• Korean Journal of Microbiology
• /
• v.6 no.4
• /
• pp.141-146
• /
• 1968

Takjoo mashes which were collected from the Takjoo breweries in Seoul area were studied on the purpose of detection for the reciprocal actions between amylase activity and saccharifying ability. The results obtained are as follows. Amylase activity was found to be usually high in the primary brewing process as well as the main brewing process. And especially, .alpha.-amylase in the primary brewing process showed remarkably high activity, more than 5.0 D.P. per/ml of mash comparing with 3.8 D.P. per ml of mash in the main brewing process. However, it was revealed that the reducing sugar contents in the primary brewing process were much higher in its average contents, 5.5%, than 1.1% in the main brewing process.

• Korean Journal of Microbiology
• /
• v.7 no.3
• /
• pp.115-124
• /
• 1969

The mash of Takjoo, Korean flour wine, is fermented through two brewing processes ; the primary brewing process to saccharify and the main one to produce ethyl alcohol. The activities of acid proteinase (pH3), weak acid proteinase (pH 6), and alkaline proteinase (Ph 80 on the processes are determined with time by the Folin phenol method as a strength of casein digestion. Hydrogen ion concentration, the content of total organic acids, protein, free amino acids and oligopeptides, which effect the activities of proteinase, are also measured. The results are briefly summarized as follows : 1. In general, the activities of acid proteinase and weak acid proteinase in the mesh of primary brewing process are stronger than those in main brewing process. 2. The activities of acid proteinase are remarkably stronger than those of weak acid proteinase in both processes. It reveals that they decrease slowly through the fermentation. Activities of alkaline proteinase are weaker than others. 3. As the raw materials are mixtured, the total amount of organic acids is equivalent to 0.150 mg/ml acetic acid in the mesh of primary brewing process and 0.02 mg/ml acetic acid in the main one. They increase gradually with time. 4. Hydrogen ion concnetration shows 3.9 in the mesh of main brewing process and 3.28 in the primary one. They increase to the maximum in 60-72 hrs., and decrease since 108 hrs. 5. The content of crude protein shows 66.90mg/ml in the mesh of main brewing process, while shows 64.29mg/ml in the mesh of primary one. they decrease slowly with time. it seems that a small content of crude protein, as a substrate, converts into amino acids and soluble nitrogen compounds by proteinase. 6. The content of free amino acids and oligopeptides shows 0.36 mg/ml in the mesh of primary brewing process and 0.24mg/ml in the main brewing process. It is evident that the reason they increase continuously through the fermentation is the effect of proteinase. 7. According to the results, the strong activities of proteinase in primary brewing process has been derived from the decrease of hydrogen ion concentration due to the production of organic acids.

• Korean Journal of Microbiology
• /
• v.11 no.4
• /
• pp.167-174
• /
• 1973

This study included two parts of investigation, the microfloral changes during the brewing process with the changes of pH, total acidity, temperature and alcoholic contents, as well as determination of survival times of major enteric pathogens in Takju. 1. Maximum number of Saccharomyces cerevisiae was $4.3{\times}10^7$ per milliliter on the 5th day of fermentation and gradually decreased. Saccharomyces cerevisiae was one of the predominant strains of the fermentation process. The number of Saccharomyces cerevisiae was $4.3{\times}10^6$ per milliliter at the completion of the brewing and human consumption. In a few days after the completion of the brewing. Bacillus subtilis and some species of Staphylococcus spp. began to grow and those organisms were responsible for the spoilage. 2. Maximum pH, during the brewing, was 5.8 on the first day of fermentation and rapidly decreased until 6th day of fermentation at pH 4.3. 3. Maximum alcholic content was 14.5 degree on the 4th day of fermentation, 10.3 degree on the 5th day and this degree was continued during the experimentation. 4. Maximum temperature, during Takju brewing was 34.deg.C on the 3rd day of fermentation and rapidly decreased up to 23.deg.C on the 6th day and this temperature was continued until the brewing process was finished. 5. Maximum total acidity was 0.57 percent on the 4th day of fermentation and gradually decreased by brewing process was completed. 6. Survival time of major enteric pathogenic bacteria in Takju was as follows : Shigella dysenteriae and Escherichia coli were isolated in two hours and 14 hours respectively, but Salmonella typhi, Vibrio parahemolyticus were not isolated even in an hour after the inoculation of those organisms in undiluted Takju. In diluted Takju, Salmonella typhi, Vibrio parahemolyticus were not isolated even in an hour after the inoculation of those organisms in undiluted Takju. In diluted Takju, Salmonella typhi, Shigella dysenteriae, and Escherichia coli were survived for 50-60 hours, but Vibrio cholerae and Vibrio parahemolyticus were not isolated even if treated within one hour.

