• 콘크리트학회지
• /
• 제7권6호
• /
• pp.167-175
• /
• 1995

본 연구에서는 매스콘크리트 양생시 수화열에 의한 온도 상승을 예측할 수 있는 온도해석 프로그램 $\boxDr$TAMCON$\boxUl$을 개발하였다. 수치해석 방법으로는 복잡한 형태를 지니고 다양한 경계조건을 만족시켜야 하는 구조물에 대한 온도해석을 용이하게 하기 위하여 유한요소법이 채택되었다. $\boxDr$TAMCON$\boxUl$의 타당성을 검증하기 위하여 벽상구조물과 기초매트에 대하여 이미 문헌에 보고된 수치해석 및 실험치를 본 연구의 해석 결과와 비교한 바 이들이 서로 잘 일치하고 있음을 확인하였다. $\boxDr$TAMCON$\boxUl$은 콘크리트 구조물의 온도균열 방지를 위한 온도제어 및 필요한 양생방법의 도입을 위한 시공관리에 효과적으로 활용될 수 있다.

• Smart Structures and Systems
• /
• 제32권6호
• /
• pp.371-382
• /
• 2023

Box girder bridges are now widely used in bridge construction, and it is necessary to perform load rating regularly to evaluate the load capacity of box girder bridges. Load testing is a common measure for load rating. However, the bridge must be loaded by many trucks under different loading conditions, which is time-consuming and laborious. To solve this problem, this paper proposes a load rating method for box girder bridges based on rapid moving loads testing. The method includes three steps. First, the quasi-influence factors of the bridge are obtained by crossing the bridge with rapidly moving loads, and the structural modal parameters are simultaneously obtained from the dynamic data to supplement. Second, an objective function is constructed, consisting of the quasi-influence factors at several measurement points and structural modal parameters. The finite element model for load rating is then updated based on the Rosenbrock method. Third, on this basis, a load rating method is proposed using the updated model. The load rating method proposed in this paper can considerably reduce the time duration of traditional static load testing and effectively utilize the dynamic and static properties of box girder bridges to obtain an accurate finite element model. The load capacity obtained based on the updated model can avoid the inconsistency of the evaluation results for the different structural members using the adjustment factors specified in codes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.163-168
• /
• 1991

최근 도시지역에서의 교량가설시 P.C BOX GR. 교량이 차지하는 비율이 점차 증가하면서 도심교통난 유발을 최소화 할 수 있는 가설공법에 대한 필요성이 증대되고 있는 상황에서 Precast Element를 이용하여 P.C BOX GR.의 Cantilever 길이를 길게하여 MAIN BOX GR.의 폭을 감소시켜 광폭(B=20M이상)의 상부구조물 일지라도 하부구조를 일주식 교각으로 설치가능할 뿐만 아니라 MAIN BOX GR. 가설시 어떤 가설공법도 적용가능하므로 현장여건에 가장 적합한 가설공법을 용이하게 P.C BOX GR. 공법을 소개하고자 한다.

• Steel and Composite Structures
• /
• 제26권2호
• /
• pp.183-196
• /
• 2018

The traditional prestressed concrete composite box-girders with corrugated steel webs have several drawbacks such as large deflection and potential local buckling. In this study, two methods were investigated to optimize and improve the prestressed concrete composite box-girders with corrugated steel webs. The first method was to replace the concrete bottom slab with a steel plate and the second method was to support the concrete bottom slab on the steel flanges. The behavior of the prestressed concrete composite box-girders with corrugated steel webs with either method was studied by experiments on three specimens. The test results showed that behavior of the optimized and upgraded prestressed concrete composite box-girders with corrugated steel webs, including ultimate bearing capacity, flexural stiffness, and crack resistance, is greatly improved. In addition, the influence of different shear connectors, including perfobond leisten (PBL) and stud shear connectors, on the behavior of prestressed concrete composite box-girders with corrugated steel webs was studied. The results showed that PBL shear connectors can greatly improve the ultimate bearing capacity, flexural stiffness and crack resistance property of the prestressed concrete composite box-girders with corrugated steel webs. However, for the efficiency of prestressing introduced into the girder, the PBL shear connectors do not perform as well as the stud shear connectors.

