• 산업기술연구
• /
• 제24권A호
• /
• pp.205-214
• /
• 2004

Static reliability models are introduced to analyze the armor stability of rubble-mound breakwaters. Contrasted to the deterministic model, reliability models can estimate the probability of failure directly and calculate the influence of each design variables quantitatively. Thus, it can be possible to design armor units of the rubble-mound breakwaters rationally. In this study FMA(First-order Mean-value Approach), FDA(First-order Design-value Approach) and AFDA(Approximate Full Distribution Approach) of Level II approach of static reliability methods are used to analyze the armor stability of rubble mound breakwaters. The limitations and applications of each approach are studied straight-forwardly.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.553-556
• /
• 2011

The primary aim of the present study is to propose new design formulae that can be used to evaluate the structural performance of breakwaters installed on container carriers under green water impact loads. A series of numerical analyses for green water impact loads inducing breakwater collapse have been carried out. The well-known fluid-structure interaction analysis technique has been adopted realistically to consider the phenomenon of green water impact loads. The structural behavior of these breakwaters under green water impact loads has also been carried out simultaneously throughout the transient analysis. A verification study of the numerical results was performed using the actual collapse incidents of breakwaters on container carriers. It would be expected that the proposed design formulae, based on the obtained insights, could be used as practical guidelines for the design of breakwaters on container carriers.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.68-78
• /
• 2012

This study proposes an improved 3-D model that includes a new non-reflected wave generation system for oblique incident and multi-directional random waves, which enables us to estimate the effect of the various wave-types on 3-D wave fields in a coastal area with permeable submerged breakwaters. Then, using the numerical results,the three-dimensional wave field characteristics around permeable submerged breakwaters are examined in cases of oblique incident and multi-directional random waves. Especially, the wave height, mean surface elevation and mean flow around the submerged breakwaters are discussed in relation to the variation of incident wave condition.

• 한국해안·해양공학회논문집
• /
• 제24권2호
• /
• pp.138-148
• /
• 2012

경사제에 불규칙하게 작용하는 임의 크기의 다중하중으로 인해 피복재의 안정성에 대한 성능이 시간에 따라 어떻게 달라지는지를 해석할 수 있는 추계학적 신뢰성 해석 모형이 개발되었다. Hudson의 공식과 Melby 공식을 이용하여 재현기간에 따른 파고의 함수로 경사제 피복재의 초기 저항력 크기와 피해율을 확률적으로 산정할 수 있는 새로운 방법이 제시되었다. 생애기간에 대한 신뢰성 분석을 실시하여 시간에 따른 다중하중의 작용과 사용한계나 극한한계 등 한계상태에 따른 구조물의 성능을 올바로 해석할 수 있었다. 마지막으로 보수보강 목표확률을 시간에 따른 누적파괴확률의 결과와 조합하여 구조물 유지관리에서 가장 중요한 변수인 보수보강 시점을 정량적으로 산정할 수 있는 방법이 제시되었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.297-306
• /
• 2014

The paper presents the numerical analysis of wave run-up over rubble-mound breakwaters covered by antifer units using a technique integrating Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD) software. Direct application of Navier-Stokes equations within armour blocks, is used to provide a more reliable approach to simulate wave run-up over breakwaters. A well-tested Reynolds-averaged Navier-Stokes (RANS) Volume of Fluid (VOF) code (Flow-3D) was adopted for CFD computations. The computed results were compared with experimental data to check the validity of the model. Numerical results showed that the direct three dimensional (3D) simulation method can deliver accurate results for wave run-up over rubble mound breakwaters. The results showed that the placement pattern of antifer units had a great impact on values of wave run-up so that by changing the placement pattern from regular to double pyramid can reduce the wave run-up by approximately 30%. Analysis was done to investigate the influences of surface roughness, energy dissipation in the pores of the armour layer and reduced wave run-up due to inflow into the armour and stone layer.

• 대한조선학회논문집
• /
• 제37권3호
• /
• pp.45-56
• /
• 2000

규칙파중 상자형 부유식 방파제의 특성을 살펴보기 위하여 실험과 이론 연구를 수행하였다. 선형포텐셜이론으로 부유식방파제의 특성을 잘 해석할 수 있음을 확인하였다. 투과계수는 파장/부체폭과 부체폭/부체흘수의 비의 함수이며 최소 투과계수가 나타나는 점이 있음을 확인하였다. 부체폭/부체흘수 비가 클수록 최소 투과계수를 가지는 파장/부체폭의 값이 커지며, 과도한 계류력은 부유식방파제의성능을 저하시킬 수 있다.

• 한국해안해양공학회지
• /
• 제13권3호
• /
• pp.230-236
• /
• 2001

본 논문은 2차원 유한요소모델을 이용한 부유식 방파제의 파랑차단특성에 대한 수치적 연구이다. 유체영역은 선형화된 2차원유동으로 가정하고, 부유식 방파제의 성능을 분석하기 위하여 유한요소법을 적용하였다. 상자형 부유식 방파제와 두 개의 상자가 일정한 간격으로 양측 방파제를 대상으로 파랑차단효과 대한 수치해석을 실시하였다. 긴 주기 파랑의 차단효과를 증대시키기 위한 방안 중의 하나로 연직판을 부체 하단에 양측에 부착한 경우에 대한 수치실험을 실시하였다.

• 한국해양공학회지
• /
• 제25권3호
• /
• pp.19-27
• /
• 2011

In case of constructing submerged breakwaters for the purpose of preventing coastal erosion, the number of submerged breakwaters, as well as their asymmetry is dependent on the field conditions. The aim of the present study was to examine the 3-D hydrodynamic characteristics (3-D wave field, wave height, mean water level, and mean flow) around the asymmetric submerged breakwaters using a 3-D numerical model, LES-WASS-3D, which was validated through a comparison with existing experimental data and showed fairly nice agreement. From the numerical results, the wave height, mean water level, and mean flow are discussed in relation with the variation in the breakwater length ratio.

• 한국수자원학회논문집
• /
• 제37권11호
• /
• pp.949-958
• /
• 2004

본 연구에서는 사각형형상 수중방파제에 의한 불규칙파의 반사에 대하여 수리모형실험과 수치모형실험을 수행한 후 실험결과를 비교하였다. 수치해석 모형에서는 Reynolds 방정식을 지배방정식으로 사용하고 난류해석을 위해 k-$\varepsilon$모델을 적용하였으며, 자유수면변위를 추적하기 위해 VOF기법을 사용하였다. 수리모형실험과 수치모형실험의 결과는 서로 잘 일치하였으며, 수중방파제의 배열이 증가함에 따라 반사율은 증가하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.947-964
• /
• 2014

Rubble mound breakwaters protect the coastal line against severe erosion caused by wave action. This study examined the performance of different sizes and properties (i.e. height of vertical wall and tetrapod size) of rubble mound breakwaters on reducing the overtopping discharge. The physical model used in this study was derived based on an actual rubble mound in Busan Yacht Harbor. This research attempts to fill the gap in practical knowledge on the combined effect of the armor roughness and vertical wall on wave overtopping in rubble mound breakwaters. The main governing parameters used in this study were the vertical wall height, variation of the tetrapod weights, initial water level elevation, and the volume of overtopping under constant wave properties. The experimental results showed that the roughness factor differed according to the tetrapod size. Furthermore, the overtopping discharge with no vertical wall was similar to that with relatively short vertical walls (${\gamma}_v=1$). Therefore, the experimental results highlight the importance of the height of the vertical wall in reducing overtopping discharge. Moreover, a large tetrapod size may allow coastal engineers to choose a shorter vertical wall to save cost, while obtaining better performance.