 수 있도록 유도하는 것이 필요해 보인다.

• Tuberculosis and Respiratory Diseases
• /
• 제85권3호
• /
• pp.249-255
• /
• 2022

Background: The main cause of death in pulmonary embolism (PE) is right-heart failure due to acute pressure overload. In this sense, extracorporeal membrane oxygenation (ECMO) might be useful in maintaining hemodynamic stability and improving organ perfusion. Some previous studies have reported ECMO as a bridge to reperfusion therapy of PE. However, little is known about the patients that benefit from ECMO. Methods: Patients who underwent ECMO due to pulmonary thromboembolism at a single university-affiliated hospital between January 2010 and December 2018 were retrospectively reviewed. Results: During the study period, nine patients received ECMO in high-risk PE. The median age of the patients was 60 years (range, 22-76 years), and six (66.7%) were male. All nine patients had cardiac arrests, of which three occurred outside the hospital. All the patients received mechanical support with veno-arterial ECMO, and the median ECMO duration was 1.1 days (range, 0.2-14.0 days). ECMO with anticoagulation alone was performed in six (66.7%), and ECMO with reperfusion therapy was done in three (33.3%). The 30-day mortality rate was 77.8%. The median time taken from the first cardiac arrest to initiation of ECMO was 31 minutes (range, 30-32 minutes) in survivors (n=2) and 65 minutes (range, 33-482 minutes) in non-survivors (n=7). Conclusion: High-risk PE with cardiac arrest has a high mortality rate despite aggressive management with ECMO and reperfusion therapy. Early decision to start ECMO and its rapid initiation might help save those with cardiac arrest in high-risk PE.

• 대한토목학회논문집
• /
• 제42권6호
• /
• pp.751-762
• /
• 2022

강합성 교량에서 강 거더와 콘크리트 바닥판의 합성을 위한 전단연결재로는 용접접합 머리붙이 스터드가 주로 사용된다. 용접접합 전단연결재의 경우, 손상 또는 노후화된 바닥판 철거 시에 파쇄에 따른 소음, 비산먼지 등이 발생하여 환경적 문제가 지적되고 있다. 따라서 환경적 문제 및 생애주기비용 관점의 효율적인 유지관리를 위해서는 노후화된 콘크리트 바닥판의 교체가 용이한 분리식 전단연결재 개발이 필요하다. 기존의 볼트접합 전단연결재로는 매립너트 방식이 주로 연구되었으나 낮은 강성과 전단저항강도, 초기슬립 증가 등으로 교량과 같은 토목구조물에는 활용되지 못하고 있는 실정이다. 본 논문에서는 이러한 문제점들을 개선하기 위해 매립너트 부분이 스터드 기둥에 일체화되고 확대 기둥 하단에 테이퍼진 형상을 갖는 분리식 볼트접합 전단연결재를 제안하였다. 제안된 분리식 스터드볼트의 정적 전단강도와 슬립 변위에 대한 성능 검증을 위해 수평전단실험을 수행하였고, 기존 용접접합 스터드와 성능을 비교하였다. 제안된 분리식 볼트접합 전단연결재가 전단성능이 매우 우수하고, 슬립변위 또한 연성설계기준을 만족함으로써 기존 용접 스터드를 충분히 대체하여 적용 가능함을 확인하였다.

