• 제목/요약/키워드: bond-slip behavior

검색결과 170건 처리시간 0.026초

스트럿-타이 모텔을 이용한 RC 휨부재의 주기적 거동에 관한 연구 (Strut-and-Tie Models for RC Flexural Members under Cyclic Loading)

  • 이수곤;홍성걸
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.453-458
    • /
    • 2001
  • This paper presents the procedure to find the hysteresis loop of RC member using a modified strut-and-tie model. The forces and displacements at critical points, that are initial yielding point, target displacement point, unloading elastic limit, and reloading point after pinching, are investigated with the strut-and-tie models. Using bond-slip relationship, the elastic behavior of tie element is determined. The plastic flow behavior after flexural yielding is expressed by changing the location of longitudinal strut. Determination of pinching effect completes the initial hysteresis loop, assuming that the behavior of the opposite direction is symmetrical form.

  • PDF

Modeling of bond behavior of hybrid rods for concrete reinforcement

  • Nanni, Antonio;Liu, Judy
    • Structural Engineering and Mechanics
    • /
    • 제5권4호
    • /
    • pp.355-368
    • /
    • 1997
  • Fiber reinforced plastic (FRP) rods are used as reinforcement (prestressed or not) to concrete. FRP composites can also be combined with steel to form hybrid reinforcing rods that take advantage of the properties of both materials. In order to effectively utilize these rods, their bond behavior with concrete must be understood. The objective of this study is to characterize and model the bond behavior of hybrid FRP rods made with epoxy-impregnated aramid or poly-vinyl alcohol FRP skins directly braided onto a steel core. The model closely examines the split failure of the concrete by quantifying the relationship between slip of the rods resulting transverse stress field in concrete. The model is used to derive coefficients of friction for these rods and, from these, their development length requirements. More testing is needed to confirm this model, but in the interim, it may serve as a design aide, allowing intelligent decisions regarding concrete cover and development length. As such, this model has helped to explain and predict some experimental data from concentric pull-out tests of hybrid FRP rods.

Bond behavior of lightweight concretes containing coated pumice aggregate: hinged beam approach

  • Beycioglu, Ahmet;Arslan, Mehmet E.;Bideci, Ozlem S.;Bideci, Alper;Emiroglu, Mehmet
    • Computers and Concrete
    • /
    • 제16권6호
    • /
    • pp.909-918
    • /
    • 2015
  • This paper presents an experimental study for determining the bond performance of lightweight concretes produced using pumice aggregate coated with colemanite-cement paste. For this purpose, eight hinged beam specimens were produced with four different concrete mixtures. 14 mm deformed bars with $10{\Phi}$ development lengths were selected constant for all test specimens. All the specimens were tested in bending and load-slip values were measured experimentally to determine the effect of colemanite-cement coated pumice aggregate on bond performances of lightweight concretes. Test results showed that, colemanite-cement coated pumice aggregate increases compressive strength and bond performance of the lightweight concretes, considerably.

PSC 거더와 프리캐스트 바닥판간 부착 강도 평가를 위한 실험적 연구 (Experimental Study on Behavior of Bonding between PSC Girders and Precast Decks)

  • 김인규;정철헌;심창수;김성운
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.770-773
    • /
    • 2004
  • The full-width, full-depth precast panel system is very efficient for the rehabilitation of deteriorated decks as well as for new bridge construction.. The horizontal bond strength at the interface between the two interconnected elements is of primary importance in order to achieve composite action. The strength of the bond between the two precast members should be high enough to prevent any progressive slip from taking place. However, the case when both of the interconnected elements are precast members bonded by means of grout, is not currently addressed by KBDC or AASHTO. This is the main impetus for this study. A total 43 push-off tests were performed to evaluate the horizontal bond strength and to recommend the best practice for the system. Test parameters included different interface surface conditions, different amount and different types of shear connectors. The presence of the shear keys at the top surface of the beam increased the interface bond capacity tremendously compared to the bond capacity with a different surface conditions.

