• Steel and Composite Structures
• /
• 제14권3호
• /
• pp.229-242
• /
• 2013

Corrosion is important reason for the deterioration of the bond between reinforcing steel and the surrounding concrete. Corrosion of the steel mainly depends on its microstructure. Smooth S220, ribbed S420 and S500 grade reinforcing steels were used in the experiments. Samples were subjected to accelerated corrosion. Pullout tests were carried out to evaluate the effects of corrosion on bond strength of the specimens. S500 grade steel which has tempered martensite microstructure showed lower corrosion rate in concrete than S220 and S420 steels which have ferrite+perlite microstructure. S500 grade steel showed highest bond strength among the other steel grades in concrete. Bond strength between reinforcing steel and concrete increased with increase in the strength of steel and concrete. It also depends on whether reinforcing bar is ribbed or not.

• Structural Engineering and Mechanics
• /
• 제75권4호
• /
• pp.455-464
• /
• 2020

Reinforcement corrosion is one of the major problems in the durability of reinforced concrete structures exposed to aggressive environments. Deterioration caused by reinforcement corrosion reduces the durability and the safety margin of concrete structures, causing excessive costs in managing these structures safely. This paper aims to investigate the effects of reinforcement corrosion on the load bearing capacity deterioration of the corroded reinforced concrete structures. A new analytical method is proposed to predict the crack growth of cover concrete and evaluate the residual strength of concrete structures with corroded reinforcement failing in bond. The structural performance indicators, such as concrete crack growth and flexural strength deterioration rate, are assumed to be a stochastic process for lifetime distribution modelling of structural performance deterioration over time during the life cycle. The Weibull life evolution model is employed for analysing lifetime reliability and estimating remaining useful life of the corroded concrete structures. The results for the worked example show that the proposed approach can provide a reliable method for lifetime performance assessment of the corroded reinforced concrete structures.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.69-84
• /
• 2017

This paper presents results of an experimental investigation on the behaviour of bond between external glass fibre reinforced polymer reinforcement and concrete exposed to three different environmental conditions, namely, temperature cycles, wet-dry cycles and outdoor environment separately for extended durations. Single shear tests (pull-out test) were conducted to investigate bond strengths (pull-out strengths) of control (unexposed) and exposed specimens. Effect of the exposure conditions on the compressive strength of concrete were also investigated separately to understand the effect of changing concrete compressive strength on the pull-out strength. Based on the comparison of experimental results of exposed specimens to control specimens in terms of bond strengths, failure modes and strain profiles, the most significant degradation of pull-out strength was observed in specimens exposed to outdoor environment, whereas temperature cycles did not cause any deterioration of strength.

• 콘크리트학회논문집
• /
• 제24권3호
• /
• pp.259-266
• /
• 2012

일반적인 내진 설계에서는 구조물의 연성적인 거동을 유도하기 위해서 보-기둥 접합부에 인접한 보에 소성힌지가 발생하도록 한다. 따라서 철근콘크리트 부재의 부착강도와 전단강도가 휨강도보다 큰 값을 가져야 하고, 전단이나 부착파괴가 요구된 연성에 도달하기 이전에 발생하지 않아야 한다. 하지만 전단경간비가 짧은 부재의 경우에는 전단이나 부착 거동의 지배를 받는 경우가 많고, 핀칭 효과로 인해 에너지 소산이 비교적 적게 발생하므로 요구된 연성에 도달하지 못하고 파괴될 수 있다. 이 논문에서는 전단경간비가 짧은 철근콘크리트 부재의 거동 분석과 연성 예측, 특히 부착 연성 능력을 평가하기 위한 방법을 제안하였다. 이것은 반복하중에 의해 저감되는 잠재 전단강도와 잠재부착내력 모델, 그리고 소성힌지 형성에 따른 휨부착응력의 급격한 증대를 도식화하여 나타낼 수 있다. 제안된 해석법은 각 값의 변화 추이를 비교하여 부재의 거동을 파악하고, 부착 거동의 지배를 받는 부재의 경우, 부착내력과 휨부착응력의 값이 만나는 지점까지를 그 부재의 부착 연성으로 평가하는 방법이다. 이 방법은 기존에 수행된 8개의 보, 기둥 시험체를 통해 비교 및 검토하였으며 부재 거동에 대한 예측은 정확히 일치하였으나, 부착 연성 능력에 대해서는 과소평가 되었다. 그 이유는 부재의 부착강도를 실제 부착강도보다 비교적 낮게 예측한 부착강도식에서 찾을 수 있으며, 다른 부착 내력 모델에 대한 부착 연성 평가에 대한 연구가 추후 필요할 것으로 사료된다.

