• 대한지리학회지
• /
• 제49권3호
• /
• pp.423-437
• /
• 2014

구획화는 인간 활동에 영향을 미치는 새로운 지역적 틀을 만들어내는 공간 의사결정 과정이다. 그러나 구역 내 포함되어 있는 자연적 장애물은 재조직화된 구역 내에서 이루어지는 인간 활동의 효율성을 떨어뜨릴 수 있다. 이는 구획화 과정에서 경계의 특성, 즉 고도와 같은 자연적 특성, 상호작용과 같은 관계적 특성을 고려할 필요가 있음을 의미한다. 본 연구의 목적은 이러한 경계 특성을 반영하는 새로운 구획모델을 고안하는 것이다. 경계를 '결합' 혹은 '분리'와 같이 이분법적으로 간주하기 보다는 인접한 두 공간 단위 사이의 길이, 고도 편차, 상호작용과 같은 여러 경계 특성을 바탕으로 평가된 결합의 가능성을 나타내는 연속적 함수로 간주하고 목적함수 형태로 모델에 반영한다. 모델은 인구, 면적과 같은 수요 균형을 부여하는 제약조건뿐만 아니라 명시적인 연접성 제약조건을 갖는다. 경계 속성을 자연적 특성과 관계적 특성으로 구분하고, 이와 관련된 다양한 요인들에 대하여 적합도 분석을 수행하여 인접한 두 기본 공간 단위 사이의 결합 가능성을 평가한다. 행정구역 재설정문제에 고안된 모델 및 경계 특성 분석 방법을 적용한다. 분석 결과는 혼합정수계획법의 틀로 다양한 경계 특성을 고려한 구획화가 가능함을 보여준다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.199-201
• /
• 2011

NACA0012 Airfoil was simulated with Computational Fluid Dynamics(CFD) and the aerodynamic characteristics was analyzed for various far-field boundary distances ranging from 10 airfoil chord to 50 chord Drag coefficient distribution was dependent on the far-field distance and circulation, integrated along the loop inside the flow region, was also dependent. It was turned out that some corrections based on the circulation should be added to the far-field boundary condition for accurate airfoil simulation.

• 대한기계학회논문집B
• /
• 제21권6호
• /
• pp.779-792
• /
• 1997

Flow characteristics are numerically investigated when a packet of waves consisting of a Tollmien-Schlichting wave and a pair of Squire waves evolves in a flat-plate laminar boundary layer using a large eddy simulation with a dynamic subgrid-scale model. Characteristics of early stage transitional boundary layer flow such as the .LAMBDA. vortex, variation of the skin friction and backscatter are predicted. Smagorinsky constants and the eddy viscosity obtained from the dynamic subgrid-scale model significantly change as the flow evolves. Far Field noise radiated from the transitional boundary layer shows the dipole and quadrupole characteristics owing to the wall shear stress and the Reynolds stresses, respectively.

• Structural Engineering and Mechanics
• /
• 제86권6호
• /
• pp.751-764
• /
• 2023

In practical engineering such as aerial refueling pipes, the boundary of the fluid-conveying pipe is difficult to be completely immovable. Pipes under movable and immovable boundaries are controlled by different dominant nonlinear factors, where the boundary mobility will affect the nonlinear dynamic characteristics, which should be focused on for adopting different strategies for vibration suppression and control. The nonlinear dynamic instability characteristics of functionally graded fluid-conveying pipes lying on a viscoelastic foundation under movable and immovable boundary conditions are systematically studied for the first time. Nonlinear factors involving nonlinear inertia and nonlinear curvature for pipes with a movable boundary as well as tensile hardening and nonlinear curvature for pipes with an immovable boundary are comprehensively considered during the derivation of the governing equations of the principal parametric resonance. The stability boundary and amplitude-frequency bifurcation diagrams are obtained by employing the two-step perturbation- incremental harmonic balance method (TSP-IHBM). Results show that the movability of the boundary of the pipe has a great influence on the vibration amplitude, bifurcation topology, and the physical meanings of the stability boundary due to different dominant nonlinear factors. This research has guidance significance for nonlinear dynamic design of fluid-conveying pipe with avoiding in the instability regions.

