• 제목/요약/키워드: branching process

검색결과 67건 처리시간 0.028초

Physicochemical Properties of Corn Starch-derived Branched Dextrin Produced by a Branching Enzyme

  • Song, Eun-Bum;Min, Byoung-Cheol;Hwang, Eun-Sun;Lee, Hyong-Joo
    • Food Science and Biotechnology
    • /
    • 제17권2호
    • /
    • pp.234-240
    • /
    • 2008
  • The optimal conditions for the production of branched dextrin from com starch (CSBD) using branching enzyme (BE) were established by investigating the degree of retrogradation of the gelatinized starch. The physicochemical properties of CSBD prepared using the established process were evaluated. It was found that physicochemical properties of com starch were greatly modified by BE treatment. CSBD had a higher dextrose-equivalent value and water solubility than the corresponding control. On the other hand, the viscosities in gelatinized solution and amylose contents of CSBD were lower than those of the control. A high-performance size-exclusion chromatography/multiangle laser light scattering/retractive index (HPSEC/MALLS/RI) system showed that the average molecular weight of CSBD was lower than that of the control. The pasting viscosities of CSBD were stable during the entire temperature cycle. In general, the BE treatment resulted in the retrogradation during storage being lower for CSBD than for the control.

가상벨트 분할에 기반한 등고선으로부터의 표면재구성 방법 (A Surface Reconstruction Method from Contours Based on Dividing Virtual Belt)

  • 최영규;이승하
    • 정보처리학회논문지B
    • /
    • 제14B권6호
    • /
    • pp.413-422
    • /
    • 2007
  • 등고선으로 표현된 물체의 볼륨정보에서부터 3차원 표면을 재구성하는 새로운 알고리즘을 제안한다. 등고선 삼각분할법이라고도 불리는 이 방법의 가장 어려운 문제가 인접 단층사이에서 표면이 다중으로 분기하는 경우에 발생하는데, 이것은 하나의 등고선이 인접한 층의 두 개 이상의 등고선과 연결되는 형태로 나타나며, 표면 생성시 많은 모호성을 발생시킨다. 본 논문에서는 이러한 다중분기문제를 여러 개의 가상벨트와 가상계곡으로 나누어 이들에 대한 표면생성문제로 단순화 시키는 방법을 제안한다. 가상벨트의 표면생성에는 띠분할 알고리즘을 채택하였으며, 가상계곡은 반복적인 볼록정점 제거와 중앙정점 추가로 보다 자연스러운 표면을 생성한다. 기존의 대부분의 알고리즘특이 다중분기문제를 한 쌍의 등고선간의 표면생성문제로 변환하는데 초점을 맞추는데 비해 제안된 방법은 더 작은 형태인 가상벨트와 가상계곡으로 단순화한다. 또한 제안된 방법은 표면정의에 복잡한 기준을 사용하지 않으며, 표면삼각분할을 위한 매우 명확하고 일관된 알고리즘을 제공한다. 실험을 통해 제안된 방법이 많은 분기가 발생하는 복잡한 데이터에서도 잘 동작하는 것을 알 수 있었다.

효과적인 차량 선적을 위한 공간 배치의 최적화 기법 (An Optimization Method of Spatial Placement for Effective Vehicle Loading)

  • 차주형;최진석;배유수;우영운
    • 한국정보통신학회논문지
    • /
    • 제24권2호
    • /
    • pp.186-191
    • /
    • 2020
  • 이 논문에서는 차량 운반선에서 선적 계획과 하적 계획에 따른 차량 선적을 효과적으로 진행하기 위하여, 선박 내 데크에 차량을 효율적으로 배치하는 최적화 기법을 제안하였다. 이를 위해, 선박의 공간 정보를 나타내는 XML 데이터의 변환, 병합 및 분할 알고리즘, 유전자 알고리즘을 활용하였으며, 또한 최적화된 차량 배치 결과를 시각화하는 기능까지 구현하였다. 기존의 전형적인 유전자 알고리즘에서 사용되는 선택, 교차, 변이, 엘리트 보존 등의 기법들을 활용하였으며, 특히 차량의 선적을 위한 선박 공간을 병합 및 분할하는 기법을 함께 제안하여 차량 배치 최적화 기법을 제안하였다. 실험 결과, 기존의 유전자 알고리즘만으로 최적화하기 힘든 부분에 제안한 병합 및 분할 기법을 적용하는 것이 최적화 과정에 효과적이었음을 확인할 수 있었다. 또한, 시각화 기법을 통해 차량 배치 결과를 도면 형태로 보여줌으로써 배치 결과의 효율성을 전문가가 쉽게 판단할 수 있도록 하였다.

