Journal of the Earthquake Engineering Society of Korea (한국지진공학회논문집)

Earthquake Engineering Society of Korea (한국지진공학회)
권호 표지
DOI QR코드

DOI QR Code

Improvement of the Performance Based Seismic Design Method of Cable Supported Bridges with Resilient-Friction Base Isolation Systems (II-Proposal for the Seismic Design Procedure)

마찰복원형 지진격리장치가 설치된 케이블교량의 성능 기반 내진설계법 개선(II-내진설계 절차 제안)

  • Gil, Heungbae (Super Long Span Bridge R&D Center, Korea Expressway Corporation) ;
  • Park, Sun Kyu (Department of Civil Engineering, Sungkyunkwan University) ;
  • Han, Kyoung Bong (Super Long Span Bridge R&D Center, Korea Expressway Corporation) ;
  • Yoon, Wan Seok (Center for Smart Construction Technology, Korea Expressway Corporation)
  • 길흥배 (한국도로공사 초장대교량연구단) ;
  • 박선규 (성균관대학교 건설환경시스템공학과) ;
  • 한경봉 (한국도로공사 초장대교량연구단) ;
  • 윤완석 (한국도로공사 스마트건설사업단)
  • Received : 2019.11.18
  • Accepted : 2020.04.27
  • Published : 2020.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

In a previous paper, ambient vibration tests were conducted on a cable stayed bridge with resilient-friction base isolation systems (R-FBI) to extract the dynamic characteristics of the bridge and compare the results with a seismic analysis model. In this paper, a nonlinear seismic analysis model was established for analysis of the bridge to compare the difference in seismic responses between nonlinear time history analysis and multi-mode spectral analysis methods in the seismic design phase of cable supported bridges. Through these studies, it was confirmed that the seismic design procedures of the "Korean Highway Bridge Design Code (Limit State Design) for Cable Supported Bridges" is not suitable for cable supported bridges installed with R-FBI. Therefore, to reflect the actual dynamic characteristics of the R-FBI installed on cable-supported bridges, an improved seismic design procedure is proposed that applies the seismic analysis method differently depending on the seismic isolation effect of the R-FBI for each seismic performance level.

Keywords

References

  1. Gil HB, Park SK, Han KB, Yoon WS. Improvement of the performance based seismic design method of cable supported bridges with the resilient-friction base isolation systems (I-Analysis of field testing of cable supported bridge). Journal of the Earthquake Engineering Society of Korea. 2020 Jul;24(4):157-167. https://doi.org/10.5000/EESK.2020.24.4.157
  2. Ministry of Land, Infrastructure and Transportation. Korean Highway Bridge Design Code (Limit State Design) for Cable Supported Bridges. c2016.
  3. Ali HM, Abdel-Ghaffar AM. Seismic energy dissipation for cablestayed bridges using passive devices. Earthquake Engineering and Structural Dynamics. 1994 Aug;23(8):877-893. https://doi.org/10.1002/eqe.4290230805
  4. AASHTO. Design procedures for seismically isolated bridge. Dynamic Isolation System, Inc. Berkeley, CA. c1994.
  5. Shin YS, Park JH, Choi KS, Hong SH. Seismic behavior and economic analysis of bridge for PSC I-Shaped Gider of isolated device. Journal of the Computational Structural Engineering Institute of Korea. 2008 Apr;21(2):145-151.
  6. Ha DH, Koh HM. Earthquake response characteristics of seismically isolated bridges with frictional bearings. KSCE Journal of Civil Engineering. 2000 Nov;20(6-A):937-944.
  7. Yu SM, Lee YI, Ji YS, Choi DS, Kim DK. A study on the application of EQS bearings for seismic isolation of building structures by ICT case study. Journal of the Earthquake Engineering Society of Korea. 2013 Mar;17(2):61-70. https://doi.org/10.5000/EESK.2013.17.2.061
  8. Kim BS, Song JK. Seismic responses of seismically isolated nuclear power plant structure considering post-yield stiffness of EQS bearing. Journal of the Earthquake Engineering Society of Korea. 2016 Sep;20(5):319-329. https://doi.org/10.5000/EESK.2016.20.5.319
  9. Park HG, Lee YI, Jung DY. Experimental and analytical study of the dynamic behavior of a polyurethane spring restoring disk bearing. Journal of the Earthquake Engineering Society of Korea. 2011 Mar; 15(2):61-69. https://doi.org/10.5000/EESK.2011.15.2.061
  10. Asgari B, Osman SA. Application of isolation systems in the seismic control of cable-stayed bridges : A state-of-the-art review. Latest Trends on Engineering Mechanics, Structures, Engineering Geology, International Conference on Geography and Geology. c2010.
  11. Lee YI, Lee YJ, Lee HP, Cho MS, Jee YS, Beak JH. Study on the performance improvement of an EQS device applied nuclear power plant. Journal of the Earthquake Engineering Society of Korea. 2015 Jan;19(1):13-19. https://doi.org/10.5000/EESK.2015.19.1.013
  12. AASHTO. Guide Specifications for Seismic Isolation Design (third editoin). c2010.
  13. Bang IS. Experiences of Sliding Disk Bearing in Korea. 7th World Congress on Joints Bearings and Seismic Systems for Concrete Structures. Las Vegas, Nevada USA. c2011.
  14. MidasIT Co., Analysis Reference.
  15. Park YJ, Wen YK, Ang AH-S. Random vibration of hysteretic systems under bi-directional ground motions. The Journal of the International Association for Earthquake Engineering. 1986 Jul/ Aug;14(4):543-557.
  16. Cho YW, Kim SH, Son YK, Yoo DH. A systematic approach to the geometric control (construction engineering) for long span cablestayed bridges. Korean Society of Steel Construction. c2011. p. 68-76.