• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.121-127
• /
• 2003

Wave overtopping is one of the most important hydraulic responses of breakwater because it significantly affects its functional efficiency, the safety of transit and mooring on the rear side, wave transmission in the sheltered area, rear side armor stones and to some extent, the structural safety itself. In this study, hydraulic model tests has been carried out to investigate the influence of berm's size on overtopping rate by maximum overtopping rate and mean overtopping rate. The hydrodynamic characteristics of berm breakwater by the overtopping rate can be summarized as follows: 1. It is better to use maximum overtopping rate than to use mean overtopping rate for design of coastal structures in the point of view of stability. 2. When construct berm to decrease energy of waves that it was needed to make breaking conditions of wave on the berm. 3. Under the relative length of berm was over 0.13 overtopping rate was significantly decreased. 4. Overtopping rate affected significantly by the relative length of yhe berm than height of the berm.

• Microbiology and Biotechnology Letters
• /
• v.28 no.4
• /
• pp.195-201
• /
• 2000

Glucoamylase of Saccharomyces diastaticus is produced as a large precursor composed of signal peptide (21 amino acid residues), Thr and Ser-rich region and functional glucoamylase. To evaluate the utility of the glucoamylase signal peptide (GSP) for the secretion of foreign proteins, four types of GSP mutants (ml : Pro-18 longrightarrowLeu-18, m2 : Tyr-13 longrightarrowLeu, m3 : Ser-9longrightarrowLeu-9, m4 : Asn-5 longrightarrowPro-5) were constructed and secretion efficiency of each mutant was compared with that of native GSP by the expression and secretion of Bacillus subtilis CMCase under the control of GAP in N-terminal domain and hydrophobic domain. n mutant 4, a polar amino acid was replaced by a helix - breaking Pro residue. CMCase activity assay and Western blot analysis revealed that CMCase secretion by GSP mutants replaced by Leu were increased compared with native GSP. In the case of m2 and m3, the substitution of Leu for Tyr-13 and Ser-9 in the hydrophobic region resulted in a twofold increase in the extracellular CMCase activity.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.53-57
• /
• 2000

In the present paper, a current technical progress for recycling of used steel can is described. The developed technology was a kind of pre-treatment through an automatic equipment system to increase recycling and melting efficiency of used steel co. The process consisted of several unit processes such as breaking of steel can bale, removing dust, separation of aluminum can, delacquering, and compressing to bale. Also, aluminum powders were recovered as a by-product at the delacquering step. The process was carried out automatically through by use of the developed equipment system. The automatic system could be very available in mass treatment of used steel can.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.98-106
• /
• 2003

To construct pile-supported wharf structures that must support heavy horizontal loads, both vertical piles and batter piles are used. Batter piles are used to secure the bearing capacity against the horizontal loads. However, past case histories have shown that the heads of batter piles are vulnerable because these heads are subjected to excessive axial loads during earthquakes. Therefore, the aseismatic reinforcement method must be developed to prevent batter pile heads from breaking due to excessive seismic loads. Two different connecting methods of either inserting rubber or ball-bearing between batter pile head and upper plate were proposed to improve the aseismatic efficiency. Three large-scale pile head models(rubber type model, ball-bearing type model, and fixed type model) were manufactured and horizontal loading tests were peformed for these models. The results showed that the force-displacement relationship of the fixed type model was linear, but that of the rubber type model and the ball-bearing type model was bilinear. The increase in the horizontal displacement led to the increase in the horizontal stiffness of the rubber type models and the decrease in that of the ball-bearing type model. Compared with the values for fixed type model, the damping ratios of the rubber type model and the ball-bearing type model increased about 33~185％ and 263~269％, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.87-94
• /
• 2012

Mechanical break system used in train, that mixed air break & electronic break system. this system suggest lots of ways for modify efficiency and solution of environmental problems due to recently intend to green growth. The mechanical break system has environmental & economical problem. Environmental sides(problem) are dust and noise etc and economical sides(problem) are replaced the spare parts that are breaking shoe and lining ect. For compensate those kind of weak points, we needs a wide territories of electronic break which is from high speed range to stop. This research is estimated the load torque due to an incline and stop the train method also check the characteristic of stop the train to estimate a torque follow the sharp drop.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.4
• /
• pp.327-332
• /
• 2019

Recently, inverter control systems have attracted immense attention to increase the energy efficiency. However, such systems use repeated on/off high currents for linear operation control, instead of the prevalent step variable current control method. Hence, there arise concerns of personal and property damage, especially due to the durability, explosive characteristics, and operating speed of the fuse, which is responsible for safety and is one of the internal components using current control. Therefore, in this paper, we propose an IEC60127-4 SMD sub-miniature fuse, consisting of Ag-Cu alloys and ceramic powder for arc soothing. The IEC60127-4 SMD sub-miniature fuse has high durability and cut-off capacity, and operates safely in dangerous circumstances caused by the inverter control system.

