• Journal of Power Electronics
• /
• 제7권1호
• /
• pp.13-20
• /
• 2007

LLC resonant converters display many advantages over the conventional LC series resonant converter such as narrow frequency variation over wide range of load and input variation and zero voltage switching even under no load conditions. This paper presents analysis and design consideration for the half bridge LLC resonant converter. Using the fundamental approximation, the gain equation is obtained, where the leakage inductance in the transformer secondary side is also considered. Based on the gain equation, the practical design procedure is investigated to optimize the resonant network for a given input/output specifications. The design procedure is verified through an experimental prototype of the 115W half-bridge LLC resonant converter.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.95-100
• /
• 1990

The behavior of short span filled spandrel arch bridge of 10 and 21 m span with various axis line, rise and backill height were investigated under the design loads(self weight, earth pressure, temperature load, live load, etc). Even though the behaviors of arch were known as relatively complicated, the followings can be concluded within the limits of this study. The design value of arch bridge increase as the rise decreases, the effects of temperature load become dominant for the design of arch bridge, and governing design factors are occured at springing.

• 복합신소재구조학회 논문집
• /
• 제6권4호
• /
• pp.24-29
• /
• 2015

Bridge construction cost estimates have generally been conducted by using historial unit-price(per meter or square meter). The traditional estimating method based on unit-price references can never completely reflect the specialty of cable supported bridge. In this paper, we have developed the system for supporting the approximate construction cost and the quantity estimation based on 3D model information in the pre-project planning phase of 3-span continuous suspension bridge with 2-pylons. First of all, we'd analyzed the design information (such as structural design report, blueprint and quantity) and the real cost data from the existing suspension bridges and derived the design variables of the bridges. We developed the BIM wizard that generates a suspension bridge model parametrically based on derived design variables. The principle material quantities of suspension bridge are calculated directly from 3-dimensional bridge model built by using the BIM wizard. We have established the system that the construction cost can be estimated more specific than the traditional estimating method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.71-79
• /
• 2008

The concrete track is being used at the Phase II of the Kyeongbu High Speed Railway and New Constructed Honam High Speed Railway. When it makes a decision of bridge type, It has to consider about longitudinal forces of Continuous Welded Rail, Displacement at the end of bridges, Up-lift forces for fastener on the track. If it is installed turnout on the bridge, There is likelihood of the deck twist by applying the each difference longitudinal forces at the 4 each rails and the buckling by concentration of rail stress at the turnout. Moreover, If it is installed turnout on the continuous bridge and REJ(Rail Expansion Joint) on the main track or turnout track. It is hard to keep a safety for rail because of coming to twist or folding at the expansion of deck on the turnout track. Therefore when it is a design of bridge with turnout. It need to take bridge type to minimize an additional axial force and a displacement at the turnout. This paper makes a study of the composite steel arch bridge that is able to resolve criteria requirements of safety for track with turnout and suggest a helpful design method for bridge considering track with turnout by being based on design and construction method of Eonyang Bridge at the north part of Ulsan Station in Phase II of the Kyeongbu High Speed Railway.

• 한국지진공학회논문집
• /
• 제24권4호
• /
• pp.169-178
• /
• 2020

In a previous paper, ambient vibration tests were conducted on a cable stayed bridge with resilient-friction base isolation systems (R-FBI) to extract the dynamic characteristics of the bridge and compare the results with a seismic analysis model. In this paper, a nonlinear seismic analysis model was established for analysis of the bridge to compare the difference in seismic responses between nonlinear time history analysis and multi-mode spectral analysis methods in the seismic design phase of cable supported bridges. Through these studies, it was confirmed that the seismic design procedures of the "Korean Highway Bridge Design Code (Limit State Design) for Cable Supported Bridges" is not suitable for cable supported bridges installed with R-FBI. Therefore, to reflect the actual dynamic characteristics of the R-FBI installed on cable-supported bridges, an improved seismic design procedure is proposed that applies the seismic analysis method differently depending on the seismic isolation effect of the R-FBI for each seismic performance level.

• 한국강구조학회 논문집
• /
• 제28권6호
• /
• pp.449-458
• /
• 2016

강박스거더교의 온도하중을 위한 유효온도를 산정하기 위하여, 강박스거더교의 시험체와 실교량에서 온도 데이터가 2년간 측정되었다. 이 실험체와 실교량의 온도 측정결과를 바탕으로 대기온도에 대한 최고 및 최저 유효온도를 2014년, 2015년, 그리고 연속 2년간 산정하였다. 산정된 최고, 최저 유효온도는 EURO code, 그리고 현행 도로교 설계기준과 서로 비교 평가되었다. 2년간(2 year) 측정한 데이터 기준으로 최대 유효온도와 Euro code의 결정계수는 교량 시험체에서 R=0.894, 실교량에서 R=0.927이 산정되며, 최저 유효온도는 교량 시험체에서 R=0.992, 실교량에서 R=0.813이 산정되었다. 또한 연구 결과는 도로교설계기준(한계상태설계법)의 최고온도와 유사하든가 약간 초과하는 것으로 평가되었다.