• 경영정보학연구
• /
• 제25권4호
• /
• pp.233-248
• /
• 2023

최근 지능정보기술의 활용이 확산되면서 개인정보 침해에 대한 위험이 더욱 증가하고 있다. 특히, 기업이 디지털 환경에서 개인정보의 수집과 활용에 중점을 두면서, 기업의 고객정보 보호에 대한 사회적 관심이 증가하고 있다. 비록 인터넷 사용자들의 개인정보 보호에 대한 인식은 광범위하게 연구되어 왔으나, 특정 업종의 문맥, 더 나아가 업종별 개인정보 보호에 대한 비교 연구는 아직 부족한 실정이다. 본 연구는 기업의 개인정보 보안 특성에 대한 사용자 인식을 바탕으로, 업종별 개인정보 보호 수준을 비교 분석하고자 한다. 이를 위해 인터넷 사용자 498명을 대상으로 국내 포털사이트, 해외 포털사이트, 소셜미디어, 온라인 쇼핑몰, 은행, 정부기관, 온라인 사행성 게임 등 다양한 업종에 대한 개인정보 보안 특성에 대한 분석을 실시하였다. 설문을 통해 수집된 데이터를 분석적 계층과정(Analytic Hierarch Process, AHP)을 이용하여 각 보안 특성의 상대적 중요도를 도출하였다. 연구결과, 사용자들은 기업의 개인정보 보호를 평가할 때 기술적 보안과 투명성을 가장 중요한 요소로 간주하였다. 기술적 보안면에서는 은행과 국내 포털사이트가, 투명성 면에서는 은행과 정부기관이 우수한 성과를 보였다. 반면, 소셜미디어는 기술적 보안과 투명성 모두에서 가장 부진한 성과를 보였다. 본 연구는 개인정보 보안에 대한 다차원적 접근법을 제시하고, 사용자 관점에서 각 보안 특성에 대한 업종별 차이를 조명함으로써 연구적 의의를 가진다.

• Asia pacific journal of information systems
• /
• 제22권4호
• /
• pp.101-123
• /
• 2012

Currently, Social Media, it has widely a renown keyword and its related social trends and businesses have been fastly applied into various contexts. Social media has become an important research area for scholars interested in online technologies and cyber space and their social impacts. Social media is not only including web-based services but also mobile-based application services that allow people to share various style information and knowledge through online connection. Social media users have tendency to common identity- and bond-attachment through interactions such as 'thumbs up', 'reply note', 'forwarding', which may have driven from various factors and may result in delivering information, sharing knowledge, and specific experiences et al. Even further, almost of all social media sites provide and connect unknown strangers depending on shared interests, political views, or enjoyable activities, and other stuffs incorporating the creation of contents, which provides benefits to users. As fast developing digital devices including smartphone, tablet PC, internet based blogging, and photo and video clips, scholars desperately have began to study regarding diverse issues connecting human beings' motivations and the behavioral results which may be articulated by the format of antecedents as well as consequences related to contents that people create via social media. Social media such as Facebook, Twitter, or Cyworld users are more and more getting close each other and build up their relationships by a different style. In this sense, people use social media as tools for maintain pre-existing network, creating new people socially, and at the same time, explicitly find some business opportunities using personal and unlimited public networks. In terms of theory in explaining this phenomenon, social capital is a concept that describes the benefits one receives from one's relationship with others. Thereby, social media use is closely related to the form and connected of people, which is a bridge that can be able to achieve informational benefits of a heterogeneous network of people and common identity- and bonding-attachment which emphasizes emotional benefits from community members or friend group. Social capital would be resources accumulated through the relationships among people, which can be considered as an investment in social relations with expected returns and may achieve benefits from the greater access to and use of resources embedded in social networks. Social media using for their social capital has vastly been adopted in a cyber world, however, there has been little explaining the phenomenon theoretically how people may take advantages or opportunities through interaction among people, why people may interactively give willingness to help or their answers. The individual consciously express themselves in an online space, so called, common identity- or bonding-attachments. Common-identity attachment is the focus of the weak ties, which are loose connections between individuals who may provide useful information or new perspectives for one another but typically not emotional support, whereas common-bonding attachment is explained that between individuals in tightly-knit, emotionally close relationship such as family and close friends. The common identify- and bonding-attachment are mainly studying on-offline setting, which individual convey an impression to others that are expressed to own interest to others. Thus, individuals expect to meet other people and are trying to behave self-presentation engaging in opposite partners accordingly. As developing social media, individuals are motivated to disclose self-disclosures of open and honest using diverse cues such as verbal and nonverbal and pictorial and video files to their friends as well as passing strangers. Social media context, common identity- and bond-attachment for self-presentation seems different compared with face-to-face context. In the realm of social media, social users look for self-impression by posting text messages, pictures, video files. Under the digital environments, people interact to work, shop, learn, entertain, and be played. Social media provides increasingly the kinds of intention and behavior in online. Typically, identity and bond social capital through self-presentation is the intentional and tangible component of identity. At social media, people try to engage in others via a desired impression, which can maintain through performing coherent and complementary communications including displaying signs, symbols, brands made of digital stuffs(information, interest, pictures, etc,). In marketing area, consumers traditionally show common-identity as they select clothes, hairstyles, automobiles, logos, and so on, to impress others in any given context in a shopping mall or opera. To examine these social capital and attachment, we combined a social capital theory with an attachment theory into our research model. Our research model focuses on the common identity- and bond-attachment how they are formulated through social capitals: cognitive capital, structural capital, relational capital, and individual characteristics. Thus, we examined that individual online kindness, self-rated expertise, and social relation influence to build common identity- and bond-attachment, and the attachment effects make an impact on both the willingness to help, however, common bond seems not to show directly impact on information sharing. As a result, we discover that the social capital and attachment theories are mainly applicable to the context of social media and usage in the individual networks. We collected sample data of 256 who are using social media such as Facebook, Twitter, and Cyworld and analyzed the suggested hypotheses through the Structural Equation Model by AMOS. This study analyzes the direct and indirect relationship between the social network service usage and outcomes. Antecedents of kindness, confidence of knowledge, social relations are significantly affected to the mediators common identity-and bond attachments, however, interestingly, network externality does not impact, which we assumed that a size of network was a negative because group members would not significantly contribute if the members do not intend to actively interact with each other. The mediating variables had a positive effect on toward willingness to help. Further, common identity attachment has stronger significant on shared information.

