• Advances in concrete construction
• /
• v.9 no.6
• /
• pp.557-568
• /
• 2020

In this study, the impact of ring supports around the shell circumferential has been examined for their various positions along the shell axial length using Rayleigh-Ritz formulation. These shells are stiffened by rings in the tangential direction. For isotropic materials, the physical properties are same everywhere where the laminated and functionally graded materials, they vary from point to point. Here the shell material has been taken as functionally graded material. The influence of the ring supports is investigated at various positions. These variations have been plotted against the locations of ring supports for three values of length-to-diameter ratios. Effect of ring supports with middle layer thickness is presented using the Rayleigh-Ritz procedure with three different conditions. The influence of the positions of ring supports for clamped-clamped is more visible than simply supported and clamped-free end conditions. The frequency first increases and gain maximum value in the midway of the shell length and then lowers down. The Lagrangian functional is created by adding the energy expressions for the shell and rings. The axial modal deformations are approximated by making use of the beam functions. The comparisons of frequencies have been made for efficiency and robustness for the present numerical procedure. Throughout the computation, it is observed that the frequency behavior for the boundary conditions follow as; clamped-clamped, simply supported-simply supported frequency curves are higher than that of clamped-simply curves. To generate the fundamental natural frequencies and for better accuracy and effectiveness, the computer software MATLAB is used.

• The Journal of the Korean life insurance medical association
• /
• v.3 no.1
• /
• pp.233-244
• /
• 1986

We'd experienced a case of primary hepatoma at medical department, Dae han Kyoyuk Ins. Company January 1985. As it was found very early stage, we made out the case long term-survival possibility unexpectedly. The conclusions we gained, making comparative-analysis of ultrasonic view and operation's view are as follows; 1. By ultrasonography, echogenicity of tumor was increased type as compared with liver parenchyme. 2. The margin of the primary hepatoma by ultrasonography encapsulated well and the extraction after operation was same. 3. The boundary of tumor was clear. 4. The space-occupying lesion in liver was solitary. 5. The affected site was left lobe of the liver. 6. We couldn't discover a little fluid echo in upper abdomen on the ultrasonography, but could see in the cul-de-sac area and it accorded with the gross finding during laparotomy. 7. The case was cholangiocarcinoma in view of pathologic histology. 8. After the operation of lobectomy. the prognosis which was passed a months was very satisfactory and she exists until present.

• Journal of Korean Society for Quality Management
• /
• v.44 no.4
• /
• pp.935-949
• /
• 2016

Purpose: This study attempts to find out the optimum condition of the rotary cutter making pellet in the footwear outsole process. The pellets are used in the process of outsole rubber fabrication to reduce cycle time and save raw material. Methods: Computer simulations are used to analyze the maximum stress in the rotary cutter after designing a variety of cutter shapes. Taguchi method is used to identify the robust condition of the cutter. In $L_{18}$ orthogonal array, the control factors such as knife width, twisted angle, number of knives, diameter, knife depth and supported angle are considered and noise factors like assembly tolerance and amount of antifriction are allocated. Results: It is found that the most important factors to reduce maximum stress in the cutter are supported angle and diameter. Using Tacuchi's results, we can reduce 70% cycle time and 9% raw material compared to the traditional method using cutting die. Conclusion: When designing the rotary cutter, the best conditions are the diameter at its maximum allowable value and supported angle in the boundary of machine inner space.

• Tunnel and Underground Space
• /
• v.14 no.3
• /
• pp.229-240
• /
• 2004

Coastal aquifers may serve as major sources fur freshwater. In many coastal aquifers, intrusion of seawater has become one of the major constraints imposed on groundwater utilization. The management of groundwater in coastal acquifers means making decision as to the pumping rate and the spatial distribution of wells. Several numerical techniques for flow and solute transport simulation can provide the means to achieve this goal. As a basic study to predict the intrusion of seawater in coastal phreatic aquifers, the coupled flow and solute transport analysis was conducted by use of the 3-D finite element code, SWICHA. In order to understand how the location and the shape of freshwater-seawater transition zone were affected by the boundary conditions and hydrogeologic variables, parametric study was carried out.

• Journal of Environmental Impact Assessment
• /
• v.14 no.5
• /
• pp.317-335
• /
• 2005

This paper is primarily intended to propose a new concept of "aggregate control of road density" which is defined as the area-wide road surface per watershed area. An empirical study for experimental sites was conducted to confirm how a standard GIS technology can be used to assist in estimating the road density in terms of total volume threshold control. Guidelines for a replicable methodology are presented to provide a strong theoretical basis for the standardization of factors involved in the estimation of the road space threshold; the meaningful classification of road types, delination of watershed boundary, interpretation for distribution trends of road density etc. A variety of visual maps using overlay analysis can be generated over large areas quickly and easily to show the fact that some degree of road space already exists in the experimental sites. They could be used as an evidence to limit further construction of road network in comparison with other tributary watershed. It is anticipated that this research output could be used as a valuable reference to confirm the potential of introducing the new concept of "site specific road density" to support more scientific and objective decision-making in the process of road construction project.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.11-22
• /
• 2014

