Journal of the Institute of Electronics and Information Engineers
/
v.51
no.3
/
pp.177-184
/
2014
In chemical vapor deposition(CVD) tungsten silicide(WSix) dual poly gate(DPG) scheme, we observed the fluorine effects on gate oxide using the electrical and physical measurements. It is found that in fluorine-rich WSix NMOS transistors, the gate thickness decreases as gate length is reduced, and it intensifies the roll-off properties of transistor. This is because the fluorine diffuses laterally from WSix to the gate sidewall oxide in addition to its vertical diffusion to the gate oxide during gate re-oxidation process. When the channel length is very small, the gate oxide thickness is further reduced due to a relative increase of the lateral diffusion than the vertical diffusion. In PMOS transistors, it is observed that boron of background dopoing in $p^+$ poly retards fluorine diffusion into the gate oxide. Thus, it is suppressed the fluorine effects on gate oxide thickness with the channel length dependency.
Proceedings of the Korean Vacuum Society Conference
/
1998.02a
/
pp.71-72
/
1998
반도체 집적 공정의 발달로 차세대 소자용으로 30 A 이하의 극 박막 Si02 절연막이 요구되고 있으며, 현재 제품으로 50-70 A 두께의 절연막을 사용한 것이 발표되고 있다. 절연막의 두께가 앓아질수록 많은 문제가 발생할 수 있는데 그 예로 절연막의 breakdo때둥에 의한 신뢰성 특성의 악화, 절연막올 통한 direct tunneling leakage current, boron풍의 dopant 침투로 인한 소자 특성 ( (Threshold Voltage)의 불안, 전기적 stress하에서의 leakage current증가와 c charge-trap 및 피terface s쩌.te의 생성으로 인한 소자 특성의 변화 둥으로 요약 된다. 절연막의 특성올 개선하기 위해 여러 가지 새로운 공정들이 제안되었다. 그 예로, Nitrogen올 Si/Si02 계면에 doping하여 절연막의 특성을 개선하는 방법 으로 고온 열처 리 를 NH3, N20, NO 분위 기 에서 실시 하거 나, polysilicon 또는 s silicon 기판에 nitrogen올 이온 주입하여 열처리 하는 방법, 그리고 Plasma분 위기에서 Nitrogen 함유 Gas를 이용하여 nitrogen을 doping시키는 방법 둥이 연구되고 있다. 또한 Oxide cleaning 후 상온에서 성장되는 oxide를 최소화 하여 절연막의 특성올 개선하기 위하여 LOAD-LOCK을 이용하는 방법, C뼈피ng 공정의 개선올 통한 contamination 감소와 silicon surface roughness 감소 로 oxide 신뢰성올 개선하는 방법 둥이 있다. 구조적 인 측면 에 서 는 Polysilicon 의 g없n size 를 최 적 화하여 OxideIPolysilicon 의 계면 특성올 개선하는 연구와 Isolation및 Gate ETCH공정이 절연막의 특성에 미 치 는 영 향도 많이 연구되 고 있다 .. Plasma damage 가 Oxide 에 미 치 는 효과 를 제어하는 방법과 Deuterium열처리 퉁올 이용하여 Hot electron Stress하에서 의 MOS 소자의 Si/Si02 계면의 신뢰성을 개선하고 있다. 또한 극 박막 전연막의 신뢰성 특성올 통계적 분석올 통하여 사용 가능한 수명 올 예 측 하는 방법 과 Direct Tunneling Leakage current 를 고려 한 허 용 가농 한 동작 전 압 예측 및 Stress Induced Leakage Current 둥에 관해서 도 최 근 활발 한 연구가 진행되고 있다.
