• 대한소아치과학회지
• /
• 제28권3호
• /
• pp.530-534
• /
• 2001

많은 치과 임상가들은 아말감을 치질에 접착시키기 위해서 여러 접착재료를 이용해왔다. 이 런 술식의 장점으로는 미세누출의 감소로 인한 술후과민증의 감소, 변연파절의 감소, 삭제 후 치질의 강화, 적은 유지형태에서의 수복물의 유지등이 제시되어 왔다. 실제로 임상적 상황에서 이러한 술식의 장점을 확인할 필요가 있다. 이런 접착제가 임상적 환경에서 어떠한 잇점을 보이지 않는다면 시간과 비용을 낭비하는 이런 술식을 정당화하지 못할 것이다. 본 연구에서는 73개의 치아를 대상으로 하여 I급 와동과 II급 와동에 접착형과 비접착형 아말감으로 수복하였다. 접착제로는 Fuji I Glass Ionomer luting cement를 이용하였다. 평균 2년 후에 변연적합성을 평가하였으나 접착형 아말감과 비접착형 아말감 사이에 유의한 차이는 없었다.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.447-459
• /
• 1994

The purpose of this study is to evaluate of shear bond strength of light-curing composite resin to light-curing glass ionomer cement. Composite resin and glass ionomer cement have been widely used as an esthetic filling materials in dental clinics. To achieve better clinical results, sandwich technic was developed with conpensating for disadvantages of these two materials. Especially, light-curing glass ionomer cement provided greately improved bonding strength of teeth or composite resin, and then excellent clinical results can be acquired. In this study, 6 commercial light-curing glass ionomer cements(3 commercial restorative materials : Fuji II LC, Variglass VLC, Vitremer, and 3 commercial lining materials : Fuji Lining LC, Baseline VLC, Vitrebond) were devided two groups. According to manufacturer's appointment, no surface treatment was referred to N groups. Supposing. of clinical practice, surface grinding with water spray at 320 grit sand paper, 40 seconds etching with 37% phosphoric acid, 20 seconds washing, 20 seconds air drying was referred to N groups. Totally 12 experimental groups were devided, and all 120 specimens from 10 specimens of each groups were made. After light-curing composite resin was bonded to light-curing glass ionomer cement, shear bond strength was tested by Instron universal testing machine between glass ionomer cement and composit resin. The data were analyzed statistically by Student's t-test and ANOVA. The obtained results were as follows; 1. In light-curing glass ionomer cement, restorative materials showed higher shear bond strength to composite resin than lining materials(p<0.05). 2. Variglass VLC of restorative material group and Baseline VLC of lining material group have highest shear bond strength to composite resin(p<0.001). 3. In light-curing glass ionomer cement, surface grinding and acid etching reduced shear bond strength to composite resin(p<0.001)}. 4. VGN group 1s highest shear bond strength to composite resin, VBE group is lowest shear bond strength to composite resin(p<0.001).

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3841-3848
• /
• 2022

The effect of modifiers on the optical features and radiation defying ability of the Eu³⁺ ions doped multi constituent glasses was examined. XRD has established the amorphous nature of the specimen. The presence of various functional/fundamental groups in the present glasses was analyzed through FTIR spectra. The physical, structural and elastic traits of the glasses were explored. The variation in the structural compactness of the glass structure according to the incorporated modifier was enlightened to describe their suitability for a better shielding media. For the examined glasses, the metallization criterion value varied in the range 0.613-0.692, indicating the non-metallic character of the glasses with possible nonlinear optical applications. The computed elastic moduli expose the Li-containing glass (BTLi:Eu) to be tightly packed and rigid, which is a requirement for a better shielding channel. Furthermore, the optical bandgap and the Urbach energy values are calculated based on the optical absorption spectra. The evaluated bonding parameters revealed the nature of the fabricated glasses covalent. In addition, we investigated the radiation attenuation attributes of the prepared Eu³⁺ ions doped multi constituent glasses using Phy-X software. We determined the linear attenuation coefficient (LAC) and reported the influence of the five oxides Li₂O₃, CaO, BaO, SrO, and ZnO on the LAC values. The LAC varied between 0.433 and 0.549 cm^-1 at 0.284 MeV. The 39B₂O₃-25TeO₂-15Li₂O₃-10Na₂O-10K₂O-1Eu₂O₃ glass has a much smaller LAC than the other glasses.