토너 바인더용 분지화된 탄성 폴리에스테르 공중합체의 합성: 분지제의 영향 (Preparation of Elastic Branched Copolyester for Toner Binder: Effects of Branching Agents)

  • 노형진;임종관;이동호;윤근병
    • 폴리머
    • /
    • 제36권4호
    • /
    • pp.440-447
    • /
    • 2012
  • 분지화된 폴리에스테르계 공중합체를 제조하고, 공중합체의 분자량, 용융점도, $T_g$, 1/2 method temperature($T_{1/2}$) 및 레올로지 특성을 고찰하여 레이저 프린터 토너 바인더로의 적용을 검토하였다. 디메틸테레프탈레이트(DMT), 에틸렌글리콜(EG), 2,2-bis(4-(2-hydroxypropoxy)phenyl)propane(HPP)으로 제조한 선형공중합체는 분자량이 낮고, 용융탄성이 낮아 이를 개선하기 위하여 분지제로 3 또는 4 관능기를 가진 2-(hydroxymethyl)-2-ethylpropane-1,3-diol(trimethylol propane, TMP), 2,2-bi(hydroxymethyl)-1,3-propanediol(pentaerythritol, PER), 1,2,4-benzenetricarboxylic anhydride(trimellitic anhydride, TMA), 글리세롤 등을 첨가하여 분지화된 공중합체를 제조하였다. 분지제의 함량과 종류에 따른 열적, 레올로지 특성을 고찰하였다. 분지제의 함량이 15 mol% 이상 첨가한 공중합체는 $140^{\circ}C$ 정도의$T_{1/2}$ 값을 가지고, 높은 분자량과 용융탄성을 나타내어 토너를 융착 인쇄하는 레이저 프린터의 핫멜트 토너로서 적당하였다.

GENERALIZED $BARTOSZY\'{N}SKI'S$ VIRUS MODEL

  • Kim, Yong-Dai
    • Journal of the Korean Statistical Society
    • /
    • 제35권4호
    • /
    • pp.397-407
    • /
    • 2006
  • A new stochastic process is introduced for describing a mechanism of viruses. The process generalizes the $Bartoszy\'{n}ski's$ process ($Bartoszy\'{n}ski$, 1975a, 1975b, 1976) by allowing the stochastic perturbation between consecutive jumps to take into account the persistent infection (the infection without breaking infected cells). It is shown that the new process can be obtained by a weak limit of a sequence of Markov branching processes. Along with the construction of the new process, we study how the stochastic perturbation influences the risk of a symptom in an infected host. For this purpose, the quantal response model and the threshold model are investigated and compared through their induced survival functions.

Photoelectron Imaging Spectroscopy for (2+1) Resonance-Enhanced Multiphoton Ionization of Atomic Bromine

  • Kim, Yong-Shin;Jung, Young-Jae;Kang, Wee-Kyung;Jung, Kyung-Hoon
    • Bulletin of the Korean Chemical Society
    • /
    • 제23권2호
    • /
    • pp.189-194
    • /
    • 2002
  • Two-photon resonant third photon ionization of atomic bromine $(4p^5\;^2P_{3/2}\;and\;^2P_{1/2})$ has been studied using a photoelectron imaging spectroscopy in the wavelength region 250 - 278 nm. The technique has yielded simultaneously both relative branching ratios to the three levels of $Br^+(^3P_2,\;^3P_{0.1}\;and^1D_2)$ with $4p^4$ configuration and the angular distributions of outgoing photoelectrons. The product branching ratios reveal a strong propensity to populate particular levels in many cases. Several pathways have been documented for selective formation of $Br^+(^3P_2)$ and $Br^+(^3P_{0.1})$ ions. In general, the final ion level distributions are dominated by the preservation of the ion core configuration of a resonant excited state. Some deviations from this simple picture are discussed in terms of the configuration interaction of resonant states and the autoionization in the continuum. The photoelectron angular distributions are qualitatively similar for all transitions, with a positive $A_2$ anisotropy coefficient of 1.0-2.0 and negligible $A_4$ in most cases, which suggests that the angular distribution is mainly determined by the single-photon ionization process of a resonant excited state induced from the third photon absorption.