• 한국조경학회지
• /
• 제33권5호통권112호
• /
• pp.15-30
• /
• 2005

A deserted town once vibrant with active commercial activities around a railroad station now tries to find a way to escape from depression and revive its life with a renewed civic pride. An open space adjacent to the Main Street, the commercial district of Buzzards Bay, Massachusetts, is waiting to be transformed and reconfigured to be a new ecological park to boost the economy of the community. Bridge Park is 26-acre land abutting the Cape Cod Canal with a railroad bridge as a backdrop. The existing condition of the site with a small salt marsh, woodland, lawn, and the vestige of old railroad easement along with the proximity to the commercial district poses an interesting question of how to make a medium scaled ecological park within an urban context. This paper examines the winning design proposals for the Bridge Park submitted to the International Design Competition held in April, 2005. Six winning proposals were introduced and discussed in terms of categories related to the trend of contemporary landscape design such as; 1) ecological ordinariness and geometric figures, 2) topography and spatial imagination, 3) minimal programs and open put 4) time and process oriented design, 5) park and economic effects and 6) diagrammatic plan and photo montage. Bridge Park Design Competition confirms the complex characteristics representing the contemporary landscape design overcoming the dichotomy between nature and culture and the 'pastoral ecological design' and 'landscape as an art'. The Park becomes the activating agent for the community rejecting the conventional and passive role as a romantic picturesque landscape. Bridge Park International Design Competition is a meaningful event to test the idea of new ecological urban park, and to fine-tune the trend of the contemporary urban park design.

• 한국전산구조공학회논문집
• /
• 제30권2호
• /
• pp.185-189
• /
• 2017

일반교량 내진설계의 목적은 지진발생 직후에 긴급차량의 통과를 허용하도록 하는 '붕괴방지설계'의 수행이다. 도로교설계기준은 연성구조를 구성하여 '붕괴방지설계'를 수행하는 규정을 제시하고 있으며 이 과정에서 연결부분과 하부구조에 적용하는 응답수정계수가 핵심적인 역할을 한다. 하부구조 응답수정계수의 경우 도로교설계기준은 연성과 여용력을 고려한 계수인 반면 AASHTO LRFD 교량설계기준은 교량의 중요도를 핵심, 중요 및 일반으로 구분한 인위적인 인자를 추가로 반영한 계수를 제시하고 있다. 이 연구에서는 강재받침과 철근콘크리트 교각기둥으로 구성된 일반교량을 선정하고 도로교설계기준의 설계조건과 함께 하부구조 응답수정계수를 차등 적용하는 경우의 설계결과를 비교, 검토하였으며 이로부터 하부구조 응답수정계수의 차등 적용 시 설계기준에 요구되는 보완사항을 제시하였다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1318-1323
• /
• 2009

In recent years, dramatic advances in information technology have motivated the construction industry to improve its productivity. Computer-based information technology includes Computer-Aided Design (CAD), Computer-Aided Engineering (CAE), Computer-Aided Manufacturing (CAM), Enterprise Resource Planning (ERP), Digital Mock-Up (DMU) and Product Data Management (PDM). Most construction industries are trying to apply these technologies for quality improvement, reduction of construction time and cost. PDM is very useful for managing data and process related to product design and manufacturing. PDM system has various functions such as drawing and engineering document management, product structure and structure modification management, part classification management, workflow management, and project management. In this paper, PDM system was applied to the design of steel-concrete composite girder bridge. To make a practical guidance for PDM implementation to bridge design, the procedure for its implementation was presented. Consequently, this paper could be useful to enhance the efficiency of bridge design.

• Structural Engineering and Mechanics
• /
• 제48권3호
• /
• pp.395-414
• /
• 2013

The present study fundamentally investigated the mechanical performance of the rib-stiffened super-wide bridge deck with twin box girders in concrete, which is a very popular application to efficiently widen the bridges with normal span. The shear lag effects of the specific cross-sections were firstly studied. The spatial stress distribution and local stiffness of the bridge deck with twin box girders were then investigated under several typical wheel load conditions. Meanwhile, a comparative study for the bridge deck with and without stiffening ribs was also carried out during the investigation; thereby, a design optimization for the stiffening ribs was further suggested. Finally, aiming at the preliminary design, an approximate methodology to manually calculate the bending moments of the rib-stiffened bridge deck was analytically proposed for engineers to quickly assess its performance. This rib-stiffened bridge deck with twin box girders can be widely applied for concrete (especially concrete cable-stayed) bridges with normal span, however, requiring a super-wide bridge width due to the traffic flow.