• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.5
• /
• pp.667-670
• /
• 2014

Six adult fish of Laemonema nana, belonging to the family Moridae, were collected in a bottom trawl in the southern coastal waters of Korea. These specimens were characterized by having 46-52 second dorsal fin rays (vs. 57-67 for Lotella phycis and 68 for Physiculus japonicus), two pelvic fin rays (vs. 9 for L. phycis and 6-7 for P. japonicus), and lateral line descending abruptly below the anterior part of the second dorsal fin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.183-188
• /
• 2003

Non-molding and welding line happen by the assembly of gas at the connector terminal. There is not good phenomenon of burr by increasing the over injection pressure, the temperatures of die and resin to prevent from them. Therefore, the connector mold to apply the vacuum molding system is developed in this study. The vacuum pressure is controlled systematically with the optimum conditions in the important ingredients of injection molding that are the temperatures of melting resin and die and cooling condition. The badness in charging is cleared by making a vacuum to non-charging part of the deep bottom part of each cavity. And the vacuum system to reduce the cycle time is applied as the study envelopment of molding work. So, the good product and the productivity improvement can be obtained in this study.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.199-208
• /
• 1990

In order to eximine the body form of the physically handicapped people, the 11 items of angle, 54 items of size and weight of the subjects were measured body silhouetter photographs and with the Martin's anthrophometeric instrument respectively. The subjects were consist of 37 boy students who are 13-19 years old and hemiplegias caused by cerebral palsy. And then the comparison between normal and paralysis sides, analysis of somatotypes with the body silhouetter photographs, ANOVA for effect of somatotype on measuring items for angles, and factor analysis for all items were carried out. The results were as follows: 1. The results of measuring are difference between normal and paralysis sides. 2. The items shown significant differences between normal and paralysis sides are diagonal anterior chest B, scapula length, armscye girth, diagonal posterior chest A, and arc of the bust. 3. The percentage of each somatotype shows the order of bending somatotype, turning over somatotype, turning over-bending somatotype, and standard somatotype in the upper body. There are significant differences between somatotypes and sternalis up, sternalis down, scapula, vertebialis, ${\alpha}$, and ${\beta}$ angles respectively. 4. From the result of factor analysis, front and back sections, length items of the upper part and the lower part from the bust line, and the upper size items at the bottom of armscye were abstracted.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.281-284
• /
• 2006

After building a ship in a shipyard, there are so many repeated inspection of welding seam defects and painting status before delivering to the ship's owner. An inspection on the bottom part of a ship in commercial service should be done in every two years for the purpose of safety and for the prevention of ship speed deterioration. conventional welding seam inspection systems are rely on the visual inspection by human or the ultrasonic inspection for the selective part of a ship. This paper suggests a remote controlled inspection system for the examination of large ships or steel structures. The proposed system moves in contact with the ship under inspection and have a CCD camera to provide visual-guidance information to a remotely located human worker. Additionally this system utilizes a weld line tracking algorithm for an optimal position control. We verified the effectiveness of the inspection system by experimental data.

• Journal of the Korean Society of Costume
• /
• v.63 no.7
• /
• pp.31-48
• /
• 2013

It goes without saying that Yi Mae-Bang, as the sole owner of two of the intangible cultural assets including No. 27 Seungmu in 1987 and No. 97 Salpuri Chum, is a top-notch Korean traditional dancer. Moreover, in regards to traditional clothing, he is also known as the only traditional dancer who directly performs on stage as well as analyzes traditional clothing in order to apply them into his own dance performances by designing and producing them to meet his artistic spirit. In order to examine how Yi Mae-Bang's unique and creative stage clothing was developed, and what kind of process it went through to possess its unique style, which draws the attentions of people with its harmony of beauty and dance, this research first examined the change of the composition through the yearly picture data. Before 1984, the composition of the Salpuri Chum clothes changed by putting on 'Jeogori' on the 'Mudong-Bok' without the 'Kweia' (sleeveless), and in 1999 'Mudong-Bok' became widened with the decoration of embroidered hem making it more attractively colorful. after 2000 it became more splendidly adorned by embroidering hem on widened Mudong-Bok and tucking 'Kweja' in the layers which created silhouette like a dress that is seemingly wider and luxuriant than a skirt. One of notable features of Yi Mae-Bang's Salpuri is that its cloth and cuff ribbons are lightly colored in different colors enclosing the tip part. As for the ribbons, it was also changed as time went by from direct-cutting of the cloth just like the A-line of Mudong-Bok to drawing a diagonal line less than 5cm above the ribbon and 8cm below the ribbon so that it takes the form of getting widened as it gets to the lower part, and its length was also elongated in proportion to that of the bottom of Mudong-Bok.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.281-289
• /
• 2020

