• Journal of the Ergonomics Society of Korea
• /
• v.36 no.4
• /
• pp.305-323
• /
• 2017

Objective: The purpose of this study was to determine breast shape and ratio of breast enlargement women prior to development of breast enlargement patient's bra. Background: Although there are many previous studies on women's breast that did not undergo breast augmentation surgery, no studies have examined the breast type and proportion of women with breast augmentation. Method: In this study, we analyzed ratios and angles with photographs taken before and after breast augmentation on the frontal and lateral views of the breast, UPF and projection were analyzed too. We also compared the pre-operative and post-operative rates with those of previous breast studies, as well as the post-operative breast types for the desirable breast types. Results: The length and width of the breast base and the height of the breast projection increased after the operation. The rate of increase in width is larger than the vertical distance in the breast base, and the rate of increase in height of the projection is larger than the increase in the width. Specifically, in the vertical distance, the rate of increase in the lower portion is larger than that in the upper portion. In the width, the rate of increase on the inside is larger than that on the outside. Conclusion: The angles of the static relationship with the projection increased and the angles of the minor relation decreased. The changes in the size of the breast were visually observed in the overlapping of the triangle shape before and after the surgery. The changes were composed of the line connecting the angle and the measurement points. The pre-operative upper pole fullness (UPF) was mostly 0 and - 1, but after the surgery, +1, 0, -1, +2 were distributed, while post-operative levels of projection were distributed in the order of level 3> level 1> level 2. In comparison with the desirable breast type, it was found that the anatomical type was a more natural breast type than the round type of implant. Application: These results can be useful as basic data for the breast analysis of breast enlargement patients and their bra patterns.

• Journal of the Korean Home Economics Association
• /
• v.8 no.1
• /
• pp.21-35
• /
• 1970

1. For the purpose of making the basic pattern construction 100 girls attending the Seoul National University College of Home Economics were measured in finding of body size and coefficient of correlation which would be used as one basis of this study. 2. Coefficient of correlation of each body part based on the breast width was shown as follows; Correlation coefficients of bust to waist and hip were high and those of bust to shoulder width, neck height, back width, and breast width were low. None of that was found between bust and back length. It was not recognized so scientific to adjust the basic pattern construction with figures proportioned by those of neck, shoulder width, breast width, and back width. 3. The method of basic pattern construction obtained by this research has been demonstrated in direct wearing since 1967. It is believed that the result will contribute a great benefit in teaching clothing as well as in mass production industry of ready-made garments.

• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.249-267
• /
• 1995

The purpose of this study is to analyze breast shape by age, to classify breast types and then to suggest brassiere size chart. The subject of anthropometric measurement were 232 women in 20's and 40's. The direct anthropmetric measurement were analyzed by mean, standard deviation, duncan test, T-test, ANOVA, factor & cluster analysis The results are as follows; 1) as a result of analysis for the measurements, according to the increase of age, the items of height were decreased and the items of width, depth, cir- cumference, length were increased, being obesity and breast points were dropped. So the volume and bottom area of 40's women's breast were lager than 20's women's. The width of breast points was bide by increasing of intereior. 2) as a result of factor analyxis, 5 factors were extracted as important factor of breast shapes(obesity of breast and location of breast point, breast height and volume, upper dimensions of breast/lower dimensions of breast, interior dimensions of breast/exterior dimensions of breast, volume of the lower part and drop of breast) 3) as a reslut of cluster analysis, the breast shape were classified into 4 types. namely, typel has the smallest volume, bottom area of breast and the slenderest breast, type2 was the second obesity type. type3 was middle sized type. type4 has much dropped, wide bottom area of breast and the biggest form. 4) To establish brassiere sizing system, the loss funtion was used to decide interval of under bust girth and cup size of size chart. 20 brassiere sizes were established and the size chart covers 92.2% of all subject.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.438-451
• /
• 1996

This study was performed to provide basic data for design of maternity brassiere. In order to find out transformation of breast size, shape and volume properties during the period of pregnancy, direct measurements of 306 subjects using Martin's anthropometer and indirect measurements using photography were conducted. And also breast surface area, volume and assumed weight using the molding of adhisive sheet are calculated. The results are as follows; 1) Size (breast widths, depths, girths and lengths) of the breast of pregnant woman are gradually increased during pregnancy. But underbust girth is decreased after delivery. 2) Front view of the breast is gradully dropped and widened. 3) Surface area, volume were measured for each stage of pregnancy, and weights of breasts were estimated. The surface area of breast of latter stage of prgnancy was increased 1.7 times comparing with the early stage. 4) Changes of bust girth, breast depth, underbust girth, volume and estimated breast weight during pregnancy should be considered for cup size, cup shape, width and strain of strap, and width of the wings.