Proceedings of the Korea Crystallographic Association Conference
/
2002.11a
/
pp.42-43
/
2002
반도체 디바이스의 발전은 높은 직접화 및 동작 속도를 추구하고 있으며, 이를 위해서 MOSFET의 scale down시 발생되는 문제를 해결해야만 한다. 특히, Channel이 짧아짐으로써 발생하는 device의 열화현상으로 동작전압의 조절이 어려워 짐을 해결해야만 하며, gate oxide 두께를 줄임으로써 억제할 수 있다고 알려져 왔다. 현재, gate oxide으로 사용되고 있는 SiO2박막은 비정질로써 ~8.7 eV의 높은 band gap과 Si기판 위에서 성장이 용이하며 안정하다는 장점이 있으나, 두께가 1.6 nm 이하로 얇아질 경우 전자의 direct Tunneling에 의한 leakage current 증가와 gate impurity인 Boron의 channel로의 확산, 그리고 poly Si gate의 depletion effect[1,2] 등의 문제점으로 더 이상 사용할 수 없게 된다. 2001년 ITRS에 의하면 ASIC제품의 경우 2004년부터 0.9~l.4 nm 이하의 EOT가 요구된다고 발표하였다. 따라서, gate oxide의 물리적인 두께를 증가시켜 전자의 Tunneling을 억제하는 동시에 유전막에 걸리는 capacitance를 크게 할 수 있다는 측면에서 high-k 재료를 적용하기 위한 연구가 진행되고 있다[3]. High-k 재료로 가능성 있는 절연체들로는 A1₂O₃, Y₂O₃, CeO₂, Ta₂O, TiO₂, HfO₂, ZrO₂,STO 그리고 BST등이 있으며, 이들 재료 중 gate oxide에 적용하기 위해 크게 두 가지 측면에서 고려해야 하는데, 첫째, Si과 열역학적으로 안정하여 후속 열처리 공정에서 계면층 형성을 배제하여야 하며 둘째, 일반적으로 high-k 재료들은 유전상수에 반비례하는 band gap을 갖는 것으로 알려줘 있는데 이 Barrier Height에 지수적으로 의존하는 leakage current때문에 절연체의 band gap이 낮아서는 안 된다는 점이다. 최근 20이상의 유전상수와 ~5 eV 이상의 Band Gap을 가지며 Si기판과 열역학적으로 안정한 ZrO₂[4], HfiO₂[5]가 관심을 끌고 있다. HfO₂은 ~30의 고유전상수, ~5.7 eV의 높은 band gap, 실리콘 기판과의 열역학적 안전성 그리고 poly-Si와 호환성등의 장점으로 최근 많이 연구가 진행되고 있다. 또한, Hf은 SiO₂를 환원시켜 HfO₂가 될 수 있으며, 다른 silicide와 다르게 Hf silicide는 쉽게 산화될 수 있는 점이 보고되고 있다.
Recently, carrier-selective contact solar cells have attracted much interests because of its high efficiency with low recombination current density. In this study, we investigated the effect of phosphorus doped amorphous silicon layer's characteristics on the passivation properties of tunnel oxide passivated carrier-selective contact solar cells. We fabricated symmetric structure sample with poly-Si/SiOx/c-Si by deposition of phosphorus doped amorphous silicon layer on the silicon oxide with subsequent annealing and hydrogenation process. We varied deposition temperature, deposition thickness, and annealing conditions, and blistering, lifetime and passivation quality was evaluated. The result showed that blistering can be controlled by deposition temperature, and passivation quality can be improved by controlling annealing conditions. Finally, we achieved blistering-free electron carrier-selective contact with 730mV of i-Voc, and cell-like structure consisted of front boron emitter and rear passivated contact showed 682mV i-Voc.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
2017.05a
/
pp.513-516
/
2017
When stored for long periods in a powder-based device (PMD), the explosive power in the device is aged and the explosive power is changed. Thus, The gunpowder used in the PMD must be chemically and physically stable for both internal and external factors. Since $BKNO_3$ and THPP are used as representative gunpowder, thermodynamic and kinetic analyzes were performed based on these gunpowders. Differential scanning calorimeter (DSC) was used to analyze the calorific value and reaction rate. As a result, there was no significant change in caloric value and reaction rate in THPP. In addition, XPS and TEM-EDS analyzes were performed to confirm the formation of oxide films directly related to aging, and no oxide films were observed as a result of thermal analysis. In addition, XPS and TEM-EDS analyzes were performed to confirm the formation of oxide films directly related to aging. As a results, no oxide films were observed. It can be concluded that THPP is the most famous gunpowder in terms of long-term stability.
Glasses were prepared with compositions of $(13-x)BaO-80B2_O_3-7Li_2O{\cdot}xSm_2O_3$, BBLSx(x=0.5, 0.4, 0.3) by melting the starting materials of boron oxide(99.9%), lithium oxide(99.9%), barium carbon oxide(99.9%), and samarium oxide(99.9%) and then quenching the melt at $1350^{\circ}C$. This led to good-quality BBLSx(x=0.4, 0.3) and poor-quality BBLSx(x=0.5) glasses. The physical and structural properties of the BBLSx glasses were studied by means x-ray diffraction, scanning electron microscopy(SEM), differential scanning calorimetry(DSC), and dielectric spectroscopy. From the x-ray diffraction and SEM results, the quality of the BBLSx glasses significantly depends on the $Sm_2O_3$ concentration. The x-ray diffraction pattern showed that the crystallites in the BBLSx glasses after heat treatment at $700^{\circ}C$ may be $LiBaB_9O_{15}$. From the DSC results, the glass transition temperatures($T_g$), crystallization temperatures($T_c$), and the maximum temperatures of the crystallized($T_p$) BBLSx glasses all changed with the $Sm_2O_3$ concentration. According to the dielectric spectroscopy results, the values of the real dielectric constant and Tan ${\delta}$ of the BBLSx glasses depended on the $Sm_2O_3$ concentration. The values of the real dielectric constant and Tan ${\delta}$ were also shown to depend on the measuring temperature, possibly due to the ion migration in the bulk of the BBLSx glasses.
