• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.598-601
• /
• 2005

Z-correction is new method to be used when measuring pattern registration of photomasks. The method is based on measurement of the plate profile in the Zaxis and takes into account the impact on the registration deviations caused by plate support, contamination as well as the photomask flatness itself. Z-correction further facilitates a more neutral way of judging the overlay properties between individual photomasks within a mask set.

• Journal of Biosystems Engineering
• /
• 제21권2호
• /
• pp.191-197
• /
• 1996

Allowable stacking duration of the corrugated fiberboard boxes being widely used for packaging fruits and vegetables was analyzed by the creep behavior and the cumulative load correction factor for the boxes. The stacking boxes were assumed to be stored at a nearly constant temperature and relative humidity condition. When the stacking duration was short period, the stacking height determined by two methods showed a little difference between them, but almost no difference was shown as the stacking duration was longer. Allowable stacking duration was rapidly decreased with the increase of static load applied on the stacking boxes, and allowable stacking duration of Box A was estimated the longer than that of Box B. A model of allowable stacking duration for the corrugated fiberboard box was developed as a function of the stacking load and the ambient relative humidity.

• 응용통계연구
• /
• 제29권1호
• /
• pp.61-73
• /
• 2016

본 논문에서는 다변량 시계열 모형 진단을 위해 잔차의 자기상관성 유무를 확인하기 위한 와일드 붓스트랩(wild bootstrap) Ljung-Box(LB) 검정통계량을 연구하였다. 일반적으로 LB 검정은 오차가 서로 독립이며 동일한 분포를 따른다는 IID 가정 하에 유도되는 점근적 카이제곱 분포를 이용한다. 한편 금융시계열 자료는 분산에 조건부 이분산성이 존재하기 때문에 오차의 IID 가정을 만족시키지 못하며 이에 따라 점근적 분포를 이용한 LB 검정은 제1종의 오류를 만족시키지 못하게 된다. 이를 극복하기 위해 와일드 붓스트랩을 이용한 LB 검정법을 제안하고 그 성질을 연구하고자 한다. 벡터자기회귀 모형과 벡터오차수정 모형 등의 다양한 다변량 시계열 모형을 이용하여 모의실험을 실시하는 한편, 코스피 200지수와 지수선물 자료를 이용한 실증분석을 통해 와일드 붓스트랩을 이용한 LB 검정법이 조건부 이분산성의 부정적인 영향을 효과적으로 제거할 수 있음을 입증하였다.

• 한국위성정보통신학회논문지
• /
• 제8권1호
• /
• pp.77-82
• /
• 2013

최근 주목을 받고 있는 Particle Filtering은 실제 객체 추적에서 발생하는 비선형, 비 가우시안 분포를 가지는 상태 벡터의 사후확률을 추정하기 위한 Monte Carlo 시뮬레이션에 기반을 둔 추적 방법론이다. 우리는 본 논문에서 Particle Filtering을 이용한 객체 추적성능을 향상시킬 수 있는 두 가지 방법론을 제안한다. 첫 번째는 확률이 가장 낮은 샘플을 이전 프레임의 추정된 상태 벡터로 대치하는 피드백 방법론이고, 두 번째는 객체 확률 분포를 추정된 객체 후보영역에 역투영하여 신뢰구간을 구함으로써 추적 박스의 정확도를 향상시키는 방법이다. 또한, 실험을 통해 구한 추적 샘플의 진화 방정식을 제시하였다. 우리는 다양한 상황이 설정된 실험 데이터 셋을 구성하여 실험을 실시하여 제안한 방법론의 우수성을 입증하였다.

• Wind and Structures
• /
• 제30권1호
• /
• pp.55-67
• /
• 2020

Wind tunnel test is one of the most important means to study the flutter performance of bridges, but there are blockage effects in flutter test due to the size limitation of the wind tunnel. On the other hand, the size of computational domain can be defined by users in the numerical simulation. This paper presents a study on blockage effects of a simplified box girder by computation fluid dynamics (CFD) simulation, the blockage effects on the aerodynamic characteristics and flutter performance of a long-span suspension bridge are studied. The results show that the aerodynamic coefficients and the absolute value of mean pressure coefficient increase with the increase of the blockage ratio. And the aerodynamic coefficients can be corrected by the mean wind speed in the plane of leading edge of model. At each angle of attack, the critical flutter wind speed decreases as the blockage ratio increases, but the difference is that bending-torsion coupled flutter and torsional flutter occur at lower and larger angles of attack respectively. Finally, the correction formula of critical wind speed at 0° angle of attack is given, which can provide reference for wind resistance design of streamlined box girders in practical engineering.

