• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.30-37
• /
• 2004

Flow characteristics of the inflow ahead of a rotating propeller attached to a container ship model were investigated using a two-frame PIV (Particle Image Velocimetry) technique. Ensemble-averaged mean velocity fields were measured at four different blade phases. The mean velocity fields show the acceleration of inflow due to the rotating propeller and the velocity deficit in the near-wake region. The axial velocity distribution of inflow in the upper plane of propeller is quite different from that in the lower plane due to the thick hull boundary layer. The propeller inflow also shows asymmetric axial velocity distribution in the port and starboard side. As the inflow moves toward the propeller, the effect of phase angle variation of propeller blade on the inflow becomes dominant. In the upper plane above the propeller axis the inflow has very low axial velocity and large turbulent kinetic energy, compared with the lower plane. The boundary layer developed along the bottom surface of stern hull forms a strong shear layer affecting vortex structure of the propeller near-wake.

• 한국수산과학회지
• /
• 제27권2호
• /
• pp.173-182
• /
• 1994

A numerical experiment on the effective discharge of waste materials caused in recirculating aquaculture basins was performed. The numerical model used in this study was a 4-level hydrodynamic and advection-diffusion model. Flow structures and settling processes of ss in the various mathematical model basins are discussed. The calculated flow fields of the numerical basin corresponded well with the measured velocity in field basin. In the cases of steep bottom slopes in 4/30, the non-dimensional tractive force($U{\ast}/U{\ast}_c$) which is all important parameter for the deposition pattern of waste materials was stronger than with the mild slope one. The settling pattern of ss depended considerably on the degree of bottom slope of basin. To concentrate deposited waste materials into the center discharge pipe, it is useful to design a cylindrical basin with a steeply conical bottom. In addition, to prevent movement of the deposit area away from the center, it is necessary to locate the circulating ducts at diametrically opposed points on the basin sides.

• 설비공학논문집
• /
• 제5권4호
• /
• pp.249-256
• /
• 1993

Numerical method is applied to predict the time variation behavior of flammable mixture formation in a two dimensional enclosure from the beginning of gas leak. Additionally experimental method is used to consider qualitative aspects. Characteristics of flammable mixture formation such as distribution of flow and fuel mass fraction at various locations in the enclosure are determined for the following parameters: the various locations of leak at the bottom and aspect ratio of the enclosure. In the case of gas leak with small leak velocity from the bottom of enclosure gravitational force affects the formation of flammable mixture. Aspect ratio of the enclosure also affects the formation of flammable mixture. The volume of the region of recirculating flow is dominant factor affecting the formation mixture.

• 대한기계학회논문집B
• /
• 제25권7호
• /
• pp.877-884
• /
• 2001

A theoretical analysis is conducted on the Stokes flow in a narrow channel. A vertical fin is mounted on the bottom plate and the flow is induced by uniformly sliding top plate. The governing harmonic equation was solved in the transformed ζ-plane, which is obtained by applying conformal mappings to the physical plane. By using well-known transformation technique, closed-form expressions for velocity and skin frictional stress on the top and bottom plates were obtained.

• Fisheries and Aquatic Sciences
• /
• 제1권2호
• /
• pp.168-179
• /
• 1998

Circulation in the Jinhae Bay in the southern sea of Korea is examined using the Princeton Ocean Model (POM) with a free surface in a sigma coordinate, governed by primitive equations. The model well corresponds to the time series of the observed velocities at several layers obtained from a long-term mooring observation. In the residual velocity field of the model, persistent downward flow fields are formed along the central deep regions in the bay, and they are caused by bottom topographic effect. In addition, a comparison between a depth-averaged (2D) model and the POM is given, and a dependance of the results on bottom drag coefficient is also examined.

