• Advances in aircraft and spacecraft science
• /
• 제5권1호
• /
• pp.21-49
• /
• 2018

In this paper, geometric nonlinear bending characteristics of single wall carbon nanotube reinforced composite (SWCNTRC) doubly curved shell panels subjected to uniform transversely loadings are investigated. The nonlinear mathematical model is developed for doubly curved SWCNTRC shell panel on the basis of higher-order shear deformation theory and Green- Lagrange nonlinearity. All nonlinear higher order terms are included in the mathematical model. The effective material properties of SWCNTRC are estimated by using Eshelby-Mori-Tanaka micromechanical approach. The governing equation of the shell panel is obtained using the total potential energy principle and a Newton-Raphson iterative method is employed to compute the nonlinear displacement and stresses. The present results are compared with published literature. The effect of SWCNT volume fraction, width-to-thickness ratio, radius-to-width ratio (R/a), boundary condition, linear and nonlinear deflection, stresses and different types of shell geometry on nonlinear bending response is investigated.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.895-902
• /
• 1999

This paper deals with a numerical study of the tribological contact stress distributions of elastomeric lip seals for oscillating shafts when the sealing interference and band width between the lip ease or contact seals and the shaft are present. Using the finite element method the contact stress and band width of scraper seals are analyzed for the sealing interference including some nonlinearities such as geometrical nonlinearity, material nonlinearity and nonlinear contact boundary condition. The FEM results showed that the contact stress concentrated on the contacting lip zone between the contacting edge of lip and the shaft for the increased interference. In double lip scraper seals, ole maximum contact stress of the dust lip, which is used to exclude foreign contaminants is six times higher than that of the primary sealing lip, which is used to contain lubricants.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.198-203
• /
• 1997

This paper deals with a numerical study of the tribological contact stress distributions of elastomeric lip seah for oscillating shafts when the sealing interference and band width between the lip edge of contact seals the shaft are present. Using the finite element method, the contact stress and band width of scraper seals rare analyzed for the sealing interference including some nonlinearities such as geometrical nonlinearity, material nonlinearity and nonlinear contact boundary condition. The FEM results showed that the contact stress concentrated on the contacting lip zone between the contacting edge of lip and the shaft for the increased interference. In double lip scraper seals, the maximum contact stress of the dust lip, which is used to exclude foreign contaminants, is six times higher than that of the primary sealing lip, which is used to contain lubricants.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1559-1566
• /
• 1994

Using the finite element method, the contact force, contact band width and temperature distribution of lip seals analyzed for the interference including some nonlinearities such as material nonlinearity, geometrical nonlinearity and nonlinear contact boundary condition. The calculated results showed that the contact stress concentrated on the contact zone between the garter spring and the rubber toward the flex side, the contact edge of lip seals. The high contact forces due to the increased interference separate the sealing gap between the lip edge and the rotating shaft. This may lead to leak the sealed oil.

• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.333-347
• /
• 2014

Nonlinear bending of super-elliptical plates of uniform thickness under uniform transverse pressure was investigated by the Ritz method. The material was assumed to be homogeneous and isotropic. The contribution of the boundary conditions at the point supports was introduced by the Lagrange multipliers. The solution was obtained by the Newton-Raphson method. The influence of the location of the point supports on the central deflection was highlighted by sensitivity analysis. An approximate relationship between the central deflection and the super-elliptical power was obtained using the method of least squares. The critical points where the maximum deflection may develop, and the influence of nonlinearity were highlighted. The nonlinearity was found to be sensitive to the aspect ratio. The accuracy of the algorithm was validated by comparing the central deflection with the solutions of elliptical and rectangular plates.

• 대한수학회보
• /
• 제33권4호
• /
• pp.503-512
• /
• 1996

In this paper we investigate a relation between the multiplicity of solutions and source terms in a nonlinear suspension bridge equation in the interval $(-\frac{2}{\pi}, \frac{2}{\pi})$, under Dirichlet boundary condition $$ (0.1) u_{tt} + u_{xxxx} + bu^+ = f(x) in (-\frac{2}{\pi}, \frac{2}{\pi}) \times R, $$ $$ (0.2) u(\pm\frac{2}{\pi}, t) = u_{xx}(\pm\frac{2}{\pi}, t) = 0, $$ $$ (0.3) u is \pi - periodic in t and even in x and t, $$ where the nonlinearity - $(bu^+)$ crosses an eigenvalue $\lambda_{10}$. This equation represents a bending beam supported by cables under a load f. The constant b represents the restoring force if the cables stretch. The nonlinearity $u^+$ models the fact that cables expansion but do not resist compression.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.113-119
• /
• 2005