  • PDF

쉬트형 FRP와 콘크리트의 부착특성에 관한 실험적 연구 (Experimental Study on the Bond Charateristics for FRP Sheet-Concrete Interface)

  • 고훈범;고만영
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
    • /
    • pp.361-364
    • /
    • 2006
  • In this study, six specimens were prepared for two type FRP sheets(carbon and polyacetal) to evaluate the behavior of FRP-concrete interfacial bond. A direct tensile test was conducted and the test results show that fiber type influences both bond strength and the shape of strain distribution. The failure mode for carbon type specimens seems to bond failure between concrete and FRP, but for polyacetal type indicates interface failure between FRP and expoxy. The local bond stress-slip relations were obtained from test results, and it was shown good shape for the polyacetal type. But for the carbon type it was scattered.

  • PDF

Finite element implementation of a steel-concrete bond law for nonlinear analysis of beam-column joints subjected to earthquake type loading

  • Fleury, F.;Reynouard, J.M.;Merabet, O.
    • Structural Engineering and Mechanics
    • /
    • 제7권1호
    • /
    • pp.35-52
    • /
    • 1999
  • Realistic steel-concrete bond/slip relationships proposed in the literature are usually uniaxial. They are based on phenomenological theories of deformation and degradation mechanisms, and various pull-out tests. These relationships are usually implemented using different analytical methods for solving the differential equations of bond along the anchored portion, for particular situations. This paper justifies the concepts, and points out the assumptions underlying the construction and use of uniaxial bond laws. A finite element implementation is proposed using 2-D membrane elements. An application example on an interior beam-column joint illustrates the possibilities of this approach.

부착특성과 균열거동을 고려한 철근콘크리트 구조물의 균열폭 계산 (Crack Width Calculation Based on Bond Characteristics and Cracking Behavior of Reinforced Concrete Structures)

  • 양준호;김우;이기열
    • 한국철도학회논문집
    • /
    • 제12권6호
    • /
    • pp.944-952
    • /
    • 2009
  • 이 논문은 철근콘크리트 구조물의 균열폭 계산을 위한 해석적 모델을 제안한 것이다. 철근과 콘크리트 경계면에서 발생하는 실제와 유사한 형태의 부착응력-슬립 특성을 수치적으로 전개하기 위해서 수치해석을 통하여 균열안정화단계에서의 철근과 콘크리트 경계면에서 발생하는 슬립이 선형 분포함을 확인하고, CEB-FIP Model Code 1990과 Eurocode 2에서 제시하고 있는 부착응력-슬립 관계에 적용하였다. 이와 같은 방법을 통하여 균열과 균열 사이에서 철근의 매입길이 방향으로 발생하는 철근과 콘크리트의 변형률 차이가 균열면으로 누적되는 양을 계산할 수 있는 평형방정식을 유도하고, 이로부터 두 재료의 축방향 변형량의 차이로부터 균열폭을 계산할 수 있는 모델을 제안하였다. 이렇게 정식화된 새로운 균열폭 모델을 기존 문헌에 발표된 여러 연구자들의 실험 자료에 적용하여 그 정확성을 검증한 결과, 제안식에 의한 예측값은 현재 사용되고 있는 여러 설계기준의 균열폭 규정으로 계산한 결과에 비하여 실험값을 비교적 정확하게 예측하는 것으로 나타났다.

비선형 부착 특성에 기반한 철근콘크리트 부재의 인장증강효과 모델 (Modeling of Tension Stiffening Effect Based on Nonlinear Bond Characteristics in Structural Concrete Members)