It is usual to determine silver-town location by people's experienced knowledge or intuition considering many different type of thematic variables simultaneously. This paper is primarily intended to locate sunny silver-town according to catchment-wide solar radiation as single key variable. GIS based solar simulation realistically identified catchment-wide solar radiation in the study area using large scale spatial precision. More than 90% over the worst catchment were identified shadow surfaces while the optimal catchment was heavily covered by sunny radiation surfaces. It is confirmed that standard GIS technology can offers the viable method of measuring and comparing the catchment-wide solar radiation. Guidelines for a replicable methodology are presented to provide a strong theoretical basis for the standardization of factors involved in locating the sunny silver-town; delineation of catchment boundary, solar simulation, catchment-wide comparison etc. They could be used as an evidence to determine sunny catchment in comparison with other catchment, based solar simulation. It is anticipated that this research output could be used as a valuable reference to confirm the potential of introducing the new concept of "catchment specific solar radiation" to support more scientific and objective decision-making in the process of locating silver town.

• The Journal of Natural Sciences
• /
• v.19 no.1
• /
• pp.77-94
• /
• 2008

The purpose of this study is to present a design proposal of the senior housing in the city of Kimje and design guidelines for making outdoor spaces for Korean elderly. To do this, this study examined previous research papers and scholastic writings, related to elderly housing, and analyzed study cases of elderly housing. As a result, design guidelines of outdoor spaces for elderly were classified 5 types. Entrance area of housing complex is subdivided into the condition of location, the entrance of housing complex, an access road, and a direction mark. Building entrance area is subdivided into an access and waiting area, a canopy facility, and the pattern and color of boundary. In & outdoor neutral area is subdivided into a spatial standard, a patio, and a terrace. Parking lots is subdivided into a spatial standard and an entrance access. Outdoor living area is subdivided into a spatial and social standard, the usage of movable chairs, a garden, a pocket park, a lawn area, a sports area, an active and passive sports area, a promenade, a lookout area and so on. In these study cases, outdoor living area is commonly located into a community space, a nature friendly space, a health & sports space, and an outlook space and it plays positive role to the elderly. However, versatile outdoor spaces such as horticultural therapy garden is needed, which can be able to stimulate the physical senses of the elderly. This proposal is meant to create new outdoor spaces of a senior housing and to enhance the way of life of elderly.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.303-306
• /
• 2007

After Kyoto protocol took effect, many countries are making efforts to reduce $CO_2$ one of effective which is geosequestration. But a percentage of geosequestration in total research budget is very small and the priority order of research also is receded in Korea. As one of efforts to activate the research on geosequestration in field of geophysics, we proposed the plan to build up a measurement system for rock physical properties monitoring during $CO_2$ injection which will function as original technology. The system consists of two part, one of which is a data acquisition system based on seismic and complex resistivity tomographic measurement and the other of which is a tri-axial compressive system to realize the in-situ condition. And also developments of various inversion algorithms are proposed to interpret data qualitatively such as a inversion algorithm for confined cylindrical boundary, a joint inversion algorithm and a 4-D inversion algorithm.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.627-636
• /
• 2007

The present work is aimed at further discussing the effectiveness of dimensionless parameters recently proposed for the analysis of flow stability in heated channels with supercritical fluids. In this purpose, after presenting the main motivations for the introduction of these parameters in place of previously proposed ones, additional information on the theoretical bases and on the consequences of this development is provided. Stability maps, generated by an in-house program adapted from a previous application to boiling channels, are also shown for different combinations of the operating parameters. The maps are obtained as contour plots of an amplification parameter obtained from numerical discretization and subsequent linearization of governing equations; as such, they provide a quantitatively clear perspective of the effect of different boundary conditions on the stability of heated channels with supercritical fluids. In order to assess the validity of the assumptions at the basis of the in-house model, supporting calculations have been performed making use of the RELAP5/MOD3.3 computer code, detecting the values of the dimensionless parameters at the threshold for the occurrence of instability for a heated channel representative of SCWR proposed core configurations. The obtained results show reasonable agreement with the maps, supporting the applicability of the proposed scaling parameters for describing the dynamic behaviour of heated channels with supercritical fluids.

• Journal of Korea Game Society
• /
• v.11 no.6
• /
• pp.13-22
• /
• 2011

In the digital media environment, the convergence is in the progress creating the new service and contents by users and developing the new needs of users by the service and contents as well. Social games are actualizing the new meaning of convergence. shows not only a new situation blurring the boundary of work and leisure, labor and playing and private and public sector, but how meaningful it is to make connection of social interactions and social assets a solid network. As the most popular social game text, reveals how the personal connections and personal networks constructs the social capital by making the ritual communication more interesting and flexible to the social gamers.