• Korean Journal of Materials Research
• /
• v.31 no.7
• /
• pp.386-391
• /
• 2021

The formation of CaCO₃ in microalgal culture is investigated and applied for effective separation of microalgae. The presence of several cationic ions in the culture medium mediates the formation of 3 types of mineral precipitates depending on the concentration of mineral precursors, Ca²⁺ and CO₃^2-, amorphous nano-flakes, rhombohedral calcites, and spherical vaterites. While amorphous phased precipitates are formed for all concentrations of mineral precursor, only calcites are formed for 30 mM solutions of mineral precursor, and mixtures of calcites and vaterites are formed for 50 and 100 mM solutions of mineral precursor. The harvesting efficiency is also dependent on the concentration of the mineral precursor: from 90 % for 10 mM to 99 % for 100 mM after 60 mins' of gravitational sedimentation. The formation of nano-flakes on the surface of microalgal cells induces the flocculation of microalgae by breaking the stable dispersion. The negatively charged surface of the microalgal cell is compatible not only with nano-flake attachment but also with the growth of calcitic crystals in which microalgal cells are embedded.

• Korean Journal of Materials Research
• /
• v.28 no.1
• /
• pp.68-74
• /
• 2018

Cobalt-incorporated zeolitic imidazolate framework ZIF-8 was synthesized by a simple one-pot synthesis method at room temperature. Powder X-ray diffraction patterns and energy dispersive X-ray spectrum confirmed the formation of the bimetallic Co/Zn-ZIF structure. UV-Vis diffuse reflectance spectra revealed that the bimetallic ZIF had a lower HOMO-LUMO gap compared with ZIF-8 due to the charge transfer process from organic ligands to cobalt centers. A hydrolytic stability test showed that Co/Zn-ZIF is very robust in aqueous solution - the most important criterion for any material to be applied in photodegradation. The photocatalytic efficiency of the synthesized samples was investigated over the Indigo Carmine (IC) dye degradation under solar simulated irradiation. Cobalt incorporated ZIF-8 exhibited high efficiency over a wide range of pH and initial concentration. The degradation followed through three distinct stages: a slow initial stage, followed by an accelerated stage and completed with a decelerated stage. Moreover, the photocatalytic performance of the synthesized samples was highly improved in alkaline environment rather than in acidic or neutral environments, which may have been because in high pH medium, the increased concentration of hydroxyl ion facilitated the formation of hydroxyl radicals, a reactive species responsible for the breaking of the Indigo Carmine structure. Thus, Co/Zn-ZIF is a promising and green material for solving the environmental pollution caused by textile industries.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.2
• /
• pp.130-140
• /
• 2017

Typically, a submerged breakwater is one of the good scene-friendly coastal structures used to reduce wave energy and coastal erosion. However, sometimes, a submerged breakwater also has a negative aspect in that a strong rip current occurring around an open inlet due to a difference in mean water levels on the front and rear sides of the structure leads to scouring. Such scouring has a bad effect on its stability. In order to eliminate this kind of demerit, this study investigated four new types of submerged breakwaters with drainage channels. First, hydraulic experiments were performed the typical and new structures. Then, the wave height and mean water level distributions around the structures were examined using the experimental results. Finally, it was revealed that the new type of submerged breakwater could efficiently reduce the mean water level on its rear side. In particular, in the case of new-type submerged breakwater 2, an average reduction efficiency of 71.2% for the difference between the mean water levels at the front and rear sides was shown in comparison with the typical one.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.719-725
• /
• 2003

An experiment was conducted to study the requirement of calcium (Ca) and non-phytin phosphorus (NPP) in commercial broilers during starter phase. Seven hundred and twenty day-old Vencob male broiler chicks were randomly distributed into 144 stainless steel battery brooders, 5 birds in each. Four levels each of Ca (6, 7, 8, and 9 g/kg) and NPP (3, 3.5, 4, and 4.5 g/kg diet) were fed in a factorial design in a corn-soya basal diet. Levels of dicalcium phosphate and oyster shell grit were adjusted to obtain the desired levels of Ca and NPP. Each diet was fed ad libidum to chicks in 9 battery brooders from one d to 21 d of age. Body weight gain and feed intake were depressed (p<0.01) by increasing the dietary Ca level (8 and 9 g/kg) at lower levels of NPP (3 and 3.5 g/kg diet). The growth depression observed at lower NPP level was alleviated by reducing the Ca content to 6 g/kg diet. The tibia ash content and tibia breaking strength increased with increase in both Ca (>6 g/kg) and NPP (>3 g/kg) levels. The leg abnormality score decreased (p<0.01) with increase in NPP content in the diet at all levels of Ca tested. The serum Ca and inorganic P levels were increased with increase in the level of the respective mineral in the diet, but the serum concentration of Ca and P were inversely related to the level of NPP and Ca, respectively /kg diet. In general, the excretion of macro minerals (Ca, and P), and micro minerals {zinc (Zn), manganese (Mn), iron (Fe), and copper (Cu)} was significantly lower at lower levels of Ca and NPP tested (6 and 3 g/kg diet, respectively). The mineral excretion increased with increase in dietary Ca and NPP levels, more conspicuously at the disproportionate ratio of these minerals (>2:1, Ca and NPP). Similarly, the retention of Zn, Mn, and Fe in liver was significantly higher (p<0.01) at lower levels of Ca and NPP tested. Results from this study indicate that the commercial broilers do not require more than 3 g NPP and 6g Ca/kg diet during starter phase (up to 21 d of age) for optimum weight gain, feed efficiency and utilization of Ca, P, Zn, Mn, Fe and Cu. However, the requirements of these minerals for optimum bone mineralization were higher than the levels suggested above.