• 한국공작기계학회논문집
• /
• 제14권6호
• /
• pp.45-51
• /
• 2005

Braking performance of a vehicle can be significantly affected by the temperature increment in the brake system. Therefore, the important problem in brake system is to reduce the thermal effect by friction heat. Recently, many studies have been performed and good results have been reported on the prediction of the brake disk temperature. However, the study on the pad, piston and brake fluid temperature is rarely found despite of its importance. In this study, the temperature distribution of the disc brake system is studied according to the material properties of brake piston. Vehicle deceleration, weight distribution by deceleration, disc-pad heat division and the cooling of brake components are considered in the analysis of heat transfer. Unsteady state temperature distributions are analyzed by using the finite element method and the numerical results are compared with the experimental data.

• International Journal of Railway
• /
• 제8권1호
• /
• pp.30-34
• /
• 2015

The Maglev(UTM-02) project is leading by Korea Institute of Machinery & Materials and financially supported from the ministry of Commerce, Industry and Energy. The early development stagy of Maglev(UTM-02) was adopted the general urban railway pneumatic brake system due to the Korea domestic industrial environment. Currently there is two commercial operation Light Railway Train(LRT) system in Korea. One is U-Line in Uijungbu, and the other is Everline in Yongin. Both LRT systems are adopting high performance light weight hydraulic brake system. But those design and manufacturing core technology of the brake system is came from a major brake system companies located from aboard. Currently various studies have been continued to increase practical application and to improve competitiveness on performance for each sub-system of Maglev. Also in case of brake system, developing competitive hydraulic brake system is required. In this study, we have introduced the development process and performance evaluation of the new hydraulic brake system of Maglev.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.261-264
• /
• 1997

A contactless eddy current type braking system is developed to take advantages of the recent brake system which uses hydraulic force can show high efficiency in a certain velocity region, but not in a high velocity region, and has initial response delay time and pressure build-up time which make stopping distance longer. These are the limits of mechanical brake system of a contact type, which makes a concept brake system required. So, in this paper, the contactless brake system .of a inductive current type is chosen instead of hydraulic brake system. This brake system can be used almost forever for being no wear and contributed to lightening weight of a vehicle. Besides, the contactless brake system can be used as that of electric or solar car with anti-lock brake system. The analysis of induced electromotive force and braking torque obtained with theoretical approximate model, the design of a braking system and a nonlinear controller, and the results of simulation of the ABS, experiment are included.

• 한국군사과학기술학회지
• /
• 제5권4호
• /
• pp.9-18
• /
• 2002

In this paper, we have studied the characteristics of a perforated muzzle brake. The main purpose of a muzzle brake is to reduce the momentum being applied to the recoil system. Muzzle brake redirect a portion of the exiting gases to the side exerting a forward force on the brake, thus reducing recoil. So it also reduces the recoil force which acts on the turret and vehicle. First of all, we analyzed the flow-field characteristics of muzzle brake using RAMPANT software. Then we investigated the influence of design parameters of perforated muzzle brake. Sixteen muzzle brakes were tested and evaluated for analyzing their influence on the muzzle brake efficiency. The muzzle brakes were designed to fit on a 40mm gun barrel. The strong dependent parameters of muzzle brake efficiency were the wall thickness(L/d ratio) and the area ratio AR. We designed the perforated muzzle brakes which have 10-20% efficiency. And we proposed a design method of perforated muzzle brake.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.216-222
• /
• 2002

Brake Moan is a laud and strong noise occurring at any vehicle speed over 2 mph as a low frequency in below 600Hz. In this study, we targeted to shift the unstable mode that causes the brake moan from the moats frequency range to sufficiently higher frequency range to avoid the moan phenomenon. We simulated the finite element model and found out the nodes in which the brake moan occurs the most and we regarded the boundary and its relationship between the brake pad and the rotor as a spring coefficient k. With the binary set of the spring coefficient k, we finally used genetic algorithm (GA) to get the optimal topology of the brake pad and its shape to avoid the brake moan. The final result remarkably shows that genetic algorithm can be used in topology optimization procedures requiring complex eigenvalue problems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.125-130
• /
• 2001

It is vary importance that stopping distance for the freight train and need to design parameter of the brake force and friction coefficient. Acoording to the brake force between shoe and wheel less than the adhesion between wheel and rail. Because of vary difference between empty and weight car of 0∼500kN, this solution was made to application for variable loaded brake system. When the V=110km/h. the emergency stopping distance of freight train is about 700m, so this study was considered on the two condition, one of the increse brake force and to be different of the increse friction coefficient on the brake shoe. It was useful increse friction coefficient. Result of study, analyze effect of the brake shoe on the brake force of the freight car and high friction coefficient were proposed. To do this, ${\mu}$=0.155${\pm}$10% when S=600m on the V=110km/h of the train, 2 groove of friction surface on the temperature distribution were considered.

• 제어로봇시스템학회논문지
• /
• 제8권1호
• /
• pp.46-53
• /
• 2002

The brake system of a high speed train has a crucial role for the safety of the train. To develop a safe brake system of the high speed train, it is necessary to understand the braking principle and phenomena of the total brake system and its subsystems. In this paper, we have suggested a mathematical model which includes car dynamics, interactions between cars, adhesive forces, brake blending algorithm, and the dynamics of each brake devices. Also, we have proposed a ready-time compensation algorithm of eddy-current brake system and a brake control logic on electric-pneumatic blending. A simulation study has shown the proposed models and algorithms are effective on the braking of the train.

• 센서학회지
• /
• 제13권3호
• /
• pp.244-251
• /
• 2004

In general, the braking system of high speed train has an important role for the safety of the train. To stop safely the train at its pre-decided position, it is necessary to combine properly the various brakes. Korean high speed train (HSR 350x) has adopted a combined electric and mechanic (friction) braking system. Electric brakes are consist of rheostatic brake, regenerative brake and eddy current brake and mechanical brakes are composed of disc brake, wheel disc brake and tread brake. In this paper, the measuring method that can take a measurement of the braking forces for disc brake and wheel disc brake has been suggested and we have verified that this method is valid through on-line test of HSR 350x.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.897-902
• /
• 2004

The hydraulic brake system is recently apply to the AGT system such merit as installation is convenient and brake force is stronger than pneumatic brake system. The hydraulic brake system consist of brake operating unit, electronic control unit, air compressor and pneumatic/hydraulic tranducer. The components of it are controlled and designed to perform the function of brake system. Therefore, This paper design and the hydraulic brake system and propose the derection of development for Urban Transit System.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.344-346
• /
• 2002

The pneumatic/nydraulic brake system is recently apply to the AGT system such merit as installation is convenient and brake force is strong or than pneumatic brake system. The pneumatic/ hydraulic brake system consist of brake operating unit, electronic control unit, air compressor and pneumatic/hydraulic tranducer. The components of it are controlled and designed to perform the function of brake system. Therefore, This paper design and the pnuematic/hydraulic brake system and propose the derection of development for AGT system.