• 대한치과기공학회지
• /
• 제10권1호
• /
• pp.11-24
• /
• 1988

The purpose of this study was to determine the concentration of cadmium, nickel and chromium in the air of the work-place, blood of and urine of workers and compare the level of those heavy metals by the duration of work, work-place, process of work, smoking and other factors. In this study, 48 male dental laboratory technicans and 72 office workers as the control group were subjected. The concentration of cadmium, nickel and chromium in their blood sand urine, and that of heavy metals in the air of their work-rooms were examined and analyzed from June I 1987 to September 30, 1987. The results were as follows : 1. The concentration of cadmium in the air was the highest in the porcelain part, $0.0087{\pm}0.0016mg/m^3$, that of nickel was the highest in the crown bridge part, $0.4253{\pm}0.0052mg/m^3$, and that of chrnmium was highest in the partial denture part, $0.1063{\pm}0.0024mg/m^3$. 2. cadmium, nickel and chromium concentrations in the blood and urine of dental laboratory techincians were higher that in the office workers'. Especially the concentration of cadmium in the blood($1.92{\pm}1.23{\mu}g$/100ml) of th dental laboratory techician was about two times as high as that in the office workers'($0.90{\pm}0.73{\mu}g$/100ml), and the concentration of nickel in the urine($48.53{\pm}38.83{\mu}g$/e) of the dental laboratory thchnician was about two times as high as that in the office worker's($20.24{\pm}15.35{\mu}g$/e). 3. there was no difference in the concentration of cadmium, nickel and chromium in the blood and urine with a longer duration of work. 4. The concentration of cadmium and chromium in the blood and urine differed significantly depending upon the place of work. The concentration of cadmium was the highest in the blood of dental laboratory technicians working kin the poreclain part marking at $2.53{\pm}1.08{\mu}g$/100ml. The chromium level was the heighest in the blood of partial denture park workers with a concentration of $3.60{\pm}1.02{\mu}g$/100ml. Concerning the level of cadmium in urine, it was the highest in the porcelain part workers with a concentration of $3.41{\pm}3.15{\mu}g$/e. 5. The concentration of cadmium in the urine of metal trimming and polishing group($2.64{\pm}2.41{\mu}g$/e) was higher than that of non-metal trimming and polishing group($1.39{\pm}1.18{\mu}g$/e). 6. The concentration of chromium in the blood of smoking group($2.46{\pm}1.54{\mu}g$/100ml)was higher than that lf non-smoking group($1.54{\pm}1.25{\mu}g$/100ml). 7. The height positive correlation coefficient was shown between the concentration of nickel and chromium in the blood among the all correlations between 3metals(Cd, Ni, Cr) in the blood and those in urine. The correlation coefficient was relatively high(r=0.605,,p<0.01). In general, the higher the concentration of heavy metals in the air of work places the higher the concention lf them in the blood and urine of workers, mere attention should be paid to the working environment of dental laboratory workers, Furthermore, continuous biological monitoring and further research are required for an efficient health management for dental laboratory workers.

