• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.2
• /
• pp.422-429
• /
• 2015

The purpose of this study is the improvement of the existing trolling hauler, which has only one wheel to wind a main line, for saving man power around the coast of Jeju island. The trolling hauler manufactured for a test performance consisted of the wheel part of a main line and the roller part of a leader line including labor-saving devices comprised of a friction clutch, a fastener and springs. Even though this existing electric hauler system is convenient to control the wheel speed and the winding direction, it is apt to cost high and to corrode quickly at sea. Therefore, to remove these negative elements and to operate rollers for hoisting a leader line of the trolling, hydraulic motors were used separately. As a result, according to using of labor-saving devices, the towing tension occurred in operating in fishing ground could be selected moderately without breaking of lines and the operating efficiency of the trolling hauler was verified.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.1
• /
• pp.94-101
• /
• 2015

The heat treatment machine based on immersion was developed to reduce temperature difference during netting process and appraised it performance compared current heat treatment machine using high pressure. It was also reviewed the optimum heat treatment procedures for PBSAT monofilament net in accordance with the immersion time and temperature. The procedure was based on physical measurement such as breaking load, elongation and angle of the mesh for PBSAT monofilament. The water temperature gap of the treatment machine based on immersion was less than $1^{\circ}C$. and the energy consumption was also increased in high temperature condition. It was identified that the optimum temperature was $75^{\circ}C$ and its optimum processing time was between 15 minutes and 20 minutes to get qualified physical properties.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.9
• /
• pp.1353-1362
• /
• 2005

The stressful physiological and environmental conditions around weaning often promote the proliferation of pathogens in the digestive tract of piglets resulting in diarrhoea and reduced daily weight gain. Typical dietary practices to maintain growth performance and health have led to an increased use of antimicrobial growth promoters. Due to the advanced ban of antibiotics in pig production, new concepts have been developed to secure animal health and growth performance, feed efficiency, and product quality as well. Several naturally occurring compounds seem to beneficially affect the composition and activity of the microflora in the gastrointestinal tract (GIT) of pigs. These are, among others, organic acids, probiotics, prebiotics, and enzymes. Organic acids are already widely used, especially in pigs, due to their positive effects on GIT health and growth performance. Probiotics have been shown to be effective against diarrhoea though effects may be dependent on diet composition and environmental conditions. Prebiotics may influence composition and activity of the intestinal microflora. Additionally, pre- and probiotics may exert positive influences on immune response, whereas enzymes may enhance feed digestibility by breaking down anti-nutritional factors. In the following, the focus will be directed to the role of organic acids, probiotics, prebiotics, and feeding enzymes as potential modulators of GIT health.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.4
• /
• pp.511-515
• /
• 2000

Early weaning is a means of breaking the disease cycle from sow to piglet as well as capitalising on the enormous growth potential of the pig. However, the transition from milk to dry diets results in a growth check. Feeding of supplemental milk, fermented to reduce pH and enterotoxigenic bactetial proliferation, may be a means of gradually weaning pigs on to solid feed. This study involved 216 pigs weaned from the sow at 12 days of age, allocated to groups of 6 males and 6 females per weaner pen and allowed ad libitum access to a pelleted diet. In addition, half the pigs were given supplemental fermented skim milk for the first 8 days after weaning. Feeding supplemental fermented milk increased feed intake (104 vs. 157 g DM/d, p=0.011), average daily gain (-3 vs. 112 g/d, p<0.001) and feed conversion efficiency (0.01 vs. 0.81, p=0.003) over the first 8 days after weaning. The improvements observed in the supplemented pigs continued to be augmented such that, by 42 days of age, the pigs that had received supplemental fermented milk were heavier (9.6 vs. 11.5 kg, p=0.003) than their unsupplemented counterparts. Feeding fermented supplemental milk to early-weaned pigs can improve growth performance in the immediate and subsequent post-weaning period.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.57-64
• /
• 2008

In general, the entire of paper mulberry bark, which is not cut into pieces with an appropriate length, have been used in the pulping. This kind of pulping method couldn't accomplish the improvement of beating and sheet forming efficiency. For this reason, we investigated the effects of the cutting length of paper mulberry bast fiber on pulping and Hanji (Korean traditional paper) properties, in order to develop high quality Hanji manufacturing process. The cutting length variation of paper mulberry white bast did not great effects on pulp yields. The pulp yields based on pulping methods were sulfomethylated pulping av. 57.4%, alkali-hydrogen peroxide pulping av. 55.4%, and alkaline pulping av. 53.5% respectively. The optical properties such as brightness, opacity, scattering coefficient, and absorption coefficient were slightly improved by the increase of paper mulberry white bast cutting length. The increase of paper mulberry white bast cutting length resulted in poor sheet formation. Physical properties such as breaking length, TEA, tear index, burst index, and folding endurance were slightly improved by the increase of cutting length. The modified pulping processes, which used sulfomethylated method and alkali-hydrogen peroxide method, showed better pulp and sheet properties than conventional alkaline pulping.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.4
• /
• pp.149-159
• /
• 1996