• Applied Biological Chemistry
• /
• v.33 no.3
• /
• pp.252-256
• /
• 1990

Characteristics of brewing product, Mageoly mashes diluted by the same ratio of water was investigated for alcohol formation, pH change, acid formation nucleotide content and sensory evaluation stored at $3^{\circ}C\;or\;30^{\circ}C$ during 7 days. Each sample was mixed with lysozyme 270ppm and glycine 0.27%, or lysozyme 450ppm and glycine 0.45% on the secondary brewing process in Mageoly brewing. The brewing was not affected by addition of lysozyme and glycine mixture. When the lysozyme-glycine mixture was added during brewing, that resulted in a decrease in pH, a suppression of acid formation and an increase in IMP and inosine content Therefore ere was significantly improved in taste and palatability.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.667-669
• /
• 1987

This paper deals with the automation of the brewing process using digital computer. The work has been carried out to develop real-time control software for fermentation process. From the application of the system, quality improvement and effective process management are achieved.

• Korean Journal of Microbiology
• /
• v.8 no.3
• /
• pp.107-115
• /
• 1970

In order to brew Takju, Korean flour wine, it requires three necessary steps for specific brewage. One is primary brewing process and another main brewing process to sacharify and perform alcoholic fermentation. After previous two brewing passing, the mash of main brewing process mixed with 1 volume of water is commercial Takju. Three samples were obtained from three breweries and incubated at $28{\pm}1^{\circ}C$for the alcoholic fermentation. All the samples were analyzed for observation of the changes of various biochemical constituents which were contained in the mashes of two brewing processes and in Takju. The starch contents of the suspensions in the primary and main mashes, and in Takju were 28.08, 25.92, 3.83%, and decreased considerably within 36-48 hrs and thereafter slowly. The amounts of water soluble carbohydrates and reducing sugars in three steps had a tendency of decreasing within 48 hours. The initial numbers of yeasts per 1ml in the suspensions were $1.74{\times}10^8$, $1.65{\times}10^8$, $0.66{\times}10^8$, appeared the highest at 72 hours (12.66%) in main process, and in the case of Takju kept increasing untill 60 hours. The dextrin contents in the mashe of primary process through the long period were 0.34 - 0.68%, in the main one were 0.12 - 0.32%, concerning with the amylase activities which were stronger in the mash of the primary process than in that of the main. The contents of methanol and cellulose in the mashes of two processes were 3.40-0.68%, in the main one were 0.12-0.32%, concerning with the amylase activities which were stronger in the mash of the primary process than in that of the main. The contents of methanol and cellulose in the mashes of two processes were 3.40-5.98mg/ml, 0.43-0.48% during the fermentation. The consumption of crude protein the mashes of Takju revealed with time, on the contrary, the production of free amino acids and oligo-peptides were performed, depending upon the affection of proteinase. The amount of tannic acid in Takju was 0.0073-0.0098mg/ml and organic acids of these three groups increased with time and hydrogen ion concentration was 3.28-4.43.

• Korean Journal of Plant Resources
• /
• v.28 no.6
• /
• pp.734-742
• /
• 2015

The purpose of this research was to find the most appropriate process for making yacon leaf tea. We applied both green tea and black tea brewing and fermenting methods for producing yacon leaf tea. This research included consumer test and descriptive analysis of professional trained panel on yacon tea tastes and flavors. Both consumer test and descriptive evaluation preferred yacon tea produced by black tea brewing and fermenting methods because it tasted less bitter and had a sweet, delicate taste. According to orthogonal transformation resulting from varimax rotation, first principal component was positively affected by black tea brewing and fermenting methods, while it was negatively affected by green tea brewing and fermenting methods. As a result, the study concluded black tea brewing and fermenting methods were appropriate for producing yacon leaf tea.

