• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.1-14
• /
• 1977

These studies were carried out to know the variation of morphological tree forms, needles, cotyledons, seed characters and top height growth of seedlings of Pinus koraiensis S. et Z. by populations in Mt. Jiri. The results are summarized as follows: 1. It was observed that the characteristics of length, needles of serration density of needles, percentage of full seeds length, of seeds, thickness, of seeds length of cotyledons, width of cotyledon, numbers of the stomata line in cotyledons and the top height growth of seedlings were significantly different in individual trees and populations. 2. The characteristics of branch angle specific gravity of wood and resin canal numbers of cotyledons were significantly different in populations. 3. It was that the characteristics of numbers of stomata line, width, of seeds weight, of seeds serration density of cotyledons, numbers of cotyledons were significantly different in individuals. 4. The resin canals of needles showed three principle resin canals in individual trees and population, and the coefficients of variation were not shown in individual trees and populations. Stem forms showed to be a straight form with all populations. 5. The characteristics of cotyledons had generally higher tendency than the characteristics of needles in comparison with coefficience of variation.

• Korean Journal of Ichthyology
• /
• v.2 no.2
• /
• pp.149-158
• /
• 1990

The brook lamprey, Lampetra reissneri, was collected from an branch of the Nakdong River (Namwon-gun, Chollabuk-Do) and the Seomjin River (Hadong-Gun, Kyungsangnam-Do) from September, 1989 to April, 1990. Specimens were 95 individuals in number and composed of 21 ammocoetes, 16 metamorphosing animals and 58 adults which do not exceed 200mm in total length. The modal numbers of trunk myomer was 57.5, ranged from 55 to 60. In the dental formula, the supraoral tooth consistently had 2 cusps, and lateral circumorals were 3 in each side with 2 cusps. The infraoral had varying numbers of cusps ranging from 6 to 8. In morphological measurement of adults, prebranchial length was 10.3%, branchial length 9.7%, trunk length 51.3% and tail length 28.3% respectively, in hundreds of total length. No significant differences in morphological characteristics were observed between the two populations studied.

• Horticultural Science & Technology
• /
• v.30 no.3
• /
• pp.325-328
• /
• 2012

A new Dendranthema grandiflourm 'My Sun' was developed at Gyeonggi-do Agricultural Research & Extension Services (GARES), Korea in 2009. 'My Sun' was initially derived from the cross in 2005 between 'Omega Time Orange', a potted chrysanthemum cultivar with orange single type, and 'Tasman', a potted chrysanthemum cultivar with white single type in 2005. The cultivar has single type flowers with yellow petals. Trial and evaluation was conducted from 2006 to 2009 for the selection of this variety, including a shading culture in spring and a retarding culture in winter. The flowering time of 'My Sun' was October 13th, and year-round flowering is possible by shading or lighting treatment. The diameter of flower is 21.0 mm. Numbers of flowers per stem and petals per flower are 34.4 and 20.4, respectively. Its leaf color was green (Green Group 137A) and plant height was 13.3 cm. Days to flowering under the short day treatment is about 42 in spring, and numbers of branch per plant was 3.4 ea in the winter. This cultivar was resistance to white rust and consumer's preference of new pot-mum is high level than control.