• Computers and Concrete
• /
• 제26권2호
• /
• pp.115-125
• /
• 2020

To reduce the damage of concrete in fire, a new type of lightweight cinder aggregate concrete was developed due to the excellent fire resistance of cinder. To further enhance its fire resistance, Polypropylene (PP) Fibers which can enhance the fire resistance of concrete were also used in this type of concrete. However, the bond behavior of this new type of concrete after fire exposure is still unknown. To investigate its bond behavior, 185 specimens were heated up to 22, 200, 400, 600 or 800℃ for 2 h duration respectively, which is followed by subsequent compressive and tensile tests at room temperature. The concrete-rebar bond strength of C30 PP fiber-reinforced cinder concrete was subsequently investigated through pull-out tests after fire exposure. The microstructures of the PP fiber-reinforced cinder concrete and the status of the PP fibre at different temperature were inspected using an advanced scanning electron microscopy, aiming to understand the mechanism of the bonding deterioration under high temperature. The effects of rebar diameter and bond length on the bond strength of PP fiber-reinforced cinder concrete were investigated based on the test results. The bond-slip relation of PP fiber-reinforced cinder concrete after exposure at different temperature was derived based on the test results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.387-390
• /
• 2005

Reinforcement corrosion is the principal cause of deterioration of reinforced concrete. It is to be expected that loss of bond between concrete and tension reinforcement would lead to a reduction in shear strength of RC beams designed to fail in shear. This paper presents results of a FE analysis study to evaluate the shear strength of RC beams with exposed reinforcement represented the limiting condition of bond loss.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.117-122
• /
• 2001

Recently, epoxy-coated re-bar used to the structure partly and put to practical use step, but not economical and appeared to the defect of deterioration of long term bond strength between concrete. The method for complement the defect of epoxy coated re-bar, study of polymer cement slurry coated re-bar started and basic properties appeared to excellent, but study of bond properties embedded in concrete specimens insufficient until now. This study attempts to examination of using possibility for bond strength of polymer cement slurry coated re-bar between concrete specimens compare to ACI Code and KS Code through pull-out test of 15cm$\times$15cm$\times$15cm specimens with polymer cement slurry coated re-bar as polymer cement ratio 50%, 100%, 150%, coating thickness 250${\mu}{\textrm}{m}$, 440${\mu}{\textrm}{m}$ and curing age. In the results of this study, the bond strength of polymer cement slurry coated re-bar compare to plain re-bar, epoxy coated re-bar decreased St/BA-modified polymer cement slurry coated re-bar, but bond strength of PA-modified polymer cement slurry coated re-bar appeared to excellent results. The bond properties of polymer cement slurry coated re-bar between concrete will be obtain more precise results according to compressive strength change of concrete and re-bar diameter size.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.194-200
• /
• 1993

The objective of this study is to clarify analytically the pullout behavior of axial bars from a footing. The bond stress-slip model obtained from the results by the finite element method as well as the pullout tests in massive concrete was used in order to evaluate the slip of bars from the footing. Also, the process of bond mechanism was taken into consideration on order to express the deterioration of bond stress along bars, The shape and magnitude of bond stress distribution depends upon each loading steps. Using equilibrium equation of axial force, $\tau$-S relationship and $\sigma$s-$\varepsilon$s relationship, the differential equations of each loading steps are derived. Applying both boundary and equilibrium conditions to the equations, the amount of slip could be determined. Calculated values on the basis of proposed method evaluation of the slip of bars have a good agreement with the experimental results.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.413-416
• /
• 2005

고분자경화제를 사용한 라이너와 HTPB 추진제의 접착력 및 접착공정을 개선연구를 수행하였다. HTPB와 TDI를 반응시켜 제조된 고분자경화제를 라이너에 사용하면, 접착계면에서 경화제의 이동현상이 줄어든다. 따라서 연소관 준비공정에서 내열재 연마 및 물질이동방지제 도포공정의 생략이 가능하며 HTPB 추진제와 라이너의 접착력이 증가되었다. 또한 가속노화 시험결과 접착력의 저하현상이 관찰되지 않았다.

• 한국추진공학회지
• /
• 제10권2호
• /
• pp.110-114
• /
• 2006

고분자경화제를 사용한 라이너와 HTPB 추진제의 접착력 및 접착공정의 개선연구를 수행하였다. HTPB와 TDI를 반응시켜 제조된 고분자경화제를 라이너에 사용하면, 접착계면에서 경화제의 이동현상이 줄어든다 따라서 연소관 준비공정에서 내열재 연마 및 물질이동방지제 도포공정의 생략이 가능하며 HTPB 추진제와 라이너의 접착력이 증가되었다. 또한 가속노화 시험결과 접착력의 저하현상이 관찰되지 않았다.