• 제목/요약/키워드: bottom ash

검색결과 435건 처리시간 0.021초

폐타이어-저회가 혼합된 유동성 복합지반재료의 공학적 특성 (Engineering Properties of Flowable Composite Soil with Waste Tire and Bottom Ash)

  • 김윤태;강효섭
    • 한국해양공학회지
    • /
    • 제24권3호
    • /
    • pp.52-58
    • /
    • 2010
  • This study investigated the engineering properties of waste tire powder-bottom ash added composite soil, which was developed to recycle dredged soil, bottom ash, and waste tire powder. Test specimens were prepared using 5 different percentages of waste tire powder content(0%, 25%, 50%, 75%, and 100% by weight of the dry dredged soil), three different percentages of bottom ash content (0%, 50%, and 100% by weight of the dry dredged soil), and three different particle sizes of waste tire powder (0.1~2 mm, 0.9~5 mm, and 2~10 mm). Several series of unconfined compression tests, direct shear tests, and flow tests were conducted. The experimental results indicated that the waste tire powder content, particle size of waste tire powder, and bottom ash content influenced the strength and stress-strain behavior of the composite soil. The flow value increased with an increase in water content, but decreased with an increase in waste tire powder content.

호기순환 호흡계를 이용한 토양처리 석탄바닥재의 유기물 분해에 미치는 영향 (Effects of Soil-Amended Bottom Ash on Decomposition Rates of Organic Matter as Investigated by an Enforced-Aeration Respirometer)

  • 정석호;정덕영;한광현
    • 한국토양비료학회지
    • /
    • 제45권2호
    • /
    • pp.253-259
    • /
    • 2012
  • 석탄 연소 부산물인 비산회 (fly ash)는 이산화탄소 발생을 저감하고 토양 탄소를 격리하는 효과가 있음이 보고된 바 있다. 같은 연소 부산물인 석탄바닥재 (bottom ash)는 비산회와 유사한 화학적 성질을 가지고 있고, 아울러 다공성으로 토양미생물들이 정착하는 적절한 담체로서의 기능을 가지고 있다. 이에 본 연구는 성질이 다른 유기물들 (헤어리베치, 청보리, 유박비료)이 처리된 토양에서 석탄바닥재가 토양 미생물들에 의한 유기물 분해 및 호흡량에 미치는 영향을 조사하였다. 미생물에 의한 유기물의 분해속도는 유박비료, 헤어리베치, 청보리의 순으로 높게 나타났고, 유기물과 석탄바닥재를 함께 처리하였을 때, 유의하게 감소하였다. 이산화탄소 발생량의 경시적인 변화는 유기물의 이분해성에 의존하였으나, 석탄바닥재를 처리하였을 때 유의하게 발생량이 감소하였다. 총 누적 이산화탄소 발생량 또한 이와 유사한 결과를 보였다. 석탄바닥재가 함유하고 있는 중금속 등과 같은 유해물질의 농도가 높지 않다면, 본 연구의 결과들은 석탄바닥재가 토양 처리 유기물의 이산화탄소 발생 저감 및 토양 탄소격리에 긍정적으로 기여 할 수 있는 소재로서 가능성이 있음을 보여준다.

도시 쓰레기 소각재를 혼입한 시멘트 모르타르의 특성 (Chracteristics of Cement Mortar Mixed with Incinerated Urban Solid Waste)

  • 장준호
    • 한국환경과학회지
    • /
    • 제19권5호
    • /
    • pp.639-646
    • /
    • 2010
  • Differently from fly ash, the bottom ash produced from incinerated urban solid waste has been treated as an industrial waste matter, and almost reclaimed a tract form the sea. If this waste material is applicable to foam concrete as an fine aggregate, however, it may be worthy of environmental preservation by recycling of waste material as well as reducing self-weight of high-rising structure and long-span bridge. This research has an objective of evaluating the effects of application of bottom ash on the mechanical properties of foam concrete. Thus, the ratio of bottom ash to cement was selected as a variable for experiment and the effect was tested by compression strength, flexural strength, absorption ratio, density, expansion factor. It can be observed from experiments that the application ratios have different effects on the material parameters considered in this experiment, thus major relationship between application ratio and each material parameter were finally introduced. The result of this study can be applied to decide a optimal mix design proportion of foam light-weight concrete while bottom ash is used as an fine aggregate of the concrete.