• Asia pacific journal of information systems
• /
• 제23권3호
• /
• pp.1-23
• /
• 2013

Open Source Software Development (OSSD) differentiates itself from traditional closed software development in that it reveals its source codes online and allows anyone to participate in projects. Even though its success was in doubt, many of the open collaborative working models produced successful results. Academia started to get interested in how developers are willing to participate even when there are no extrinsic rewards for their efforts. Many studies tried to explain developers' motivations, and the pursuit of ideology, reputation, and altruism are found to be the answers. Those studies, however, focused mostly on how the first contribution is made out of a certain motivation. Nowadays, OSSD reaches at its maturity and 70% of professional developers have used or utilized open source software or code in their works. As the proportion of people experiencing OSS, the accounts from previous studies are expected to be weakened. Also, extant literature fails to explain how the motivation of participating in OSS evolves over time and experiences. Given that changing over time or over experiences is the natural in the perception of motivation, studies in an attempt to understand how the motivation changes or evolves are in need. In this study, we aimed to explain how the perception about OSS from past usage or related experiences leads to the intention to sustain OSS participations. By doing so, we try to bridge the gap between previous studies and the actual phenomenon. We argued that perceived instrumentality about OSS learned from past experiences will first affect the formation of organizational identity towards general OSS community. And once the organizational identity is formed, it will affect the one's following behaviors related to OSS development, most likely to sustain the favoring stance toward OSS community. Our research distinguishes itself from previous one in that it divides the paths from organizational identity formed to the intention to sustain the voluntary helping behaviors, by altruistic and conforming intentions. Drawing on this structural model, we could explain how organizational identity engages in forming the sustaining intention from past experiences, and that the intention to help at individual level and organizational level works at different level in OSS community. We grounded our arguments on Social identity theory and Organizational Citizenship theory. We examined our assumption by constructing a structural equation model (SEM) and had 88 developers to answer our online surveys. The result is analyzed by PLS (partial least square) method. Consequently, all paths but one in our model are supported, the one which assumed the association between perceived instrumentality and altruistic intention. Our results provide directions in designing online collaborative platforms where open access collaboration is meant to occur. Theoretically, our study suggests that organizational citizenship behavior can occur from organizational identity, even in bottom-up organizational settings. More specifically, we also argue to consider both organizational level and individual level of motivation in inducing sustained participations within the platforms. Our result can be interpreted to indicate the importance of forming organizational identity in sustaining the participatory behaviors. It is because there was no direct association between perceived instrumentality from past experiences and altruistic behavior, but the perception of organizational identity bridges the two constructs. This means that people with no organizational identity can sustain their participations through conforming intention from only the perception of instrumentality, but it needs little more than that for the people to feel the intention to directly help someone in the community-first to form the self-identity as a member of the given community.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.215-225
• /
• 2016