• 한국해양학회지:바다
• /
• 제13권3호
• /
• pp.280-285
• /
• 2008

자유낙하식 시료채취기(Free Fall Grab, FFG)를 이용하여 산출한 망간단괴의 부존밀도는 보정이 필요하다. 그 이유는 FFG로 망간단괴를 채취할 때 해저면에 부존되어 있는 망간단괴의 실제 양 보다 적은 양만이 채취되는 것으로 알려져 있기 때문이다. 지난 1994년과 2002년에 각각 1.29와 1.13의 망간단괴 부존밀도 보정상수가 제시된 바 있으며, 이는 주로 해저면 영상자료의 분석을 통해 이루어 졌다. 이 연구에서는 동일한 정점에서 FFG와 상자형 시료채취기(Box Corer, BC)를 이용하여 회수한 망간단괴의 부존밀도를 비교하여 기존에 제시된 망간단괴 부존밀도 보정상수와 비교하였다. 그 결과 FFG를 이용한 망간단괴의 회수율이 BC에 비하여 낮으며, 그 차이는 약 1.4배로 기존의 보정상수에 비해 훨씬 더 크게 나타났다. 따라서 향후 추가 시료 획득과 해저면 영상분석의 개선을 통해 기존의 망간단괴 부존밀도 보정식을 재산정할 필요성이 제기된다.

• 한국컴퓨터정보학회논문지
• /
• 제22권12호
• /
• pp.63-68
• /
• 2017

In this paper, we propose a bounding box prediction algorithm using multiple probability maps to improve object detection result of object detector. Although the performance of object detectors has been significantly improved, it is still not perfect due to technical problems and lack of learning data. Therefore, we use the result correction method to obtain more accurate object detection results. In the proposed algorithm, the preprocessed bounding box created as a result of object detection by the object detector is clustered in various form, and a conditional probability is given to each cluster to make multiple probability map. Finally, multiple probability map create new bounding box of object using morphological elements. Experiment results show that the newly predicted bounding box reduces the error in ground truth more than 45% on average compared to the previous bounding box.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.525-536
• /
• 2014

In this paper, GUI program for microspeaker system simulation program was developed and verified through closed box, vent box and 6th order bandpass enclosure system. By using the pseudo loudspeaker model concept, TS parameters and rear volume of microspeaker were identified. Their suitabilities were proved by comparing test results with simulations of electrical impedance and sound pressure response curves for the three box types; closed box, vent box and 6th order bandpass box. Also, MSSP was found to be effective regardless of the microspeaker's shape, either circular or rectangular shape. MSSP can be used for the microspeaker system simulation, and can give a general prediction of such as; sound pressure level curve, electrical impedance, diaphragm velocity and displacement curve according to multiple design parameters; diaphragm mass, compliance, force factor, front and rear volume, front and rear port's diameter and length.

• Wind and Structures
• /
• 제35권4호
• /
• pp.243-253
• /
• 2022

The conformal mapping method (CMM) has been broadly exploited in the study of fluid flows over airfoils and other research areas, yet it's hard to find relevant research in bridge engineering. This paper explores the feasibility of CMM in streamlined box girder bridges. Firstly, the mapping function transforming a unit circle to the streamlined box girder was solved by CMM. Subsequently, the potential flow solution of aerostatic pressure on the streamlined box girder was obtained and was compared with numerical simulation results. Finally, the aerostatic pressure attained by CMM was utilized to estimate the aerostatic coefficient and flutter performance of the streamlined box girder. The results indicate that the solution of the aerostatic pressure by CMM on the windward side is satisfactory within a small angle of attack. Considering the windward aerostatic pressure and coefficient of correction, CMM can be employed to estimate the rate of change of the lift and moment coefficients with angle of attack and the influence of the geometric shape of the streamlined box girder on flutter performance.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.23-29
• /
• 2007

In Korea, the number of LPG vehicles is increasing continuously because LPG is cheaper than Gasoline. Also in Europe, the CNG fuel is a good solution to meet $CO_2$ regulation. In order to use LPG/CNG fuel, new EMS ECU must be developed for every type of vehicles and it requires huge development cost. In order to reduce development cost and time, SIEMENS VDO has developed an Interface Box. It supports EMS ECU in the car and manages LPG/CNG fuel injection system. Basically the Interface box can be used with any kind of EMS ECU. The Interface Box controls LPG/CNG injector through the injection command of gasoline EMS ECU. It calculates required amount of based on the fuel temperature and pressure and sends feedback signal to ECU for fuel correction. Also, it controls LPG/CNG specific actuator such a Shut off valves and LPG switch inputs.