• 한국전산유체공학회지
• /
• 제10권3호
• /
• pp.19-26
• /
• 2005

The purpose of this paper is the study on the characteristics of an inlet system with shock/boundary layer interactions by using various types of bumps which are substituted for the conventional bleeding system in supersonic inlet. in this study a comprehensive numerical analysis has been performed to understand the three-dimensional flow field including shock/boundary layer interaction and growth of turbulent boundary layer that might occur around a three-dimensional bump in a supersonic inlet. The characteristics of boundary layer seen in the current numerical simulations indicate the potential capability of a three-dimensional bump to control shock/boundary layer interaction in supersonic inlets.

• Architectural research
• /
• 제15권1호
• /
• pp.43-52
• /
• 2013

The reinforced concrete shear walls are being widely used in the domestic high-rise residential complex buildings. If designed by current codes, the special boundary element is needed in almost all high-rise shear wall buildings. This is because the equation for determining the provision of the special boundary element in the current codes cannot reflect the characteristics of the domestic high-rise shear walls with high axial load ratio and high proportion of elastic displacement to total displacement. In this study, a new equation to be able to reflect the characteristics is proposed. By using the equation, the special boundary element may not be necessary in certain cases so that structural engineers can relieve the burden of installing the special boundary element in every high-rise shear wall.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 춘계 학술대회논문집
• /
• pp.213-218
• /
• 2005

The purpose of this study is the characteristics of an innovative inlet system with shock/boundary layer interactions by using various types of bumps which are substituted for the conventional bleeding system in supersonic inlet. This study performs a comprehensive numerical effort that be directed at better understanding the three-dimensional flowfield includes shock/boundary layer interaction and growth of turbulent boundary layer that occur around a three-dimensional bump in a supersonic inlet. The characteristics of boundary layer seen in the current numerical simulations indicates the potential capability of the three-dimensional bump to control shock/boundary layer interaction in supersonic inlets.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.171-177
• /
• 1999

Many lubricated systems experience boundary lubrication condition during operation. However, the friction and wear characteristics of boundary lubrication are not clearly understood. In this work the factors which affect the friction and wear between boundary lubricated metallic surfaces are investigated. Experiments were performed using a pin-on-disk type tester with pure aluminum, pure copper, and SM45C steel as the disk material and steel, stainless steel and bearing ball as the ball. The experimental conditions were determined according to the Taguchi experimental method. From the experimental results, the major factors that influence the friction and wear characteristics of boundary lubrication could be identified.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 추계학술발표대회 논문집
• /
• pp.176-179
• /
• 2005

'Boundaries' are divided in various types and expressed in diverse ways. Since the progress of socio-cultural, scientific, technological and ideological changes has been so fast, spaces, including cities and their architecture, are also changing rapidly. It is really hard to catch the general flow of modern architectural situations and the logic behind them since they are very complicated and diverse. It is even more complicated to determine which architectural phases represent the same period and how to provide the accompanying characteristics. Therefore, in this study, the boundary has infinite possibilities. By how to provide the accompanying characteristics. Therefore, in this study, the boundary has infinite possibilities. By reorganizing the structure of the ambiguous boundary and what the ambiguous boundary means itself in the process of thinking of creative designers as well as encompassing spatial design. This study will suggest a formative possibility that can be applied as space.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권1호
• /
• pp.187-193
• /
• 2021

In this paper, we propose an image watermarking technique that effectively hides confidential data in the LSB of image pixels by utilizing the characteristics of the image. In the proposed technique, the image is precisely divided into boundary surface and normal region other than the boundary surface and performs different processing. The boundary surface existing in the image is created by meeting different regions and contains important information of the image. One bit of confidential data is concealed in the LSB of the pixel at the boundary surface to preserve the characteristics of the boundary surface. In normal region other than the boundary surface, the pixel values are similar, and the change with the adjacent pixel values is smooth. Based on this property, even if the 2 bits of confidential data are hidden in the lower 2 bits of the pixel in the normal region, the difference cannot be visually distinguished. When confidential data is concealed in an image as described above, the amount of confidential data concealed in an image can be increased while maintaining excellent image quality. Concealing confidential data by applying the proposed method increases the amount of confidential data concealed by up to 84.6% compared to the existing method. The proposed technique can be effectively used for commercial image watermarking that hides copyright information.