본 연구는 우리나라 공연예술의 해외진출현황을 분석하여 시장진입의 지체요인을 도출해냄으로써 시장경쟁력을 갖추기 위한 요건을 찾고 대안을 모색하기 위한 것이다. 2007년부터 2014년까지 8년간 공연예술분야의 해외지원액 대비 수입액은 16.4%에 그쳤고, 같은 시기에 해외 무료공연 건수와 1회 평균 공연료는 제자리걸음을 면치 못했다. 또한 관객수가 2007년에서 2014년까지 3.3배 증가하였는데 이는 공연건수 증가율인 3.8배에 미치지 못하는 수치이며, 단위 공연 당 관객 수 역시 장기간 정체되어 있다. 그 원인으로는 단순 국제교류와 해외시장진출, 비영리와 영리 개념의 혼재, 현지 소비자 보다는 프리젠터나 프로듀서와 같은 공급자 관점의 프로그래밍 관행으로 인한 진출전략 수립의 미진함, 그리고 전략수립의 기초자료인 소비자조사가 거의 전무한 점을 들 수 있다. 본 논문에서는 공연예술 해외시장 진출의 지체현상 타개를 위한 시사점을 찾기 위해 타 분야인 한류산업을 하나의 사례로 살펴보았다. 그 결과 한류의 경제적 분석에서 제시된 한류지수나 한류심리지수와 같이 공연예술의 해외시장진출을 위한 공연소비자지수와 공연심리지수의 개발을 통해 권역별, 국가별 맞춤형 시장전략의 수립이 요구되었다. 또한 공연예술에 적합한 해외 현지 소비자 조사가 시급히 이루어져야 할 것으로 판단되었다. 아울러 본고는 공연예술의 해외 진출 현황에 따른 실증적 연구로써 현장과 학문 간의 가교 역할을 함과 동시에 공연예술 해외진출의 전략 구축 방안을 모색하는 데 다양하게 활용될 수 있기를 기대한다.

• Asia pacific journal of information systems
• /
• 제24권4호
• /
• pp.577-610
• /
• 2014

Although service innovation is not a new concept, innovation research in general tends to focus on technological innovation by manufacturing firms. With this view, innovation studies focus on product(e.g., goods) and process(e.g., product systems) innovation, ignoring service innovation and its inherent opportunities. Since major economy has been transformed to service economy, service innovation is considered a new effective way to sustain and gain a competitive advantage. Service innovation is no longer regarded merely as a side activity to product innovation; it has become a main research topic in its own right, accompanied by an increasing focus on services. While the number of service innovation studies has increased dramatically in the past 30 years in international research, few studies have been performed in domestic studies because domestic service innovation research began from the middle of 2000. In addition, there are no comprehensive literature reviews describing the evolution of service innovation research in both international and domestic studies because of the heterogeneities of service industry and multidiscipline characteristics of service innovation studies. To bridge this research gap, the purpose of this paper is to perform an extensive literature review and synthesis to enable a critical review of extant research on service innovation and trace its evolution, which will establish a foundation for further studies. By reviewing 169 articles (136 international papers; 33 domestic papers) published between 2000 and 2014 (in past 15 years), primarily in leading service, innovation and management information systems journals, this study analyzes the progression of service innovation research according to the four aspects such as number of studies, topics, methodologies and target industries. Overall, the view of service innovation has evolved, from a complement of traditional product innovation to a multidimensional, all-encompassing concept that entails several functions, both within and outside the firms. The results showed that domestic research still stays at the formation phase of service innovation studies although international research is in the maturity or multidimensional phase. We found increasing recent activities pertaining to service innovation, resulting from the increasing interest in services innovation across various industries and the links of new topics to the service innovation concept in both international and domestic studies. However, the main focus of service innovation research showed a different propensity between international and domestic studies: the former mainly focuses on a much more diversified pattern, emphasizing the linkages between service innovation and business strategy while the latter mainly focuses on the service innovation process(system) and service design. In addition, there are many case studies in domestic studies while many empirical studies in international studies. Domestic studies should increases the understanding of the interplay between service innovation and product innovation within manufacturing firms. Furthermore, rather than focusing on intrinsic distinctions between service innovation and product innovation, researchers should strive to develop and conceptualize service innovation in domestics studies. The present research also provides useful implications for practitioners. First, this study contributes to expand the current understanding of service innovation research by performing an extensive literature review. Second, tracing and comparing the progression and trends of service innovation research between international and domestic studies, this study showed the similarities and differences between them, which provide practical guidance on future research directions and research agenda. Third, this study performed literature review establishing the analysis system in the initial stage and using them to analyze articles, which is leading to explain the research review of service innovation more systematically and objectively. Finally, this study suggests the domestic researchers their future interests and topics of service innovation research.