A crack emanating from an internal electrode or a conducting damage path in ferroelectric ceramic actuators is analyzed. The boundary of the domain switching zone near the edge of the internal electrode in a ceramic multilayer actuator is determined based on the nonlinear electric theory. The stress intensity factor induced by a ferroelectric domain switching under small scale conditions is numerically obtained for flaws of various sizes near the electrode edge. It is found that stress intensity factor near the crack tip depends on the material property of the electrical nonlinearity.

• Structural Engineering and Mechanics
• /
• 제43권2호
• /
• pp.211-223
• /
• 2012

This paper deals with large deformation post-buckling of a linear-elastic and hygrothermal beam with axially nonmovable pinned-pinned ends and subjected to a significant increase in swelling by an alternative method. Analytical approximate solutions for the geometrically nonlinear problem are presented. The solution for the limiting case of a string is also obtained. By coupling of the well-known Maclaurin series expansion and orthogonal Chebyshev polynomials, the governing differential equation with sinusoidal nonlinearity can be reduced to form a cubic-nonlinear equation, and supplementary condition with cosinoidal nonlinearity can also be simplified to be a polynomial integral equation. Analytical approximations to the resulting boundary condition problem are established by combining the Newton's method with the method of harmonic balance. Two approximate formulae for load along axis, potential strain for free hygrothermal expansion and periodic solution are established for small as well as large angle of rotation at the end of the beam. Illustrative examples are selected and compared to "reference" solution obtained by the shooting method to substantiate the accuracy and correctness of the approximate analytical approach.

• 한국실내디자인학회논문집
• /
• 제27권2호
• /
• pp.45-54
• /
• 2018

Immersive space is a new type of space, which is converged with other domains and expressed in various ways and here, a mutual exchange between space and participants is realized with active intervention of participants. The purpose of this study is to examine boundary changes and characteristics in virtual space and reality or inside and outside, focusing on immersive space. For this study, a case analysis was conducted, based on the key words regarding flow experience and boundary characteristics in immersive space. The boundary characteristics extracted are as follow. First, while immersive space is overlapped in many different ways, the boundary in space gradually changes and one unique and convergent space is formed. Also, a combination of overlap is made with internal and external physical force and a convergent boundary is created. Second, forms are mixed in diverse ways and an unrealistic boundary space is revealed. For new experience, it has familiar, but new experiential characteristics and also shows an expanded boundary by the medium of different domains. Third, a simultaneous space, based on variability of time and space, has an ambiguous boundary due to a meaningless physical boundary of space and changing into a space region constantly, it becomes an unlimited variable space. Fourth, a linear expansion-based emergent space has nonlinearity, which creates a meaningless boundary, recognized as an irregular, dynamic and transformative space and expands to a creative space. In conclusion, it is anticipated that based on diverse characteristics found in immersive space, this study would give unlimited inspiration to many design fields and art creation activities and contribute to a further development through continued research on immersive space.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1811-1820
• /
• 2010

실제 대부분의 공학 문제들은 크고 작은 비선형성을 내포한다. 구조물의 최적설계 과정에서는 다수의 구조물 사이에 발생하는 접촉이나 비선형 물성치를 가지는 재료, 또는 대변형을 고려해야만 한다. 그러나 민감도 계산이 고가이기 때문에 비선형성을 최적화에 고려하는 것은 매우 어렵다. 따라서 비선형 정적 반응 위상최적설계를 위하여 등가하중법을 사용한다. 등가하중이란 비선형 해석에서 유발되는 반응장과 동일한 반응장을 유발하는 선형 정적하중이다. 등가하중법은 치수/형상최적설계를 위하여 연구되어 왔다. 위상최적설계는 치수/형상최적설계에 비하여 설계변수가 많기 때문에 기존의 등가하중법을 그대로 적용할 수 없기 때문에 위상최적설계를 위하여 등가하중법을 확장하고 수정한다. 간단한 예제를 통하여 등가하중법을 이용한 위상최적설계 결과가 수치적으로 도출한 결과와 유사함을 보이고 실제 공학 예제의 위상최적설계를 통하여 기존의 선형 정적 위상최적설계와 결과를 비교한다.