• 한국재료학회지
• /
• 제31권2호
• /
• pp.75-83
• /
• 2021

To cope with automobile exhaust gas regulations, ISG (Idling Stop & Go) and charging control systems are applied to HEVs (Hybrid Electric Vehicle) for the purpose of improving fuel economy. These systems require quick charge/discharge performance at high current. To satisfy this characteristic, improvement of the positive electrode plate is studied to improve the charge/discharge process and performance of AGM(Absorbent Glass Mat) lead-acid batteries applied to ISG automotive systems. The bonding between grid and A.M (Active Material) can be improved by applying the Sand-Blasting method to provide roughness to the surface of the positive grid. When the Sand-Blasting method is applied with conditions of ball speed 1,000 rpm and conveyor speed 5 M/min, ideal bonding is achieved between grid and A.M. The positive plate of each condition is applied to the AGM LAB (Absorbent Glass Mat Lead Acid Battery); then, the performance and ISG life characteristics are tested by the vehicle battery test method. In CCA, which evaluates the starting performance at -18 ℃ and 30 ℃ with high current, the advanced AGM LAB improves about 25 %. At 0 ℃ CA (Charge Acceptance), the initial charging current of the advanced AGM LAB increases about 25 %. Improving the bonding between the grid and A.M. by roughening the grid surface improves the flow of current and lowers the resistance, which is considered to have a significant effect on the high current charging/discharging area. In a Standard of Battery Association of Japan (SBA) S0101 test, after 300 A discharge, the voltage of the advanced AGM LAB with the Sand-Blasting method grid was 0.059 V higher than that of untreated grid. As the cycle progresses, the gap widens to 0.13 V at the point of 10,800 cycles. As the bonding between grid and A.M. increases through the Sand Blasting method, the slope of the discharge voltage declines gradually as the cycle progresses, showing excellent battery life characteristics. It is believed that system will exhibit excellent characteristics in the vehicle environment of the ISG system, in which charge/discharge occurs over a short time.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.289-292
• /
• 2009

본 연구에서는 감광유리를 이용한 PEM 마이크로 연료전지 바이폴라 플레이트의 제작 공정을 확립하고 성능 측정을 수행하였다. 감광유리는 무게가 가볍고 내화학성이 뛰어나며 제작이 용이하다. 비등방성 식각, 열 및 UV 접합, 그리고 금속 층 적층을 통한 MEMS 제작 공정이 확립되었다. 성능 측정 결과 활성화 영역에 은이 적층된 마이크로 연료전지의 성능이 그렇지 않은 것보다 우수하였으며 두 경우에서 측정된 마이크로 연료전지의 성능은 모두 국내외 마이크로 연료전지 연구 수준과 동등한 수준이었다.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.19-22
• /
• 2015

The joining behavior of YSZ ceramics to the glasses used in the $9Al_2O_3-24ZrO_2-51SiO_2-16R_2O$ and $9Al_2O_3-24ZrO_2-51SiO_2-7La_2O_3-9R_2O$ (wt%) glass systems was investigated. The glass transition and softening temperatures were determined to be $430^{\circ}C$ and $760^{\circ}C$, respectively. The behavior of the contact angle was inversely proportional to an increase in the temperature. The Zr element in YSZ acted as a nucleation agent and contributed to the bonding behavior at the interface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.906-911
• /
• 2004

In this paper, we used only PR as etching mask, while it used usually Cr/AU as etching mask, and in order to fabricate a photosensor has the increased sensitivity, we investigated on the sensitivity of general type and p-i-n type diode. we designed microchannel size width max 10um, min 5um depth max 10um, reservoir size max 100um, min 2mm. Fabrication of microfluidic devices in glass substrate by glass wet etching methods and glass to glass fusion bonding. The p-i-n diode has higher sensitivity than photodiode. Considering these results, we fabricated p-i-n diodes on the high resistive($4k{\Omega}{\cdot}cm$) wafer into rectangle and finger pattern and compared internal resistance of each pattern. The internal resistance of p-i-n diode can be decreased by the application of finger pattern has parallel resistance structure from $571\Omega$ to $393\Omega$.

• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.37-44
• /
• 2007

Mechanical and thermomechanical properties of the bulk metallic glass (BMG) are so unique that the deformation behavior is largely dependent on the temperature and the strain rate. Impacting behavior of NiTiZrSiSn bulk metallic glass powder during kinetic spraying was investigated in this study. Considering the impact behavior of the BMG, the kinetic spraying system was modified and attached the powder preheating system to make the transition from the inhomogeneous deformation to the homogeneous deformation of impacting BMG particle easy BMG splat formation is considered from the viewpoint of the adiabatic shear instability. It is suggested that the impact behavior of bulk metallic glass particle is determined by the competition between fracture and deformation. The bonding of the impacting NiTiZrSiSn bulk amorphous particle was primarily caused by the temperature-dependent deformation and fracture (local liquid formation) behavior.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.157-163
• /
• 2003

Recently, the number of Prestressed Concrete(PSC) bridges needed repair and retrofit because of the increase of heavy traffic loads and aging of concrete materials. But there are a few related researches about strengthening PSC bridges. In this study, the practicability of strengthening methods for PSC beam were studied by the static experimental method. PSC beams in length of 6m were made with concrete slabs. Glass fiber sheeting and external post-tensioning methods were used for strengthening PSC beams. Some beams were strengthened after cracks to investigate the applicability for cracked bridges. As a result, there strengthening methods were efficient at increasing the cracking loads and the failure load, to decrease deflection and prevent cracks. In the case of using glass fiber retrofit methods, it should be careful in the anchorage problems for preventing the bonding failure.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.178-182
• /
• 1999

Simple binary $Na_2S-SiO_2$ oxysulfide glasses were prepared by a conventional melt-quench method in order to investigate the role of sulfur in glass structure and the electronic state. By X-ray photoelectron spectroscopy(XPS) measurement, S2p binding energy of the glass was observed at approximately 161eV which was close to that of ionic $S^{2-}$. The coordinating state around silicon atoms were investigated by ${29}^Si$ MAS-NMR measurement. The chemical shift observed from NMR supported that sulfur atom was joined to a silicon atom by substituting for an oxygen atom and was present as a non-bridging sulfide ion in low alkali content. On the other hand, it could be presumed that a portion of sulfur anions existed in an isolated state from the glass-network frame at high alkali content. The state of these sulfurs was also studied by Raman spectroscopy in detail.