• Journal of the Korean Home Economics Association
• /
• v.39 no.2
• /
• pp.25-40
• /
• 2001

The purpose of this study is to provide for the basic data useful to the development of the quality of brassiere featuring a good wearing feeling and an effect of reinstating and correcting breast shape. For this purpose, 220 adult women aged between 20 and 59 were sampled to survey their actual breast shapes. The results of this study can be summarized as follows; 1 According to the increase of age, the items of height were decreased and items of width, depth, circumference and length were increased, being obeser and breast point were drooped. So volume and bottom are3 of breast of 40.50′s women′s age group were larger than 20.30′s women′s age group and breast point width of 40.50′s women was being wider by increase of interior dimensions of breast. 2. The components of adult women′s breast shape can be categorized into "obesity of breast", "upper dimensions of breast and drop", "lower dimensions of breast and drop", "location of breast point and vertical size of breast", "interior dimensions of breast", "exterior dimensions of breast" Such components of breast shape very in terms of weight or apparence depending on ages. Older women tend to have more droopy and widen breasts.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.1
• /
• pp.13-24
• /
• 2003

The purpose of this study is to design Jugori model compatible with the body types of the middle-aged women especially from 40 to 59 years old. The result is as follows: We decided five items as the necessary items for designing jugori model : the bust girth (the breast & shoulder width), the B.P length, the neck width, the armhole circumference, and Hwa-jang. The breast & shoulder width are the size that comes out if the bust is divided by the breast & shoulder width on the basis of the side line, and Hwa-jang is a length measured with arms stretched out to 0° direction. With each person's physical characteristics considered, the application of the size of each body types and body parts is as follows: 1. The breast & shoulder width (1/4 portion) : We decided B/4+2cm as a standard size and, we adjusted the extra room on the basis of the discrepancy between the breast width and the shoulder width to make it fit well to the each body type. For the breast width (1/2 portion), we bisected the difference between the breast width and the shoulder width of the bust, and moved Gut-sup to the center of the Sup and Sup-sun for An-sup. According to the body type, the movement of the Sup for the people with big breasts gets bigger because there should be a big difference between the breast width and the shoulder width for them, and for the people with small breasts the movement will be relatively smaller. For the shoulder width (1/2 portion), we curved the back center line after we shortened as much as the difference between the amount of the shoulder width/2+1cm and of B/4+2cm. The movement of back center line will be bigger for a person with leaned-backward body type. 2. The front & back length: We made the front length to B.P length+2.5cm to have Jugori cover the breast point fully around the bust line, which is a vogue nowadays. For an upright body type, we decided the back length as (AH/2.2)+5cm. And for a bent-forward and a leaned-backward body type, we adjusted the calculation formulae differently taking the physical characteristics into account. We decided the back length (A) as (A.H/2.2)+5cm, and the front length (B) as the back length+5cm. So, (A+B) is the sum of the front length and the back length. Going back to the original formula, the front length is B.P+2.5cm. So, we can decide the back length if we subtract B.P+2.5cm from the sum of the front length and the back length. To make well-fit Jugoris, the front & back length are areas that we should pay attention to if we take each person's physical characteristics into consideration. 3. Go-dae (1/2 portion) : We decided Go-dae as the neck width/2+0.5cm. For an upright body type, because the base line which went down vertically from the tragion was straight, we generally decided Go-dae Dalim line as 1.0cm. But we decided Go-dae Dalim line down to 1.5cm for bent-forward type and up to 0.2cm for leaned-backward type because the upper half of the body of them was bent forward or leaned backward from the base line. 4. The armhole : We decided the armhole circumference as A.H/2+2cm with the whole extra room of 4cm. 5. The side line length : We can calculate the side line length to (the back length-the armhole)/2, and, in terms of the trend, 2.5cm will be appropriate.

• Korean Journal of Poultry Science
• /
• v.25 no.1
• /
• pp.1-9
• /
• 1998

This study was carried out to get the basic and applicable data for breeding plan and selection in order to improve the body shape components in Korean native chicken. The hentabilities and genetic correlations on body shape components were estimated by sire, dam and combined components of variance. Data analyzed were records of 1,096 progenies produced from 180 dams and 26 sires from April, 1994 to September, 1995. On body shape components at 4, 8 and 16 weeks of age, the shank lengths were 55.63, 82.94 and 103.8Omm: breast girths were 15.087, 21.069, and 26.137mm: breast widths were 40.910, 54.575 and 73.088mm, respectively. The estimates of hentabilities of body shape components based on the variance of sires, dams, and combined components at 4, 8 and 16 weeks of age were O.O65~O.197, O.25O~O.794 and O.185~O.495 for shank length: O.123~O. 215, O.033~O.513 and 0.063~0.257 for breast girth; 0.024~0.158, 0.118~0.410 and 0.111~0.222 for breast width, respectively. The coefficients of genetic correlations among the body shape components at 4 weeks of age were 0.565, 0.725 and 0.678 for breast girth with breast width, shank length and tibia length : 0.690 and 0.804 for breast width with shank length and tibia length; 0.972 between shank length and tibia length.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.385-392
• /
• 2010