Multipurpose development of the coast and ocean can be considered as multifunction construction combining the functions of coastal protection, waterfront amenity and creation or rehabilitation of habitats. Multfunction development of coastal and ocean spaces can be accomplished by applying the ecosystem control structure of artificial habitats which will cultivate fishing ground with ecological harmony to the coastal protection system. To evaluate the applicability of ecosystem control structures as as fundamental coastal protection structure, wave control function of the structure is studied by numerical and physical analyses. Dimensional analysis and hydraulic experiment point out the importance of width and crest depth of ecosystem control structure, construction water depth and wave steepness. Wave control efficiency is estimated by the attenuation coefficient $(K_H)$ according to wave steepness $(H_0/L_0)$, relative constructed water depth $(h_i/H_0)$, relative berm width $(B/L_0)$ and relative crest depth $(h_B/H_0)$ of eosystem control structure. Empirical fomulas are suggested based on the results of model test by applying the multiple model based on this experimental results and numerical wave shoaling-dissipation-breaking model appears to be valid for the analysis of wave transformation around ecosystem control structure in the coastal waters.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.58-65
• /
• 2000

Use of a pectinase during preparing handmade papers from bast fiber of paper mulberry(Broussonetia kazinoki Sieb.) was investigated in order to decrease cooking chemicals and environmental pollution. For this purpose, four kinds of commercial pectinases, Rapidase LIQ(RLP), Rapidase Press(RP), Rapidase C80L Max(RCM) and Pectinase SS Kyowa(PSK) were used. And the durability of handmade papers before and after pectinase treatment was determined. RP and PSK had higher pectinase activity ad lower cellulase activity. The bast fiber was not defibered when pectinase was used. In order to increase the efficiency of enzymes, the bast fiber were treated ammonium oxalate(AO) or $K_2CO_3$under mild conditions. The AO pretreatment with those produced by $K_2CO_3$. The RP treated pulps after mild $K_2CO_3$cooking of the bast fiber were defibrated more easily than untreated pulp. The handmade paper prepared with the RP treated pulps after mild $K_2CO_3$cooking has good strength properties such as breaking length and folding endurance. Also, it has higher durability on heat aging, though its brightness was slightly lower than that of untreated paper.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.2
• /
• pp.71-77
• /
• 2015

Upcoming ground-breaking applications for always-on tiny interconnected devices steadily demand two-fold features of processor cores: aggressively low power consumption and enhanced performance. We propose implementation of a novel superscalar low-power processor core with a low supply voltage. The core implements intra-core low-power microarchitecture with minimal performance degradation in instruction fetch, branch prediction, scheduling, and execution units. The inter-core lockstep not only detects malfunctions during low-voltage operation but also carries out software-based recovery. The chip incorporates a pair of cores, high-speed memory, and peripheral interfaces to be implemented with a 65nm node. The processor core consumes only 24mW at 350MHz and 0.68V, resulting in power efficiency of $80{\mu}W/MHz$. The operating frequency of the core reaches 850MHz at 1.2V.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.271-281
• /
• 2010

In an industrial Era, OJT(On-the-Job Training) has been accepted as the field learning. But in a breaking up era, traditional field training needs to change and make an evolutionary model. Also, we need to make evolutionary model for various changing ways and means and need means to maximize the transformation of learning by operating learning organization. In knowledge based society, as people work and learn new knowledge in order to pass the experience knowledge and capabilities, they are not the traditional relationship between trainer and trainee but maximize work and learning, development and performance through several different ways. So, the study about new learning model is needed because the learning is creating the value and makes low cost and high efficiency about the elements of cost and time. We study the evolutionary model, OJF(On-the-Job Facilitating) - new learning methodology - through operating learning organization in S Electronics and its application practices.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.8
• /
• pp.370-376
• /
• 2005

The single-phase induction motor is simple and durable, but the efficiency is low. Therefore, electric motors like HLDC and LSPM(line-start permanent magnet motor) that use the permanent magnet have been studied. The most advantages of single-phase LSPM is having the same stator as the stator of the single-phase induction motor and permanent magnets are just inserted in the squirrel cage rotor of the single-phase induction motor. But the characteristics of single-phase LSPM synchronous motor has very complex characteristics until the synchronization and if the design is not suitable, the single-phase LSPM synchronous motor cannot be synchronized. We designed a single-phase LSPM using the same stator and winding as the conventional single-phase induction motor, but newly designed the permanent magnets considering air gap magnetic flux density. The transient characteristics of the single-phase LSPM is not good because of a magnetic breaking torque, however, it can be improved by redesigning the rotor bars. We are proposed the design method of rotor bar for the single-phase LSPM to start softly and to make synchronization easily.