• Wind and Structures
• /
• 제35권4호
• /
• pp.243-253
• /
• 2022

The conformal mapping method (CMM) has been broadly exploited in the study of fluid flows over airfoils and other research areas, yet it's hard to find relevant research in bridge engineering. This paper explores the feasibility of CMM in streamlined box girder bridges. Firstly, the mapping function transforming a unit circle to the streamlined box girder was solved by CMM. Subsequently, the potential flow solution of aerostatic pressure on the streamlined box girder was obtained and was compared with numerical simulation results. Finally, the aerostatic pressure attained by CMM was utilized to estimate the aerostatic coefficient and flutter performance of the streamlined box girder. The results indicate that the solution of the aerostatic pressure by CMM on the windward side is satisfactory within a small angle of attack. Considering the windward aerostatic pressure and coefficient of correction, CMM can be employed to estimate the rate of change of the lift and moment coefficients with angle of attack and the influence of the geometric shape of the streamlined box girder on flutter performance.

• 정보보호학회논문지
• /
• 제21권2호
• /
• pp.149-156
• /
• 2011

전력 분석 공격이 소개되면서 다양한 대응법들이 제안되었고 그러한 대응법들 중 블록 암호의 경우, 암/복호화 연산도중 중간 값이 전력 측정에 의해 드러나지 않도록 하는 마스킹 기법이 잘 알려져 있다. 블록 암호의 마스킹 기법은 비선형 연산에 대한 비용이 가장 크며, 따라서 AES, ARIA, SEED의 경우 S-box에 대한 대응법을 효율적으로 설계해야만 한다. 하지만 기존의 AES, ARIA, SEED의 S-box에 대한 대응 방법은 마스킹 S-box 테이블을 사용하는 방법으로 하나의 S-box당 256 bytes의 RAM을 필수적으로 사용한다. 하지만 가용 RAM의 크기가 크지 않은 경량보안 디바이스에 이러한 기존의 대응법은 사용이 부적합하다. 본 논문에서는 이러한 단점을 보완하기 위해 마스킹 S-box 테이블을 사용하지 않는 새로운 대응법을 제안한다. 본 논문에서 제안하는 새로운 대응 기법은 비용이 적은 ROM을 활용, RAM의 사용량을 줄일 뿐 아니라 마스킹 S-box 테이블 생성 시간을 소요하지 않으므로 축소 라운드마스킹 기법 적용 시 고속화도 가능하다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.313-321
• /
• 1999

To design steel box girder bridge, designers have taken the classical load distribution coefficient methods. Due to the rapidly developing computer technique, steel box girder bridge is simply modeled as grillage method for analyzing the girder, or as fully finite element method for more accurate and detailed analysis. Recently, cruciform space frame method is developed for modeling and analyzing it more simply and easily compared with finite element method. So, this study for the examination of upper methods' characteristics loaded unit moment load and analyzed the distortional deflection with shell element method and cruciform space frame method, and for three span three girder steel box bridge, loading DB-24 loads, analyzed it by upper methods and compared the results.

• 대한수학회지
• /
• 제48권5호
• /
• pp.985-999
• /
• 2011

A new filled function method is presented in this paper to solve box-constrained nonlinear integer programming problems. It is shown that for a given non-global local minimizer, a better local minimizer can be obtained by local search starting from an improved initial point which is obtained by locally solving a box-constrained integer programming problem. Several illustrative numerical examples are reported to show the efficiency of the present method.

• Structural Engineering and Mechanics
• /
• 제5권1호
• /
• pp.21-32
• /
• 1997

A new torsional analysis method for multiple cell box based on the Softened Truss Model Theory was developed. This softened truss model unifies shear and torsion to address the problem associated with a torque applied on a box. The model should be very useful for the analysis of a reinforced concrete box under torque, especially for the bridge superstructure with multiple cell box sections.

• Molecules and Cells
• /
• 제20권1호
• /
• pp.35-42
• /
• 2005

A novel combined method for locating box H/ACA small nucleolar RNAs (snoRNAs) is described, together with a software tool. The method adopts both a probabilistic hidden Markov model (HMM) and a minimum free energy (MFE) rule, and filters possible candidate box H/ACA snoRNAs obtained from genomic DNA sequences. With our novel method 12 known box H/ACA snoRNAs, and one strong candidate were identified in 30 nucleolar protein genomic sequences.