• ALGAE
• /
• v.19 no.1
• /
• pp.49-57
• /
• 2004

This study was performed to obtain basic information on the ecology of Zostcra marina and to promote efficient conservation of this species which has been decline in Gamak Bay, Yeosu, Korea. Whater column characteristics and eelgrass morphology at Anpori, Jangsuri and Wonpori were investigated every month from December 1999 to November 2000. The water temperature, salinity and pH at the three sites were 10.0-27.0${\circ}C$,29.4-34.7% and 8.1-8.5, respectively. The water temperature at Anpori tended to be slightly lower than that at the other locations; the salinity at Wonpori from July to November was a little lower than that of the other locations. The concentrations of $NO_2$-N, $NO_3$_N, $NH_4$-N, $PO_4$-P and $Si(OH)_4$-Si at the three sites were 0.9-1.3, 2.0-6.2, 7.8-9.0, 3.0-3.6 and 22.2-30.2 uM, respectively. The concentration of $NO_3$-N at Wonpori from June to November was somewhat lower than that at the other locations; that of NH4-N at Jansuri was somewhat lower than the others. The mean shoot height and leaf width of the Anpori, Jangsuri and Wonpori populations were 80.6 cm and 0.9 mm, 90.0 cm and 1.0 mm, and 95.3 cm and 1.0 mm, respectively. The mean total shoot weight of the Anpori, Jangsuri and Wonpori ones was 24.5,31.0 and 29.7 & respectively. The mean leaf and branch numbers of the Anpori, Jangsuri and Wonpori populations were 16.5 and 2.6, 16.1 and 2.4 and 15.4 and 2.6 individuals, respectively. The correlation coefficients between shoot height and water temperature, leaf width and total shoot weight, leaf number and branch number, and $Si(OH)_4$-Si and $NO_3$-N were 0.726, 0.692, 0.862, and 0.693, respectively. The coefficients between shoot height and $NO_3$-N, total shoot weight and NO_3$-N, water temperature and $Si(OH)_4$-Si, water temperature and salinity, and water temperature and $NO_3$-N were -0.716, -0.536, -0.775, -0.685 and -0.685, respectively. The first four principal components explain 71.1% of the total sample variance. For axis 1, shoot height and water temperature tended to correlate with the population of Jansuri, followed by the Wonpori population, and $Si(OH)_4$-Si and $NO_3$-N tended to correlated strongly with the Anpori population. For axis 2, total weight, leaf width, leaf number and branch number showed a tendency to correlate with the Anpori and Jangsuri populations. For axis 3, the Anpori population tended to be influenced by $NO_2$-N and $PO_4$-P. For axis 4, the Wonpori and Jangsuri populations tended to be affected by salinity. The tendency, however, differed according to season.

• Membrane and Water Treatment
• /
• v.10 no.3
• /
• pp.207-212
• /
• 2019

Non-aqueous solvents (NASs) are generally known to be barely miscible, and reactive with polar compounds, such as water. However, water can interact with some NASs, which can be used as a new means for water recovery from saline water. This study explored the fate of water and salt in NAS, when saline water is mixed with NAS. Three amine solvents were selected as NAS. They had the same molecular formula, but were differentiated by their molecular structures, as follows: 1) NAS 'A' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain, 2) NAS 'B' with symmetrical structure and having the hydrophilic group (NH) at the middle of the straight carbon chain, 3) NAS 'C' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain but possessing a hydrophobic ethyl branch in the middle of the structure. In batch experiments, 0.5 M NaCl water was blended with NASs, and then water and salt content in the NAS were individually measured. Water absorption efficiencies by NAS 'B' and 'C' were 3.8 and 10.7%, respectively. However, salt rejection efficiency was 98.9% and 58.2%, respectively. NAS 'A' exhibited a higher water absorption efficiency of 35.6%, despite a worse salt rejection efficiency of 24.7%. Molecular dynamic (MD) simulation showed the different interactions of water and salts with each NAS. NAS 'A' formed lattice structured clusters, with the hydrophilic group located outside, and captured a large numbers of water molecules, together with salt ions, inside the cluster pockets. NAS 'B' formed a planar-shaped cluster, where only some water molecules, but no salt ions, migrated to the NAS cluster. NAS 'C', with an ethyl group branch, formed a cluster shaped similarly to that of 'B'; however, the boundary surface of the cluster looked higher than that of 'C', due to the branch structure in solvent. The MD simulation was helpful for understanding the experimental results for water absorption and salt rejection, by demonstrating the various interactions between water molecules and the salts, with the different NAS types.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.6
• /
• pp.697-704
• /
• 2004

Bifurcation behavior of ignition and extinction of catalytic reaction is theoretically investigated in a stagnation-point flow. Considering that reaction takes place only on the catalytic surface, where conductive heat losses are allowed to occur, activation energy asymptotics with a overall one-step Arrhenius-type catalytic reaction is employed. For the cases with and without the limiting reactant consumption, the analysis provides explicit expressions, which indicate the possibility of multiple steady-state solution branches. The difference between the solutions with and without reactant consumption is in the existence of an upper solution branch, and the neglect of reactant consumption is inappropriate for determining extinction conditions. For larger values of reactant consumption, the solution response is all monotone, suggesting that multiple solutions are not possible. It is shown that bifurcation Damkohler numbers increase (decrease) with increasing of conductive heat loss (gain) on the catalytic surface, which means that smaller (larger) values of the strain rate allow the surface reaction to tolerate larger heat losses (gains). Lewis number of the limiting reactant can also significantly affect bifurcation behavior in a similar way to the effect of heat loss.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.2
• /
• pp.252-263
• /
• 1997