  • 이기열;하태관;김우
    • 콘크리트학회논문집
    • /
    • 제19권6호
    • /
    • pp.745-754
    • /
    • 2007
  • 이 논문은 철근콘크리트 구조 부재의 인장증강효과에 대한 해석적 모델을 제안한 것이다. 이 모델의 정식화를 위해 철근과 콘크리트 경계면에서 발생하는 실제와 유사한 형태의 부착응력과 미끌림 특성과 쪼갬균열의 영향을 고려하였다. 균열 안정화 단계에서의 철근 경계면 미끌림 분포를 선형으로 가정하고, 균열이 발생한 부재의 중앙 단면에서 콘크리트의 분담력이 일정하다는 조건을 CEB-FIP Model Code 1990 및 Eurocode 2에서 제시하고 있는 부착응력-미끌림 관계에 적용하였다. 이로부터 균열 안정화단계에서 부착응력에 의해 철근의 매입길이 방향으로 변화하는 철근의 변형률과 콘크리트 분담력을 계산할 수 있는 평형방정식을 유도하고, 변형적합조건을 고려하여 철근의 평균 변형률과 콘크리트 평균 분담력으로 동시에 표현이 가능한 인장강성 계수를 제안하였다. 이로부터 새롭게 정식화된 인장증강효과 모델을 기존 문헌에 발표된 여러 연구자들의 실험 자료에 적용하여 그 정확성을 검증한 결과, 제안식에 의한 예측값은 실험값을 비교적 정확하게 예측하는 것으로 나타났다.

최적이론에 의하여 설계된 최소 깊이 더블티 댑단부 전단거동 평가 (Evaluation on Shear Behavior of Double-tee Dap-ends with the Least Depth from Optimization Proces)

  • 유승룡;김대훈
    • 콘크리트학회논문집
    • /
    • 제11권4호
    • /
    • pp.43-54
    • /
    • 1999
  • Shear tests are performed on four full-scale 12.5 m proto-type models, "least depth double tee," which are resulted from the optimization process. Domestic superimposed live load regulation, domestic material properties which is available to product. Korean building code requirements, construction environments and economy are considered as the main factors to establish the process. All of the specimens tested fully comply with the shear strength requirements as specified by ACI 318-95. The research has shown following results. 1) The development length requirement of ACI 318-95 does not seem a good predictor for the estimation of bond failure in a beam with the strands below the supports. 2) The load required for the first initial coner cracking in the dap end and first web shear cracking does not seem to have any relation with the dimension and shear strength of the section in the test beams. 3) The strand slip has a direct relationship with the web shear cracking. However, the coner cracking in the dap end does not give any help for the slip in anchorage. 4) Use of whole area for bearing steel at the bottom of dap end is desired for safe bearing pressure design in the precast prestressed double tee beams. 5) The deflection of beam influences directly on the amount of strand slip at the anchorage after initiation of it, and relationship between them are very linear.

압축강도 120 MPa, 단위중량 20 kN/m3 고강도 경량 콘크리트 부착-슬립 거동 평가 (Evaluation of Bond-Slip Behavior of High Strength Lightweight Concrete with Compressive Strength 120 MPa and Unit Weight 20 kN/m3)

  • 구동길;오준환;유성원
    • 한국건설순환자원학회논문집
    • /
    • 제11권1호
    • /
    • pp.39-47
    • /
    • 2023
  • 최근 구조물의 장대화로 인하여 고강도 재료의 경량화 요구가 빈번해지고 있는 실정이다. 하지만 현재까지는 압축강도 120 MPa, 단위중량 20 kN/m3 정도의 고강도 경량 콘크리트를 구조부재에 적용하기 위한 콘크리트와 철근의 부착 특성에 관한 연구가 부족한 실정이다. 따라서 본 논문에서는 압축강도 120 MPa, 단위중량 20 kN/m3 정도의 고강도 경량 콘크리트 108개의 시편을 제작하여 직접 인발 부착실험을 수행하였고, 실험결과와 현행 설계기준과 비교하여 부착특성을 평가하였다. 솔리드버블은 단위중량 감소에 비해서 압축강도 및 탄성계수 감소효과는 상대적으로 적게 나타나, 초경량화를 위해서는 반드시 적용되어야 할 재료로 판단되며, ACI-408R의 부착강도 산정식과 실험결과는 비교적 유사한 것으로 판단되며, 더 낮은 압축강도, 단위중량의 콘크리트보다 더 큰 슬립 및 매개변수 값을 가지는 것으로 나타났다.