EPDM/Bottom Ash 복합재료의 형태학 및 물리적 특성 (Morphology and Physical Properties of EPDM Composites Containing Bottom Ash and Talc)

  • 김영호;심현석;이민호;민병훈;김정호
    • 청정기술
    • /
    • 제19권3호
    • /
    • pp.272-278
    • /
    • 2013
  • EPDM 고무는 여러 가지 용도에 많이 사용되고 있는 소재이다. 화력발전소의 소각로에서 부산물로 발생하는 버텀애쉬(bottom ash)는 플라이애쉬(fly ash)와는 달리 재활용이 거의 되지 않고 있는데, 본 연구에서는 버텀애쉬 및 탈크를 포함하는 EPDM 복합소재를 roll-mill을 이용하여 제조한 후, 기계적, 열적, 전기적 및 경화 특성 등을 분석하였다. 또한 주사전자현미경(scanning electron microscopy, SEM)을 이용하여 복합재료의 모폴로지를 관찰하였다. 일부의 버텀애쉬는 계면활성제를 이용하여 개질한 후 EPDM 복합재료를 제조하여 개질의 효과를 조사하였다. 결과로 개질된 버텀애쉬 및 탈크를 포함하는 EPDM 복합재료는 우수한 인장 강도 및 인장 탄성률을 나타내었다. EPDM 복합재료의 체적 저항은 $10^{14}{\Omega}cm$ 이상으로 전기 절연체로서 저항 임계치를 만족하였고, 열적 물성 결과 버텀애쉬 및 탈크가 EPDM의 열적 안정성을 높여 주는 것으로 확인되었다.

화력발전소 바닥재의 수용성 금속이온 용출가능성 조사 (Investigation on the Leaching Potential of Water-Soluble Metals from Bottom Ashes in Coal-fired Power Plants)

  • 서효식;고동찬;최한나
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제27권1호
    • /
    • pp.39-49
    • /
    • 2022
  • Bottom ash generated from thermal power plants is mainly disposed in landfills, from which metals may be leached by infiltrating water. To evaluate the effect of metals in leachate on soil and groundwater, we characterized bottom ash generated from burning cokes, bituminous coal, the mixture of bituminous coal and wood pellets, and charcoal powder. The bottom ash of charcoal powder had a relatively large particle size, and its wood texture was well-preserved from SEM observation. The bottom ash of charcoal powder and wood pellets had relatively high K concentration from total element analysis. The eluates of the bottom ash samples had appreciable concentrations of Ca, Al, Fe, SO4, and NO3, but they were not a significant throughout the batch test. Therefore, it is considered that there is low possibility of soil and groundwater contamination due to leaching of metal ions and anions from these bottom ash in landfills. To estimate the trend of various trace elements, long-term monitoring and additional analysis need to be performed while considering the site conditions, because they readily adsorb on soil and aquifer substances.

A Study on Physical Properties of Mortar Mixed with Fly-ash as Functions of Mill Types and Milling Times

  • Seo, Sung Kwan;Chu, Yong Sik;Shim, Kwang Bo;Jeong, Jae Hyun
    • 한국세라믹학회지
    • /
    • 제53권4호
    • /
    • pp.435-443
    • /
    • 2016
  • Coal ash, a material generated from coal-fired power plants, can be classified as fly ash and bottom ash. The amount of domestic fly ash generation is almost 6.84 million tons per year, while the amount of bottom ash generation is 1.51 million tons. The fly ash is commonly used as a concrete admixture and a subsidiary raw material in cement fabrication process. And some amount of bottom ash is used as a material for embankment and block. However, the recyclable amount of the ash is limited since it could cause deterioration of physical properties. In Korea, the ashes are simply mixed and used as a replacement material for cement. In this study, an attempt was made to mechanically activate the ash by grinding process in order to increase recycling rates of the fly ash. Activated fly ash was prepared by controlling the mill types and the milling times and characteristics of the mortar containing the activated fly ash was analyzed. When the ash was ground by using a vibratory mill, physical properties of the mortar mixed with such fly ash were higher than the mortar mixed with fly ash ground by a planetary mill.