무제한 3차원 절단문제를 위한 새로운 분지 한계법 (A New branch and bound algorithm for unconstrained three-dimensional cutting problems)

  • Young-Jo Seong;Maing-Kyu Kang
    • 한국컴퓨터산업학회논문지
    • /
    • 제5권3호
    • /
    • pp.377-382
    • /
    • 2004
  • 무제한 3차원 절단문제는 커다란 직육면체 자재에서 작은 직육면체 제품을 잘라낼 때, 잘라낸 제품의 가치가 최대가 되도록 하는 절단패턴을 찾는 문제이다. 이 때, 잘려지는 각각의 제품은 고유의 크기와 가치를 갖는다. 두 개의 절단패턴을 결합해서 새로운 절단패턴을 만들어 내는 상향식 접근법은 무제한 3차원 절단문제를 푸는 해법으로 사용할 수 있다. 본 논문에서는, Wang이 제안한, 2차원 문제에서 사용되는 두 가지 결합 외에 새로운 결합을 정의하고, 지 등이 무제한 2차원 절단 문제를 풀기 위해 제안한 분지전략을 3차원 문제에서 사용할 수 있도록 새롭게 재구성한다.

  • PDF

S-XML 데이터의 효율적인 X-Path 처리를 위한 색인 구조 (An Index Structure for Efficient X-Path Processing on S-XML Data)

  • 장기;장용일;박순영;오영환;배해영
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2005년도 춘계학술발표대회
    • /
    • pp.51-54
    • /
    • 2005
  • This paper proposes an index structure which is used to process X-Path on S-XML data. There are many previous index structures based on tree structure for X-Path processing. Because of general tree index's top-down query fashion, the unnecessary node traversal makes heavy access and decreases the query processing performance. And both of the two query types for X-Path called single-path query and branching query need to be supported in proposed index structure. This method uses a combination of path summary and the node indexing. First, it manages hashing on hierarchy elements which are presented in tag in S-XML. Second, array blocks named path summary array is created in each node of hashing to store the path information. The X-Path processing finds the tag element using hashing and checks array blocks in each node to determine the path of query's result. Based on this structure, it supports both single-path query and branching path query and improves the X-Path processing performance.

  • PDF

Chemical Modification of Isotactic Polypropylene by Melt Blending

  • Kim, Jun-Young;Seo, Eun-Su;Park, Dae-Soon;Park, Kwang-Min;Kang, Seong-Wook;Lee, Chang-Hyung;Kim, Seong-Hum
    • Fibers and Polymers
    • /
    • 제4권3호
    • /
    • pp.107-113
    • /
    • 2003
  • The branched polypropylene (b-PP) was prepared by melt blending process with initiator, antioxidant, and functional monomers to improve the melt strength through the melt grafting. The melt flow index (MFI) of the b-PP was increased with increasing the initiator content. On the introduction of the alkylamine as the branching agents the MFI of the b-PP was increased, while that of the b-PP with the pentaerythritol triacrylate (PT) was decreased. It may be caused by the chain scission of the i-PP backbone due to the reduced thermal stability of the i-PP on the melt blending. The MFI of the b-PP without the antioxidant was increased due to the chain scission occurred during the melt processing, while on the introduction of the antioxidant, the MFI of the b-PP was decreased. The crystallization temperature of the b-PP was higher than that of PP, which was attributed to the branched chain structure. It was found that the PT was the most effective functional monomers for enhancing the melt properties of the b-PP.