• Wind and Structures
• /
• 제29권1호
• /
• pp.33-41
• /
• 2019

The interaction of head waves with an infinite row of identical, equally spaced, rectangular breakwaters is investigated in the presence of uneven bottom topography. Using linear water wave theory and matched eigenfunction expansion method, the boundary value problem is transformed into a system of linear algebraic equations which are numerically solved to know the velocity potentials completely. Utilizing this method, reflected and transmitted wave energy are computed for different physical parameters along with the wave field in the vicinity of breakwaters. It is observed that the wave field becomes more complicated when the incoming wavelength becomes smaller than the channel width. A critical ratio of the gap width to the channel width, corresponding to the inflection point of the transmitted energy variation, is identified for which 1/3 of the total energy is transmitted. Similarly, depending on the incident wavelength, there is a critical breakwater width for which a minimum energy is transmitted. Further, the accuracy of the computed results is verified by using the derived energy relation.

• Steel and Composite Structures
• /
• 제3권4호
• /
• pp.289-306
• /
• 2003

A series of tests was conducted to study the behaviour of steel-composite sandwich beams under low velocity hard impact. Damage characteristic and performance of sandwich beams with different spacing of shear connector were evaluated under impact loading. Thin steel plates were used as top and bottom skins of the sandwich beams and plain concrete was used as the core material. Shear connectors were provided by welding of angle sections on steel plates. The sandwich beams were impacted at their midpoint by a hemi-spherical nose shaped projectile dropped from various heights. Strains on steel plates were measured to study the effects of impact velocity or impact momentum on the performance of sandwich beams. Spacing of shear connectors is found to have significant effects on the impact response of the beams.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.3960-3969
• /
• 1996

A fluid flow inside a circular cylinder subject to horizontal and circular oscillation is analyzed theoretically. Under the assumption of small-amplitude oscillation, the governing equations take linear forms. The velocity field is obtained in terms of the first kind of Bessel function of order 1. It was found that a particle describes an orbit close to a circle in the central region and an arc near the side wall. We also obtained the Stokes' drift velocity induced by the traveling wave along the circumferential direction. The Eulerian streaming velocities at the edge of the bottom and side boundary layers were also obtained. It was shown that the vertical component of the steady streaming velocity on the side wall is almost proportional to the amplitude of the free surface motion.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.134-141
• /
• 2008

To evaluate the engineering properties of soil, the laboratory test always is carried out using samples obtained from the field. There are many studies to estimate the effect of sampling disturbance. The objective of this study appraises the disturbance using the shear wave velocity. The new shelby tube which three transducers are installed every 20cm interval is used. To laboratory tests, the large-scale consolidometer (calibration chamber) is used. During 1cm penetration, the shear wave velocity is measured by every transducer. The initial sampling disturbance is assessed through the velocity difference from bottom to right upside transducer. After finishing the sampling, the velocity is still measured every time to assess the soil disturbance in shelby tube itself. Through the measured velocity, the effect of disturbance is appraised. This study suggests that the sampling disturbance of shelby tube is effectively evaluated using shear wave velocity.

• 자원환경지질
• /
• 제40권6호
• /
• pp.739-749
• /
• 2007

탄성파 속도는 지층 물성에 따라 다양하게 분포한다. 탄성파 음원 모음도 상에 나타나는 이러한 특성은 균질 매질을 고려한 수치 모델링에서는 정상적으로 모사할 수 없으므로 무작위 불균질 매질을 고려한 수치 모델링이 필요하다. 본 연구에서는 불균질 매질 모델을 설정하고, 가우스 자기상관 함수, 지수 자기상관 함수, 폰 카르만 자기상관 함수를 이용하여 단순 지층 구조에 적용하고 각각의 특성을 살펴보았으며, 이 가운데 폰 카르만 자기상관 함수가 단파장 불균질 속도매질을 잘 표현함을 알 수 있었다. 가스 하이드레이트 수치모델링은 동해 현장자료를 바탕으로 해저면과 모델크기를 결정하였으며, 수치모델링 결과 폰 카르만 자기 상관함수가 불균질 지층구조를 포함하는 가스 하이드레이트 속도모델에서 산란현상을 가장 적절하게 구현함을 알 수 있었다. 또한 동해 탄성파 탐사자료의 탄성파 음원 모음도에서 나타나는 해저면 기인 강진폭 위상역전 반사파(BSR: bottom simulated reflector)와 산란파들이 불균질 수치 모형실험에서 적절하게 구현되었음을 알 수 있었다.