• Title/Summary/Keyword: branched

Search Result 884, Processing Time 0.025 seconds

A Study on the Initial Crack Curving Angle of Isotropic/Orthotropic Bimaterial

  • Hawong, Jai-Sug;Shin, Dong-Chul;Lee, Ouk-Sub
    • Journal of Mechanical Science and Technology
    • /
    • v.16 no.12
    • /
    • pp.1594-1603
    • /
    • 2002
  • In this paper, when the initial propagation angle of a branched crack is calculated from the maximum tangential stress criterion (MTSC) and the minimum strain energy density criterion (MSEDC), it is essential that you use stress components in which higher order terms are considered and stress components at the position in a distance 0.005㎜ from the crack tip (=r). When an interfacial crack propagates along the interface at a constant velocity, the initial propagation angles of the branched crack are similar. to the mode mixities (phase angle) and the theoretical values obtained from MTSC and MSEDC. The initial propagation angle of the branched crack depends considerably on the stress intensity factor K$_2$.

Effect of chain structure of polypropylenes on the melt flow behavior

  • Lee, Young-Jun;Sohn, Ho-Sang;Park, Seung-Ho
    • Korea-Australia Rheology Journal
    • /
    • v.12 no.3_4
    • /
    • pp.181-186
    • /
    • 2000
  • Rheological Properties of polypropylenes having different molecular structures (linear polypropylene (PPL) and branched one (PPB)) were studied. Both the extensional flow and oscillatory shear flow properties were checked. Especially, the melt strength of polypropylenes having various shear history were investigated by using in-house-made Rheometer (called SMER). Compared to linear polypropylene, the branched polypropylene shows enhanced melt strength during extensional flow due to the retarded relaxation of molecules. When the slope of melt tension was plotted against take up speed of melt strand, the characteristic peak was observed in case of branched polypropylene, while the linear polypropylene shows only monotonously decreasing pattern. This entanglement was partially disrupted by physical forces such as shear during melt extrusion. However, the melt strength of PPB after multiple extrusion is still higher than PPL, implying the loss of elasticity during multiple extrusion is not so comprehensive. On dynamic experiments, PPB shows typical shear thinning behavior and the tangent delta of PPB is lower than PPL, reflecting high elasticity of PPB.

  • PDF

Enzymatic Synthesis of L-tert-Leucine with Branched Chain Aminotransferase

  • Seo, Young-Man;Yun, Hyung-Don
    • Journal of Microbiology and Biotechnology
    • /
    • v.21 no.10
    • /
    • pp.1049-1052
    • /
    • 2011
  • In this study, we demonstrated the asymmetric synthesis of L-tert-leucine from trimethylpyruvate using branched-chain aminotransferase (BCAT) from Escherichia coli in the presence of L-glutamate as an amino donor. Since BCAT was severely inhibited by 2-ketoglutarate, in order to overcome this here, we developed a BCAT/aspartate aminotransferase (AspAT) and BCAT/AspAT/pyruvate decarboxylase (PDC) coupling reaction. In the BCAT/AspAT/PDC coupling reaction, 89.2 mM L-tert-leucine (ee>99%) was asymmetrically synthesized from 100 mM trimethylpyruvate.

A Study of the Gas Liquid Partition Coefficients of Eleven Normal, Branched and Cyclic Alkanes in Sixty Nine Common Organic Liquids: The Effect of Solute Structure

  • Cheong, Won-Jo
    • Bulletin of the Korean Chemical Society
    • /
    • v.23 no.3
    • /
    • pp.459-468
    • /
    • 2002
  • Literature data measured by the author have been processed to report on the effect of solute structure on gas liquid partition coefficients of eleven normal, branched and cyclic alkanes ranging in carbon number from five to nine in sixty nine low molecular weight liquids. The alkane solutes are n-pentane(p), n-hexane(hx), n-heptane(hp), n-octane(o), n-nonane(n), 2-methylpentane(mp), 2,5-dimethylpentane(dp), 2,5-dimethylhexane(dh), 2,3,4-trimethylpentane(tp), cyclohexane(ch), and ethylcyclohexane(ec). The solvent set encompasses most of those studied by Rohrschneider as well as three homologous series of solvents (n-alkanes, 1-alcohols and 1-nitriles) and several perfluorinated alkanes and highly fluorinated alcohols. An excellent linear relationship was observed between lnK and the carbon number of n-alkanes. The effective carbon numbers of branched and cyclic alkanes were determined in a similar fashion to the method of Kovats index. We found that the logarithm of solute vapor pressure multiplied by solute molar volume was a perfect descriptor for the linear relationship with the median effective carbon number.

New Retention System Using Branched Polymer

  • Son, Dong-Jin;Kim, Bong-Yong
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2006.06b
    • /
    • pp.251-256
    • /
    • 2006
  • The purpose of this study was to confirm multiple retention system of C-PAM, A-PAM and Inorganic micro particles vs. traditional micro particle system and dual polymer system by measuring retention, drainage and formation using RDA HSF and Techpap 2D -F Sensor The benefits of dual polymer system were easy to use, low chemical consumption and good retention property but defect was worse drainage property than inorganic microparticle systems. On the other hand, Inorganic microparticle system had benefit of good drainage effect but defects were difficult to use, high chemical consumption. Therefore, we tried to find optimal morphology of polyacrylamide and applied to multiple retention system of C-PAM, A-PAM and inorganic microparticles to compensate defects of both of retention systems. As a result, we found the performance of branched C-PAM, branched A-PAM and inorganic micro particle triple system was more appropriate than traditional inorganic mircoparticle systems or dual polymer systems by comparing retention, drainage and formation.