Purpose: This study analyzes the self-efficacy and CAD/CAM practice of dental technology students with the aim of providing data that will be useful for improving CAD/CAM education. Methods: A questionnaire survey on self-efficacy and CAD/CAM practice was given to students who participated in face-to-face classes in the Department of Dental Technology at a college in Daegu and Gyeongsangnam-do. The survey period was two weeks long (June 15, 2020 to July 2, 2020), and 84 students completed the questionnaire. Results: The higher the self-efficacy, the fewer difficulties or mistakes students made in CAD/CAM practice. The most difficult parts of the scanning process were the top and bottom arc operation and the bite match arc insertion. The most difficult part of the design work was the use of (multiple) tools. The difference between the degree of difficulty and the degree of mistakes during the practical course was shown as the margin line setting in the design work. Setting the margin line was not difficult, but the degree of mistakes was nonetheless high. In the CAM process, height control was the most difficult part, but the degree of mistakes did not differ according to students' self-efficacy. Conclusion: Given that higher self-efficacy correlated with fewer difficulties or mistakes in CAD/CAM practice, students should be encouraged to enhance their self-efficacy. This may be done by improving their satisfaction with their major course of study, forming friendly relations with their colleagues, and increasing the ratio of performance rather than observation in CAD/CAM practice.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.24-34
• /
• 2001

The authors reconstruct a mooring type underwater positioning system to measure the movement of bag-net in a set-net by long base line mode with four transponders attached on the bag-net in latitudinal and a transponder fixed on the sea bed. To confirm the practical use of the system, the field experiments were carried out at the Jaran Bay, Kosung, Kyungnam Prov., on October 6, 2000 (neap tide) and November 28, 2000 (spring tide). And the vertical oscillation of bag-net was observed with three data loggers attached on the bottom of bag-net in longitudinal on November 28, 2000. The longitudinal movement range, the latitudinal one and the vertical one of the bag-net were 3.2 m, 3.4 m and 2.1 m. respectively. At the spring tide, these variations were 7.8 m, 7.8 m and 5.0 m, respectively. The vertical oscillation range about the bottom of the bag-net at near point of the slope net, at the middle part and at far point from the slope net were 3.2 m, 3.7 m and 8.4 m, respectively. The depth of the bottom net was decreased and its vertical oscillation appeared frequently when the current speed was more than 10 cm/s and the current direction was significantly different from the longitudinal axis of the bag-net. The variation of hydrophone coordinates measured by the transponder fixed on the sea bed presents that hydrophones equipped to the frame line of the set-net could be moved within several meters due to the tidal current. The fact indicates that the compensation of hydrophone coordinates is necessary to reduce the measuring errors. The position measuring errors of x, y and z axis of the system measured in the cage of aquaculture were 0.6 m, 0.8 m, and 1.2 m, respectively. And the errors of the transponders those were close to the base lines or placed in the baselines were smaller than those of others.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.401-409
• /
• 1983

The distribution of anchovy eggs and larvae was studied using the ichthyoplankton samples and oceanographic data collected in the western and southern waters of Korea over the period of April through June in 1981 and 1982. Three water masses, the Tsushima Warm Current, the South Korean Coatal Water and the Yellow Sea Bottom Cold Water, are found to exert extensive influences of the distribution of anchovy eggs and larvae. The Tsushima Warm Current contacts with the South Korean Coastal Water to produce a coastal front between Cheju Island and Tsushima Island in the southern waters of Korea. Off the west coast of Korea, a coastal front is also formed running parallel with the western coast-line of Korea in the area between the Yellow Sea Bottom Cold Water and the extended part of the South Korean Coastal Water. In the southern waters of Korea anchovy eggs were found chiefly in the coastal waters inside the front, and larvae appeared to both sides on the front. The distribution of anchovy eggs and larvae off the west coast of Korea, however, was limited largely to the coastal waters of more than $12^{\circ}C$ in temperature. In the southern waters of Korea prelarvae appeared in the coastal area, and postlarvae in the offshore area. While in the western waters of Korea prelarvae were found in the southern part of the waters, and postlarvae in the northern part. Anchovy eggs and larvae were distributed in the considerably limited area of the coastal waters off the south coast of Korea in 1981 when the temperature gradient of the coastal front was sharper than in 1982.

• 한국해양학회지
• /
• v.13 no.1
• /
• pp.1-8
• /
• 1978

A seismic reflection Survey was carried out in the offshere area between Geoje Island and Namhae Island, utilizing the echosounder with the frequency 28KHz and thd Uniboom with the filter band 800∼2000Hz. The results show the submarine topography, sedimentary layer structure and the depth distribution of the base rock. The water depth of the sea in the survey area is less than 80m; up to 40m contour line the sea bottom surface has a slight dip(about 1/1000), while in the zone deeper than 40m the bottom topography has a irregular relief. The thickness of the whole sedimentary deposit is about 20∼70m and divided into 3 layers: Upper layer(A layer) with horizontal laminae, intermediate layer(B layer) with cross-bedding and groove structure, and lower layer(C layer) not showing any sedimentary structure on the seismic reflection profile. The surface of the base rock is deeper gradually in the south-eastern part of the survey area and extends to 140m depth. The vertical sediments sequences, composed of B layer and A layer, show the type of transgressive sequences. It is interpreted that B layer was formed at one period when the sea level was lower 40∼60 than the present and ince then, following the rising of the sea level, A layer was deposited.