• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.11a
• /
• pp.69-69
• /
• 2004

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.22-22
• /
• 1997

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.129.1-129
• /
• 2002

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.138.4-138
• /
• 1998

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.613-614
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.615-616
• /
• 2010

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.31-36
• /
• 1994

The bonding behavior of $SiO_{2}$ thin film and glass during VCR head fabrication was investigated, varying the surface roughness of substrate and the sputtering parameter. Insufficient fillings of grooves In the $SiO_{2}$ film with glass was postulated to give rise to the generation of bubble in the glass. The surface roughness of $SiO_{2}$ film was found to depend on that of substrate. The lower the deposition rate, the smoother the surface of film. The bubble free glass after bonding could be obtained using substrate polished with 0.05$\mu\textrm{m}$ $Al_2O_3$ powder under the sputtering condition of 10% oxygen pressure.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.929-935
• /
• 1995

In order to develop COG (Chip On Glass) technology for LCD module interconnecting the driver IC to Al pad electrode on the glass substrate, Anisotropic Conductive Adhesive(ACA) process, the most promising one among COG technologies, was investigated. ACA process was carried out by two steps, dispensing of ACA resin in the bonding area and curing by W radiation. Load on the chip was ranged from 2.0 to 15kg and the chip was heated at about 12$0^{\circ}C$. In resin, the density of conductive particles coated with Au or Ni at the surface were 500, 1000, 2000 and 4000 particles/$\textrm{mm}^2$, and the diameter of particles were 5, 7 and 12${\mu}{\textrm}{m}$. As a result of the experiments, ACA process using ACA particle of diameter and density of 5${\mu}{\textrm}{m}$ and 4000 particles/$\textrm{mm}^2$ respectively shows optimum characteristic with the stabilzed bonding properties and contact resistance.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.226-231
• /
• 2001

The effect of interface reaction between Mn-Zn ferrite single crystal and 61 SiO$_2$-23Pbo-6ZnO-8Na$_2$O-2K$_2$O (mol%) glass on the magnetic properties of the ferrite was investigated. After the reaction, the hump of Zn concentration appeared at the ferrite adjacent to the interface. The initial permeability of the ferrite bonded with the glass at 700 $^{\circ}C$ was 1766 at 100 KHz and reduced to 907 after reaction at 1000$^{\circ}C$. The permeability degradation with increasing reaction temperature was considered to be attributed not only to the sixe diminution of the ferrite due to the its dissolution into the glass but also to the residual stress due to the difference in expansion coefficient between the ferrite and the diffusion layer-the region of the hump of Zn concentration-adjacent to the interface.

• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.43-52
• /
• 2017

Purpose: Physical and chemical properties of gold is most suitable to be restored of teeth to its original state. Recently zirconia was used instead of gold because of esthetical and intimacy of human body. Because of high strength and high abrasion resistance of zirconia, all zirconia artificial tooth lead to wear the original tooth of opposite site. To preserve this original tooth, zirconia artificial tooth covered with dental ceramic glass was used. When joining the zirconia core and dental ceramic glass, difference of their thermal expansion coefficient and wetting ability is generated the residual stress at interface lead to crack. In order to solve this problem, intermediate layer what is called zir-liner was imported to decrease the residual stress and increase the bonding strength. Methods: In this study, to identify the optimum conditions for manufacturing process, various methods to rough the surface of zirconia core were adopted, and vary the thickness of interlayer, and analyzed bond strength. Results: Bond strength of sanding specimens group showed higher than that of non-sanding specimens group, and once applied intermediate layer with sanding specimens showed highest bond strength with 28 MPa. SEM photomicrographs of zirconia cores fired at $1500^{\circ}C$ showed parallel straight lines in sanding and pockmarked surface in blasting surfaces as abrasion traces. Observation of the destruction section after shear test by SEM were carried out. Liner applied non-sanding group and non-liner applied sanding group all showed interfacial crack. Sandblasting group with non-liner showed remained dental ceramic glass on the surface of zirconia. Sandblasting group with once applied liner showed partially remained liner and dental ceramic glass on the surface of zirconia. XRD analysis revealed that sandblasting group showed higher monoclinic peaks than other specimens group and this result was due to the high collision energy for stress induced phase transformation. Conclusions: A study on the improvement of bonding strength between zirconia and dental ceramic glass steadily carried out for the future to practical use.