Passivating contacts are a promising technology for achieving high efficiency Si solar cells by reducing direct metal/Si contact. Among them, a polysilicon (poly-Si) based passivating contact solar cells achieve high passivation quality through a tunnel oxide (SiOx) and poly-Si. In poly-Si/SiOx based solar cells, the passivation quality depends on the amount of dopant in-diffused into the bulk-Si. Therefore, our study fabricated cells by inserting silicon oxide (SiO2) as a doping barrier before doping and analyzed the barrier effect of SiO2. In the experiments, p+ poly-Si was formed using spin on dopant (SOD) method, and samples ware fabricated by controlling formation conditions such as existence of doping barrier and poly-Si thickness. Completed samples were measured using quasi steady state photoconductance (QSSPC). Based on these results, it was confirmed that possibility of achieving high Voc by inserting a doping barrier even with thin poly-Si. In conclusion, an improvement in implied Voc of up to approximately 20 mV was achieved compared to results with thicker poly-Si results.
Kim, E.D.;Park, J.M.;Kim, S.C.;Min, M.G.;Lee, Y.S.;Song, J.K.;Kostina, A. L.
Proceedings of the KIEE Conference
/
1995.11a
/
pp.348-351
/
1995
A modified silicon direct bonding method has been developed alloying an intimate contact between grooved and smooth mirror-polished oxide-free silicon wafers. A regular set of grooves was formed during preparation of heavily doped $p^+$-type grid network by oxide-masking und boron diffusion. Void-free bonded interfaces with filing of the grooves were observed by x-ray diffraction topography, infrared, optical. and scanning electron microscope techniques. The presence of regularly formed grooves in bending plane results in the substantial decrease of dislocation over large areas near the interface. Moreover two strongly misoriented waters could be successfully bonded by new technique. Diodes with bonded a pn-junction yielded a value of the ideality factor n about 1.5 and the uniform distribution of series resistance over the whole area of horded pn-structure. The suitability of the modified technique was confirmed by I - V characteristics of power diodes and reversly switched-on dynistor(RSD) with a working area about $12cm^2$. Both devices demonstrated breakdown voltages close to the calculation values.
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.114-114
/
2012
Metal-oxide-semiconductor field-effect transistors (MOSFETs)의 critical dimension (CD)가 sub 45 nm로 줄어듬에 따라 기존에 gate dielectric으로 사용하고 있는 SiO2에서 발생되는 high gate leakage current 때문에 새로운 high dielectric constant (k) 물질들이 연구되기 시작하였다. 여러 가지 high-k 물질 중에서, aluminum-oxide (Al2O3)는 높은 dielectric constant (~10)와 전자 터널링 barrier height (~2eV) 등을 가지기 때문에 많은 연구가 되고 있다. 그러나 Al2O3를 anisotropic한 patterning을 하기 위해 주로 사용되고 있는 halogen-based 플라즈마 식각 과정에서 나타나는 Al2O3와 하부 layer간의 낮은 식각 selectivity 뿐만 아니라 표면에 발생되는 defect, stoichiometry modification, roughness 변화 등의 많은 문제점들로 인하여 device performance가 감소하기 때문에 이를 해결하기 위한 많은 연구들이 진행중이다. 따라서 본 연구에서는 실리콘 기판위의 atomic layer deposition (ALD)로 증착된 Al2O3를 BCl3/Ar 중성빔을 이용하여 원자층 식각한 후 식각 특성을 분석해 보았다. Al2O3 표면을 BCl3로 absorption시킨 후 Ar 중성빔으로 desorption 시키는 과정에서 volatile한 aluminum-chlorides와 boron oxychloride가 형성되어 layer by layer로 제거됨을 관찰 할 수 있었다.
Carbothermal reduction has been one of the important processes for the production of ceramic raw materials such as silicon carbide, silicon nitride, boron carbide, etc. The process has also been one of several trials for the recovery of ZnO from ZnO-containing waste. It usually involves two consecutive steps: the evolution of Zn vapor and its oxidation with air. In this study a ZnO-containing raw material is reduced by carbon at $1250^{\circ}C$ and the evolved Zn vapor is oxidized with air, resulting in fine powders of ZnO. computer programs, THERMO and PYROSIM developed by MINTEK, are used to simulate the process thermodynamically and the results are compared with the experimental results. It is shown that the ZnO-containing raw material can be reduced and can form fine ZnO with the yield as high as 98.7% under a proper condition. Based on these results, a process is engineered for the production of ZnO in a rotary kiln at a rate of 3 tons/day. The produced ZnO powders show properties suitable to the usual applications in ceramic industries with a purity of > 95wt% and an average particle size of ∼3${\mu}m$.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.