• 한국재료학회지
• /
• 제17권7호
• /
• pp.376-381
• /
• 2007

Fluorine-doped tin oxide (FTO) thin film was coated on aluminosilicate glass at $450^{\circ}C$ by spray pyrolysis method. In the range of 0-2.7 molar ratio of F/Sn, the variations of electrical conductivity and visible light transmission were investigated. At the F/Sn ratio of 1.765, the film showed the lowest electrical resistivity value of $3.0{\times}10^{-4}{\Omega}\;cm$, the highest carrier concentration of $2.404{\times}10^{21}/cm^3$, and about $8\;cm^2/V{\cdot}sec$ of electronic mobility. The FTO film showed a preferred orientation of (200) plane parallel to the substrate. X-ray photoelectron spectroscopy analysis results indicated that the contents of $Sn^{4+}-O$ bonding are the highest at 1.765 of F/Sn molar ratio.

• Korean Chemical Engineering Research
• /
• 제43권6호
• /
• pp.691-695
• /
• 2005

종이 필터, 면섬유, 유리섬유 필터 등과 같은 지지체 위에 이차성장 수열합성법에 의하여 제올라이트 박막을 제조하였다. 먼저, 제올라이트 종자로 사용하기 위하여 제올라이트 NaA(${\approx}0.5{\mu}m$)와 silicalite-1(${\approx}0.2{\mu}m$) 결정들을 합성하였고, 이 결정들을 지지체의 표면에 화학결합을 이용하여 부착시켰다. 종자 결정으로 덮힌 지지체 위에 NaA나 silicalite-1 제올라이트 박막이 생성되었으며, 제조된 박막은 주사형 전자현미경으로 관찰하였고, X-ray 회절로 분석하였다.

• 폴리머
• /
• 제25권2호
• /
• pp.160-167
• /
• 2001

특성이 서로 다른 polyimide (PI) 전구체와 polyamideimide (PAI) 블렌드물을 solvent casting법으로 제조한 후 열처리하여 다양한 조성의 PI/PAI 복합체를 제조하였다. Poly(amic acid) (PAA)를 전구체로 사용한 PAA/PAI 복합체의 경우 산-염기에 의한 ionic force 또는 수소 결합에 의한 분자간력으로 인하여 좋은 혼화성을 나타냈지만, poly(amic dimethyl ester) (PAME)를 전구체로 사용한 PAME/PAI 복합체는 약화된 분자간력으로 인하여 상분리가 뚜렷하게 발생함을 편광 현미경을 통해 관찰하였다. 전구체의 종류에 관계없이 이미드화된 복합체의 인장 탄성 계수는 선형치보나 증가하였으나 PAI 매트릭스 영역에서의 인장강도 및 전 혼합 조성에서의 파단 변형률은 감소하였다 상대적으로 낮은 유리 전이 온도를 가진 PAI에 의한 가소화 때문에 열적 이미드화 과정 중에 PI 분자쇄의 재정렬이 촉진됨을 편광현미경 및 X-선 회절 결과로부터 확인하였다.

• 한국광학회지
• /
• 제4권4호
• /
• pp.474-479
• /
• 1993

Melt-spun법에 의해서 자왜특성을 갖는 Co-Fe-B ribbon을 제작한 후 광섬유 Mach-Zehnder 간섭계의 sensing-arm에 부착하여 간섭형 자계센서를 구성하였다. Co-Fe-B 자왜변환기로 구성된 자계센서의 동작실험 결과 ac 자왜 응답이 최대가 되는 dc 바이어스 자계는 출력이 0인 바이어스 지점으로부터 0.970e 정도 떨어져 있었으며, 최소 감지자장은 3kHz에서 3.9${\times}10^{-5}$ Oe(rms)/${\sqrt{Hz}}$였다. 응답이 최대가 되는 지점에 바이어스를 고정시켰을 때 ac 자계셈서의 출력이 포화되기 시작하는 입력 자계신호는 1 Oe(rms) 근처였다. Co-Fe-B 자왜변환기의 주파수 특성곡선에서 응답이 피크가 되는 주파수는 ~500Hz였다.

• 복합신소재구조학회 논문집
• /
• 제2권3호
• /
• pp.36-41
• /
• 2011

본 연구에서는 한국산업표준에서 제시하는 콘크리트 강도 시험용 공시체를 이용하여 콘크리트 보강용 FRP의 부착성능을 평가하기 위한 실험방법을 제안하고 이에 따라 FRP의 부착성능을 평가해 보도록 한다. 따라서 탄소섬유와 유리섬유로 이루어진 FRP를 두 겹으로 보강하여 양생한 철근 콘크리트 보에서 보강재의 탈락이 유도될 수 있도록 실험체를 설계하고, 3점 재하 시 적절한 파괴형상 및 부착강도가 나타나는 지를 실험을 통해 관찰하였다. 실험결과, 보강재의 탈락으로 인한 파괴가 유도되었으므로, 본 연구에서 제안된 실험방법을 통하여 크기가 작은 일반강도 콘크리트 실험체에서 FRP의 부착강도를 평가할 수 있는 것으로 사료된다.