콘크리트용 골재로서의 Bottom Ash 활용성 평가 (Evaluation of Bottom Ash on the Application for the Aggregate of Concrete)

  • 김상철
    • 한국건설순환자원학회논문집
    • /
    • 제5권2호
    • /
    • pp.105-115
    • /
    • 2010
  • 산업의 발전과 함께 산업폐기물의 증가와 그에 따른 처리할 회사장 부족, 유해한 성분 함유로 인한 환경상의 문제 등에 대한 해결 방안의 일환으로, 본 연구에서는 석탄 화력발전소에서 발생되는 석탄회 중에서 bottom ash를 대상으로 콘크리트용 골재로서의 유용성 여부를 평가하고자 하였다. 먼저 잔골재와 굵은 골재의 대체재로서의 적절성 평가를 위해 경도시험, 입도분포시험, 흡수량시험, S.E.M 분석시험 등의 물리적 시험을 수행하였고, 화학적 시험으로는 강열감량시험, X-ray를 통한 분석시험을 수행하였다. 콘크리트에 적용하였을 때 미치는 영향은 대체재로서의 비율을 달리하여 작업성 확보차원에서 슬럼프의 변화를 측정하였고, 굳은 콘크리트에서는 강도확보, 내투수성, 동결융해 저항성, 내황산성, 탄산화 저항성에 대해 평가하였다. 실험결과, 미립분의 부족과 일부 bottom ash에서 결속력 상의 문제가 존재하였으나 천연골재와 혼합하여 사용하고 배출시 공정 개선을 한다면 골재로써 충분히 사용성이 있는 것으로 평가되었다. 또한, 다공성을 갖고 있어 작업성 확보를 위해서는 단위수량이나 감수제의 증가가 요구되지만 일반강도 한도 내에서는 일정 비율로 천연골재와 혼합하여 사용하면 강도 확보에 문제가 없고 오히려 내구성 확보에 있어서는 유리한 것으로 나타났다.

  • PDF

물-시멘트비 및 바텀애쉬 대체율에 따른 콘크리트의 공학적 특성에 관한 실험적 연구 (An Experimental Study on the Engineering Properties of Concrete according to W/C and Replacement Ratio of Bottom Ash)

  • 최세진;정용;오복진;김무한
    • 콘크리트학회논문집
    • /
    • 제15권6호
    • /
    • pp.840-847
    • /
    • 2003
  • 최근 전력사용량의 증가에 따라 화력발전소에서 발생하는 석탄회량도 증가하고 있으며, 이로 인한 환경오염, 생태계 파괴 등의 문제가 크게 대두됨에 따라 이러한 석탄회를 재활용하기 위한 노력이 국가 사회적으로 시급히 요구되고 있다. 본 연구는 물-시멘트비 및 바텀애쉬 대체율에 따른 콘크리트의 공학적 특성을 비교검토하기 위하여, 물-시멘트비를 40, 50, 60%, 바텀애쉬 대체율을 0, 10, 20, 35, 50%로 설정하여 제조한 콘크리트의 특성을 비교 분석함으로서 바텀애쉬의 효율적 활용방안 및 이용기술의 개발을 위한 기초자료를 제시하고자 한다. 실험결과, 블리딩량의 경우 바텀애쉬 대체율이 증가할수록 다소 감소하였으며, 바텀애쉬를 대체한 콘크리트의 염화물 함유량은 대체율이 증가할수록 상대적으로 증가하였으나, 콘크리트 표준시방서에서 제안하고 있는 $0.30kg/m^3$ 이하를 모두 만족하는 것으로 나타났다. 압축강도의 경우 바텀애쉬를 대체한 콘크리트와 플레인콘크리트가 유사한 수준으로 나타났으며, 바텀애쉬 대체율이 증가할수록 상대적으로 중성화 깊이가 증가하였으나 물-시멘트비가 감소함에 따라 이러한 차이가 감소하는 것으로 나타났다.