  • PDF

Synthesis and Antiviral Activity of Novel 2′-Methyl and 4′-Phenyl Branched Carbocyclic Nucleosides (2′-메칠 및 4′-페닐 측쇄를 가진 새로운 카보사이클릭 뉴크레오사이드의 합성 및 항바이러스 약효검색)

  • 양선화;홍준희
    • YAKHAK HOEJI
    • /
    • v.48 no.1
    • /
    • pp.88-92
    • /
    • 2004
  • In this study; a series of 2',4'-doubly branched carbocyclic nucleosides (8,9,10) were synthesized from simple acyclic ketone derivative as starting material. The installation of the 4'-quaternary carbon needed was carried out using a 〔3,3〕-sigmatropic rearrangement. In addition, the introduction of a methyl group in the 2'-position was accomplished by Grig-nard reaction. Bis-vinyl was successfully cyclized using a Grubbs' catalyst II. The natural bases (adenine, cytosine, uracil) were efficiently coupled with the use of a Pd(0) catalyst. Although all the synthesized compounds were assayed against several viruses, only cytosine analogue 9 showed weak antiviral viral activity (EC$_{50}$=45.4 $\mu$M) against CoxB3 virus.s.

Fibers Flocculation and Physical Properties Changes of Paper Depending on Cationic Polymer Addition (양이온성 고분자 첨가에 따른 섬유의 응집 및 종이 물성 변화)

  • Yoon, Doo-Hoon;Park, Jong-Moon
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.37 no.1 s.109
    • /
    • pp.10-16
    • /
    • 2005
  • Flocculation of fibers and its distribution in paper are related to flocculation mechanisms, retention and drainage. Relationship between flocculation mechanisms and physical properties of paper has not been fully studied. In this study, flocculation of fibers was investigated by changing cationic polymers for flocculation mechanism analysis. Flocculation of stock and physical strength of paper were similar when using branched PAM and linear PAM with fillers and microparticles Flocculation and physical strength were also similar when using branched PAM and linear PAM and microparticles without fillers. In that case excessive flocculation was not produced, so formation was improved but physical strength was decreased. When using branched PAM instead of linear PAM with filler addition, drainage time was decreased, air permeability was improved, and physical strength was increased.

Stereoselective Synthesis and Antiviral Activity of Novel 4′(α)-Hydroxymethyl and 6′(α)-Methyl Dually Branched Carbocyclic Nucleosides

  • Kim, Jin-Woo;Choi, Bo-Gil;Hong, Joon-Hee
    • Bulletin of the Korean Chemical Society
    • /
    • v.25 no.12
    • /
    • pp.1812-1816
    • /
    • 2004
  • The stereoselective synthesis 4′,6′-dually branched carbocyclic nucleosides was accomplished in this study. The introduction of a methyl group in the 6′$({\alpha})$-position was accomplished by Felkin-Anh controlled alkylation. The construction of the required 4′$({\alpha})$-quaternary carbon was carried out using a [3,3]-sigmatropic rearrangement. Bis-vinyl 6 was successfully cyclized using a Grubbs' catalyst II. The natural bases (adenine, cytosine) were efficiently coupled using a Pd(0) catalyst. When the synthesized compounds were examined for their activity against several viruses such as the HIV-1, HSV-1, HSV-2 and HCMV, the cytosine analogue 13 exhibited good antiviral activity against the HCMV.

Synthesis and Antiviral Activity of Novel 4',5'-Branched Pyrimidine Nucleosides (4',5'-측쇄를 가진 새로운 피리미딘 뉴크레오사이드의 합성 및 항바이러스 약효검색)

  • Kim Aihong;Kooh Dae-Ho;Ko Ok Hyun;Hong Joon Hee
    • YAKHAK HOEJI
    • /
    • v.49 no.1
    • /
    • pp.20-24
    • /
    • 2005
  • The synthesis of 4',5'-doubly branched carbocyclic nucleosides was accomplished in this study. The selective methylation in the 5'-position was made by Felkin-Anh controlled Grignard addition. The construction of the required 4'-quaternary carbon was carried out by using a [3,3]-sigmatropic rearrangement. Bis-vinyl 6 was successfully cyclized using a Grubbs' catalyst II. The natural pyrimidine bases (cytosine, uracil, thymine) were efficiently coupled using a Pd(0) catalyst. When the synthesized compounds were examined for their activity against several viruses such as the HIV-1, HSV-1, HSV-2 and HCMV, the cytosine analogue 13 exhibited weak antiviral activity against the HCMV.

A Study on the Working Pressure of TBP used in Tall Building (초고층건축물에 사용되는 분기배관의 사용압력에 관한 연구)

  • Lee, Sung-Ho;Kim, Hei-Song
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.20 no.5
    • /
    • pp.351-356
    • /
    • 2008
  • In this study, we had the stress analyses of TBP used in Tall Building and determined the working pressure of TBP. We knew the four fact. First, the place acted maximum stress is axial direction of branched part. Second, working pressure is more than 2.0 MPa. Third, stress in branched part is less than yielding strength at hydrostatic test pressure. Fourth, the ratio(stress/yielding stress at hydrostatic test pressure) is $0.4{\sim}0.6$(KS D 3562 Sch 40), $0.3{\sim}0.4$(KS D 3576 20S).