Steady-state two-dimensional natural convective heat transfer in horizontal cylindrical annuli was studied by solving the governing equations based on the primitive variables. Emphasis was put on the occurrence of the multiple solutions at a given set of parameter values, and on the determination of the bifurcation points at which those multiple solutions begin to branch out. The multicellular flow pattern from the results of melting process in an isothermally heated horizontal cylinder for high Rayleigh numbers, was used as initial guesses for the field variables. This was succeeded in new bifurcation point to tetracellular solutions for an identical set of parameter variables of previous works. The close examination of flow pattern transition around bifurcation point was also conducted. It was found that the mechanisms of flow transition are different depending on the critical Rayleigh number of bifurcation point.

• 한국연소학회:학술대회논문집
• /
• 2002.06a
• /
• pp.163-170
• /
• 2002

The main objective of this study is to investigate the correlation of chemical structure and cetane number of reformed diesel fuels by ultrasonic irradiation. In order to analyze the effect of the chemical structure and the cetane number of reformed diesel fuels by ultrasonic irradiation, $^1H-NMR$ was used. From the study, following conclusive remarks can be made. 1) BI(=Branch Index), aromatics percentages, and $H_{\alpha}(={\alpha}-methyl$ functional group) of the reformed diesel fuels by ultrasonic irradiation decreased more than those of the conventional diesel fuel. 2) All the cetane numbers which were calculated from carbon type structure and hydrogen type distribution of the reformed diesel fuels increased more than those of the conventional diesel fuel. 3) Using predicated equation of cetane number caculated from carbon type structure is more reasonable than that caculated from hydrogen type distribution 4) BI, aromatics percentages, and $H_{\alpha}$ on both of conventional fuel and reformed diesel fuels by ultrasonic irradiation are inversely proportional to cetane number on these fuels.

• Asian Journal of Turfgrass Science
• /
• v.3 no.1
• /
• pp.5-12
• /
• 1989

Tiller numbers per Unit area were increased as plant density heightened followed by little difference in tiller number in 110 days after transplanting(ll0DAT), this being caused by the immediate increment of tiller since' 90DAT During the growth period, the greatest number of green leaves per unit area was attained in 90DAT of both 160-density and 200-density plots, and in l00DAT of 40-, 80-, and I 20-density plots. Thus, the period to reach the maximum green leaf number with the high plant density was earlier than with the' low plant density. The increment of plant density increased the DM weight of ahoveground part and, with 40-densitytreatment. DNI weight was increased 6.1 times as much up to 110DAT as up to 7ODAT but 2 to 2.9 times with other ehe'nsity treatments. The' rate of increase in stolon length was greatest at the period between 80 and 90DAT when DM weight of stolon showed a large increment. Meanwhile, the average number of stolon was 1.7 at 70DAT but was increased up to 10 at 110DAT probably due to accelerative appeance of Ist stolon branch since 8.0DAT. DM weight of stolon was found to exceeded that of root after 90DAT Thus it was concluded that, when turfs is estahlished from sprig. it may be desirable for first mowing practice to be made at least within l00 days after planting.

• Computers and Concrete
• /
• v.18 no.1
• /
• pp.39-51
• /
• 2016

This paper considers the tensile strength of concrete samples in direct, CTT, modified tension, splitting and ring tests using both of the experimental tests and numerical simulation (particle flow code 2D). It determined that which one of indirect tensile strength is close to direct tensile strength. Initially calibration of PFC was undertaken with respect to the data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, validation of the simulated models in four introduced tests was also cross checked with the results from experimental tests. By using numerical testing, the failure process was visually observed and failure patterns were watched to be reasonable in accordance with experimental results. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Tensile strength of concrete in direct test was less than other tests results. Tensile strength resulted from modified tension test was close to direct test results. So modified tension test can be a proper test for determination of tensile strength of concrete in absence of direct test. Other advantages shown by modified tension tests are: (1) sample preparation is easy and (2) the use of a simple conventional compression press controlled by displacement compared with complicate device in other tests.