바텀 애시를 콘크리트 잔골재로 사용하기 위한 활용성에 관한 연구 (Bottom Ash on the Application for Use as Fine Aggregate of Concrete)

  • 김성수;이정배;박승호
    • 한국건설순환자원학회논문집
    • /
    • 제2권3호
    • /
    • pp.173-179
    • /
    • 2014
  • 본 연구는 석탄을 사용하여 발전한 후 남은 폐기물인 석탄회를 콘크리트의 잔골재로 재활용하기 위한 실험적 연구이다. 석탄회는 크게 플라이 애시와 바텀 애시로 구분될 수 있다. 플라이 애시의 경우 콘크리트의 배합 시 시멘트를 대체하는 재료로 많이 활용되고 있는 반면 바텀 애시의 경우 대부분이 매립되고 있는 등 재활용률이 낮은 실정이다. 본 연구에서는 재활용률이 낮은 바텀 애시의 활용률을 증대시키고자 콘크리트의 잔골재로 일부 치환하였으며 활용성을 확인하였다. 콘크리트 배합 시 물시멘트 비를 고정한 상태에서 바텀 애시의 사용량을 증가 시키게 되면 작업성이 현저히 떨어지게 되므로 일정 수준이상 사용하기 위한 대책이 필요하다. 이러한 문제를 해결하기 위하여 폴리카르본산계 고성능 감수제를 사용하여 콘크리트를 배합하였고 콘크리트 비빔 직후 및 비빔 1시간 후 유동성 및 공기연행성을 비교하여 실제 레미콘이나 배치 플랜트에서 생산된 콘크리트가 현장에 타설되는 시간을 모사하였다. 연구 결과 바텀 애시를 잔골재의 30%정도 치환한 콘크리트 비빔 1시간 후 작업성과 공기연행성을 확보할 수 있었고, 압축강도는 다소 감소하였으나 바텀 애시를 콘크리트 잔골재로 사용할 수 있는 가능성을 확인할 수 있었다.

Fly Ash을 이용한 Shotcrete 재료의 개발에 관한 연구 (A Study on Development of Shotcrete Material using Fly Ash)

  • 한오형;강추원
    • 화약ㆍ발파
    • /
    • 제21권2호
    • /
    • pp.21-30
    • /
    • 2003
  • 현재 터널 굴착시 기초 지보수단으로 활용되고 있는 숏크리트는 암반의 굴착 특성상 조기에 얇은 두께로 타설하여도 높은 강도를 유지할 수 있다는 장점 때문에 그동안 우수한 장비와 재료가 개발되어 비약적인 발전을 거듭해 오고 있다. 또한, 계측기술의 발달로 지하암반 거동상태도 조기에 자세히 파악되어 강도와 두께 등 거의 정확한 설계가 이루어지고 있으며, 신소재의 보강재료도 지속적으로 개발되고 있다. 국내 석탄 화력발전소에서 발생되는 석탄회에는 fly ash와 bottom ash가 있으며, 이러한 석탄회는 시멘트, 골재, 건축, 토목 및 농수산 분야에 이르기까지 많은 분야에 기술개발이 되었으며, 연구가 활발히 진행 중에 있다. 따라서, 본 연구에서는 fly ash를 혼합한 콘크리트를 숏크리트 재료로서 활용하기 위해 기존의 숏크리트 배합설계에서 fly ash를 시멘트의 대체재로서 사용할 때, 압축강도의 향상 및 굴착면의 타설 리바운드 율을 저하시키는 최적의 함량에 대하여 실험을 실시하였다. 그 결과, fly ash를 시멘트에 15% 중량 치환했을 때, 약 10%의 압축강도의 향상과 리바운드 율이 6%감소되었다.