The breast types of middle-aged women of 80A (formerly 80B) size were classified through a 3D scanned nude body. Thirty seven measurements including the radius of curvature, surface area, volume, surface length, and breast displacements were used as input variables. We extracted five main factors through the factor analysis of the measurements and classified 36 subjects into 3 clusters through the cluster analysis. As a result of the factor analysis, the size of the breast, breast sag, the curvature of the inner and the outer breast curve, the width of the breast, and the nipple direction were found as the main factors. For the results of the classification of breast types, Cluster 1 was characterized by narrow breast width and unsymmetrical under the breast curve, whereas Cluster 2 was a wide and sagged shape. Cluster 3 was classified into big breast volume and symmetrical under-breast curve. The results are useful to the product development of high quality brassieres which reflect the 3D characteristics of breast types of middle-aged women.

• Journal of Fashion Business
• /
• v.4 no.1
• /
• pp.45-58
• /
• 2000

The purpose of this study is to provide for the basic data useful to the development of a quality bassiere featuring a good wearing feeling, to investigate the characteristics of breast shapes by age and suggest a brassiere sizing system for woman. For this purpose, the subjects of anthropometry were 220 women aged between 20 and 59. The anthropometric measurements were analyzed by various statistical methods mean, standard deviation, F-test, Duncan-test, Factor analysis, frequency. The results of this study can be summarized as follows; 1. According to the increase of age, the items of height were decreased and items of width, depth, circumference and length were increased, being obeser and breast point were drooped. So volume and bottom area of breast of 40 50's women were larger than 20 30's women and breast point width of 40 50's women was being wider by increase of the interior of breast. 2. From analyzing the effect of brassiere wearing, it was found that brassiere reformed the breast shape with the breast volume transferred from exterior part to interior part and the bottom area of breast diminished, so brassiere can have the breast location of adult woman up and the breast point width being centered 3. It was found that there was no direct linear relationships between under bust girth and cup size from analysis of breast measurements. Therefore those 2 factors(under bust girth and cup size) was brought into basic item of brassiere sizing system. From the dual distribution table whose intervals had been decided by KS K-0070(1999), it was picked out 12 sizes which had more than 4% of appearance for suggesting brassiere size chart. The sizing system covers 76.36% of all subjects and supply reference measurements relevant to brassiere manufacturing.

• Journal of the Korean Home Economics Association
• /
• v.34 no.2
• /
• pp.85-97
• /
• 1996

The purpose of this study was to analyze the differences of breast shapes by age, to classify breast types, and to investigate the characteristics of breast shapes by type and the distributions of types by age group, using comparative analysis for women in 20's and 40's. The subjects of anthropometry were 323 women in 20's and 40's. The anthropometric measurements were analyzed by mean, standard deviation, frequency, T-test, F-test, Duncan test, factor and cluster analysis. The results are as follws : 1) According to the increase of age, the items of height were decreased and the items of width, depth, circumference and length were increased, being obeser and breast points were dropped. So the volume and bottom area of 40's women's breast were larger than 20's women's and the breast point to breast point width of 40's women was being wider by the increase of the intereior of breast. 2) 6 factor were extracted from factor analysis by age group. There was no significant difference in consist of factor between age group. There was no significant difference in consist of facotr between age group, but were differences in the connection of factor extracted items and factor loading. Through factor analysis of all age froup, 5 factors were extracted as important factor of breast shapes (obesity of breast and location of breast point ; breast height and volume ; upper dimensions of breast/lower dimensions of breast ; interior dimensions of breast/exterior dimensions of breast ; volume of the lower part and drop of breast). 3) The breast shapes were classified into 4 types by cluster analysis. The frequency of 20's women's breast types appeared in order of type1(53.0%), type3(32.0%), type2(11.0%), type4(4.0%), but that of breast types of 40's women appeared in order of type2(37.9%), type3(31.1%), type4(26.5%), type1(4.5%). Namely, there was few type4 in 20's women and few type1 in 40's women. 20's women's breast types were characterized as type1·3 and type2·3·4 in 40's women. So 40's women had more various breast types than 20's women's.