• Microbiology and Biotechnology Letters
• /
• v.50 no.3
• /
• pp.404-413
• /
• 2022

The process of manufacturing craft beer involves a wide variety of spontaneous microorganisms, acting in different stages of the brewing process, that contribute to the distinctive characteristics of each style. The objective of this work was to compare the structure of microbial communities associated with two different craft beer styles (Doppelbock and Märzen lagers), at a late maturation stage, and to identify discriminative, or style-specific taxa. Bacterial and fungal microbial communities were analyzed by Illumina sequencing of 16S rRNA gene of prokaryotes and the ITS 2 spacer of fungi (eukaryotes). Fungal communities in maturating beer were dominated by the yeast Dekkera, and by lactic acid (Lactobacillus and Pediococcus) and acetic acid (Acetobacter) bacteria. The Doppelbock barrels presented more rich and diverse fungal communities. The Märzen barrels were more variable in terms of structure and composition of fungal and bacterial communities, with occurrence of exclusive taxa of fungi (Aspergillus sp.) and bacteria (L. kimchicus). Minority bacterial taxa, differently represented in the microbiome of each barrel, may underlie the variability between barrels and ultimately, the distinctive traits of each style. The composition of the microbial communities indicates that in addition to differences related to upstream stages of the brewing process, the contact with the wood barrels may contribute to the definition of style-specific microbiological traits.

• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.509-513
• /
• 2005

The purpose of this study was to develop a new preparation process of ginseng extract using high concentrations of ginsenoside $Rg_3$, a special component in red ginseng. From when the ginseng saponin glycosides transformed into the prosapogenins chemically, they were analyzed using the HPLC method. The ginseng and ginseng extract were processed with several treatment conditions of an edible brewing vinegar. The results indicated that ginsenoside $Rg_3$ quantities increased over 4% at the pH 2-4 level of vinegar treatment. This occurred at temperatures above $R90^{\circ}C$, but not occurred at other pH and temperature condition. In addition, the ginseng and ginseng extract were processed with the twice-brewed vinegar (about 14% acidity). This produced about 1.5 times more ginsenoside $Rg_3$ than those processed with regular amounts of brewing vinegar (about 7% acidity) and persimmon vinegar (about 3% acidity). Though the white ginseng extract was processed with the brewing vinegar over four hr, there was no change for ginsenoside $Rg_3$. However, the VG8-7 was the highest amount of ginsenoside $Rg_3$ (4.71%) in the white ginseng extract, which was processed with the twice-brewed vinegar for nine hr. These results indicate that ginseng treated with vinegar had 10 times the quantity of ginsenoside $Rg_3$, compared to the amount of ginsenoside $Rg_3$ in the generally commercial red ginseng, while ginsenoside $Rg_3$ was not found in raw and white ginseng.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.5
• /
• pp.971-978
• /
• 2014

Investigation of the quality characteristics of Takju brewing mashes prepared with several different yeasts was carried out during the 42-day brewing process, including examination of titratable acidity, amino acid content, sugar contents, alcohol contents, pH, reducing sugar, yeast population, lactic acid bacteria, and sensory evaluation. Fermivin yielded the highest titratable acidity, while la parisienne had the lowest. Fermivin also had the highest value of amino acid content (14.33%), while other yeasts shows period tended to increase over exclude Instaferm and Song chun. The amount of sugars in instaferm ($11.33^{\circ}Bx$) and instaferm red ($10.53^{\circ}Bx$) were higher than those in La parisienne red and Song chun ($9.57^{\circ}Bx$). The alcohol contents of instaferm was the highest value (15.20%) while the alchol content of the other yeasts tended to increase the fementation period. Fermivin had the highest pH at $12^{th}$ day among the yeasts(4.02), Instaferm red had the lowest pH among the yeasts (3.87) while safbrew wb-06 had the highest reducing sugar content(117.60 mg/mL). Instaferm obtained the highest preference in the sensory evaluation for all items.