• 대한기계학회논문집B
• /
• 제31권2호
• /
• pp.159-166
• /
• 2007

Mixing between two or more reagents is one of important processes in biochemical microfluidics. In efficient micromixer design, it is essential to analyze flow pattern and evaluate mixing efficiency with good precision. In this work, mixing efficiency for Y-channel micromixer is measured by fluorescence intensity using LIF(Laser Induced Fluorescence) Confocal Microscope. The Y-channel micromixers are fabricated with polydimethylsiloxane(PDMS) and those are bonded to glass plate through Plasma bonding. Nile Blue A is injected into the micromixer as a fluorescence dye for measuring of fluorescence intensity by He/Ne laser. For visualization of the flow pattern, dynamic image capturing is carried out using CAM scope. For the comparison with computer simulation, modified SIMPLE algorithm for incompressible flow equation is solved for the same geometry as in the experiment. Throughout the experiments and computer simulation, accurate mixing efficiency evaluation process for a PDMS Y-channel micromixer is established.

• 대한치과교정학회지
• /
• 제43권1호
• /
• pp.29-34
• /
• 2013

Objective: To examine the prophylactic potential of 3 orthodontic bonding adhesives: Fuji Ortho SC, Illuminate, and Resilience. Methods: Thirty-six Wistar Wag rats were randomly divided into 4 groups consisting of 9 rats each. One of the groups received no treatment and was used as a control. In the other groups, individual bands coated with one of the 3 adhesives were cemented to the lower incisors. Enamel samples were obtained after 6 and 12 weeks and analyzed using scanning electron microscopy in combination with energy dispersive spectrometry. Results: Six weeks after band cementation, no fluoride was found in the enamel of the lower incisors. After 12 weeks, there was no fluoride in the enamel of teeth coated with the Resilience composite. However, in the case of the Illuminate composite and the resin-modified glass ionomer Fuji Ortho SC cement, the depth of fluoride penetration reached $2{\mu}m$ and $4.8-5.7{\mu}m$, respectively. Conclusions: Fluoride ions from orthodontic adhesives can be incorporated into the surface layer of the enamel. Orthodontists may apply orthodontic adhesives, such as the Fuji Ortho SC, to reduce the occurrence of caries during orthodontic treatment with fixed appliances.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.300-303
• /
• 2004

To fill the gap of films for metal-to-metal space High density plasma fluorinated silicate glass (HDP FSG) is used due to various advantages. However, FSG films can have critical drawbacks such as bonding issue of top metal at package, metal contamination, metal peel-off, and so on. These problems are generally caused by fluorine penetration out of FSG film. Hence, FSG capping layers such like SRO(Silicon Rich Oxide) are required to prevent flourine penetration. In this study, their characteristics and a capability to block fluorine penetration for various FSG capping layers are investigated through FTIR analysis. FTIR graphs of both SRO using ARC chamber and SiN show that clear Si-H bonds at $2175{\sim}2300cm^{-1}$. Thus, Si-H bond at $2175{\sim}2300cm^{-1}$ of FSG capping layers lays a key role to block fluorine penetration as well as dangling bond.

• 한국포장학회지
• /
• 제29권2호
• /
• pp.103-110
• /
• 2023

The study aimed to enhance the properties of polylactic acid (PLA), a biodegradable and biocompatible substitute for fossil-based plastics. Since the applicability of PLA has been limited because of its toughness and brittleness, microfibrillated cellulose (MFC) and propolis were introduced into PLA. As a result, the PLA film with MFC/propolis showed significant improvements in mechanical strength, elongation, and storage modulus, while also experiencing a decrease in the glass transition temperature. Additionally, the presence of polyphenols in propolis led to a reduction in light transmittance in the UV wavelength range. These enhancements are attributed to MFC tightly bonding with PLA polymers, and propolis acting as a plasticizer and mediator between MFC and PLA, preventing agglomeration. These reinforced PLA films have the potential to be used in flexible packaging for light-sensitive products.

• 한국전기전자재료학회논문지
• /
• 제37권3호
• /
• pp.309-313
• /
• 2024

The key to determining the lifetime of OLED device is how much brightness can be maintained. It can be said that there are internal and external causes for the degradation of OLED devices. The most important cause of internal degradation is bonding and degradation in the excited state due to the electrochemical instability of organic materials. The structure of OLED modeled in this paper consists of a cathode layer, electron injection layer (EIL), electron transport layer (ETL), light emission layer, hole transport layer (HTL), hole injection layer (HIL), and anode layer on a glass substrate from top to bottom. It was confirmed that the temperature generated in OLED was distributed around the maximum of 343.15 K centered on the emission layer. It can be seen that the heat distribution generated in the presented OLED structure has an asymmetrically high temperature distribution toward the cathode, which is believed to be because the sizes of the cathode and positive electrode are asymmetric. Therefore, when designing OLED, it is believed that designing the structures of the cathode and anode electrodes as symmetrically as possible can ensure uniform heat distribution, maintain uniform luminance of OLED, and extend the lifetime. The thermal distribution of OLED was analyzed using the finite element method according to Comsol 5.2.